Search Results

This specification covers the general requirements for the design, installation, and performance of thermal anti-icing equipment for the wings and empennage surfaces in aircraft.

This specification covers one type of spray equipment for the elimination of ice formation on aircraft windows.

The purpose of this AIR is to compile in one definitive source, commonly accepted calibration, acceptance criteria and procedures for simulation of Supercooled Large Droplet (SLD) conditions within icing wind tunnels. Facilities that meet the criteria for either some or all of the recognized conditions will have known SLD icing simulation capability.

This document contains minimum operational performance specification (MOPS) of active on-board INFLIGHT ICING DETECTION SYSTEMS (FIDS). This MOPS specifies FIDS operational performance which is the minimum necessary to satisfy regulatory requirements for the design and manufacture of the equipment to a minimum standard and guidance towards acceptable means of compliance when installed on an AIRCRAFT. Detection of ICE accreted on the AIRCRAFT during ground operations is not considered in this document. This MOPS was written for the use of FIDS on AIRCRAFT as defined in 1.3 and 2.3. Expected minimum performance specifications for FIDS and their functions are provided in Section 3. The minimum performance requirements as defined in Section 3 do not consider SYSTEM performance as installed on the AIRCRAFT. Performance in excess of the minimum performance may be required by the SYSTEM installed on an AIRCRAFT in order to meet regulatory or operational requirements.

The new standard will establish minimum performance requirements for angle of attack (AOA) and angle of sideslip (AOS) sensors in ice and rain conditions. The new standard will cover the various sensor technologies used to measure these flow angles and is limited to the sensor itself as defined from the portion of the sensor that is directly exposed to the ice and rain environment to the means by which its output is relayed to the relevant aircraft systems. The user of this standard must evaluate the aircraft level installation requirements for the probe to ensure adequate coverage for the application. It may be necessary to modify the test conditions in order to meet the applicable installation requirements.

A review of icing materials that would be educational to a designer of a UAV ice protection system is provided. Additionally, the differences between unmanned and manned ice protection systems are explored along with a discussion on how these differences can be addressed.

This document provides information on current practices for testing air data probes to 14 CFR Part 33 Appendix D ice crystal and mixed phase icing conditions. This AIR is primarily concerned with techniques for measuring the flow and icing environment in the test facility. While the focus of this report is the testing of air data probes, techniques described may be applicable to Appendix D tests of other aerospace equipment as well.

Consolidate ice adhesion & accretion (and shedding) testing methods & define their applicability to real world icing conditions (need to define the attributes & processes) Document the physics governing ice adhesion strengths & accretion behaviors Define characteristics of ice formed in a range of atmosphere conditions Propose testing methods & facility requirements capable of differentiating ice adhesion consistently Define material properties affecting ice adhesion, including surface characteristics, preparation methods, and degradation Definitions of terminologies (ice types, atmosphere conditions, accretion dynamics, strengths & applicability (shear, tensile etc.), passive ice protection vs. active ice protection, etc.)

This document is intended to serve two purposes: (1) provide a list of topics for potential customers to ask of the facility to aid their selection decision-making, and (2) provide a list of icing wind tunnel and engine test stand facilities that simulate flight through icing or ice crystal clouds.

This document provides information, guidelines, and practices for the application, use, and administration of two-dimensional and three-dimensional droplet impingement and ice accretion computer codes. The codes provide computational simulations of inflight icing that predict droplet trajectory, water loading, and ice accretion on aircraft components. These ice accretion characteristics are used during the aircraft design and certification process.

This specification covers the general requirements for pneumatic deicing systems for wings, empennages, radomes, radio masts, air induction system entrance cones, and ducts of aircraft. Deicing boots shall be of one type, operating at 15 to 22 psig pressure.

Develop an Aerospace Recommended Practice that describes means of certification compliance for approval of passive rotorcraft engine/APU induction system ice protection (inadvertent and full icing).

This SAE Aerospace Information Report (AIR) provides various graphical displays of atmospheric variables related to aircraft icing conditions in natural clouds. It is intended as a review of recent developments on the subject, and for stimulating thought on novel ways to arrange and use the available data. Included in this Report is FAR 25 (JAR 25) Appendix C, the established Aircraft Icing Atmospheric Characterization used for engineering design, development, testing and certification of civilian aircraft to fly in aircraft icing conditions.

This document provides information regarding ice detector technology and design. The SAE document AS5498 provides detailed information regarding the requirements, specifications, qualification, and certification of icing detection systems. This document is not meant to replace AS5498, but to enhance it by considering unique aspects of sensing technology and, in particular, those that may not be certificated at the time of this revision. To that end, an effort has been made not to duplicate information contained in AS5498. Icing rate information is included where applicable. The primary application is associated with ice forming on the leading edges of airfoils and inlets while the aircraft is in flight. Information related to detection of ice over cold fuel tanks and icing at low-velocity operation is included. The material is primarily applicable to fixed-wing aircraft. Unique requirements for engine inlets and rotorcraft are also provided.