Refine Your Search

Date

Date

Topic

Topic

AE-5A Aerospace Fuel, Inerting and Lubrication Sys Committee Fuel systems

Search Results

Viewing 1 to 20 of 68
123Next >Last >>
Sort by title
Standard

Thesaurus for Fuel System Components
2007-12-04
HISTORICAL
AIR1615A
This document provides a summary of names commonly used throughout the industry for aircraft fuel system components. It is a thesaurus intended to aid those not familiar with the lexicon of the industry.
Standard

Thesaurus for Fuel System Components
2020-02-24
CURRENT
AIR1615B
This document provides a summary of names commonly used throughout the industry for aircraft fuel system components. It is a thesaurus intended to aid those not familiar with the lexicon of the industry.
Standard

Self-Sealing Breakaway Valves for Crash-Resistant Aircraft Fuel Systems
2020-03-19
CURRENT
AIR1616B
MIL-STD-1290, 14 CFR 27.952, and 14 CFR 29.952 provide crash resistant fuel system design and test criteria that significantly minimize fuel leaks and occurrence of post-crash fire in survivable impacts. This document does not change and does not authorize changes in or deviations from MIL-Standard or regulatory requirements. This document provides guidance for the design, performance, and test criteria for self-sealing breakaway valves.
Standard

Recommendations for Fuel and Oil System Schematics
2019-05-07
CURRENT
ARP1482B
This document recommends and sets forth a set of symbols representing the components making up aircraft fuel and oil systems. The intended result is uniformity in system schematics so that they may be easily understood throughout the aerospace industry.
Standard

Optical equipment safety in fuel tanks
2018-11-15
WIP
ARP7977
This project aims to develop a framework of requirements which support safe installation and operation of optical devices within an aircraft fuel tank, specifically: 1: To determine optical power and energy limits which ensure safe operation of optical installations within an aircraft fuel tank over aircraft life and under all phases of flight, taking the limits provided in IEC 60079-28:20015 as a starting point. 2: To demonstrate optical and electrical power and energy equivalences, where possible. 3: To determine requirements for optical installations, including bonding and electrostatic discharge for non-conductive components such as optical fibres. 4: To provide guidelines for analysis of the hazards presented by the typical internal components of optical devices, such as failure modes of photo diodes and cells.
Standard

Minimization of Electrostatic Hazards in Aircraft Fuel Systems
2013-08-09
HISTORICAL
AIR1662A
This SAE Aerospace Information Report (AIR) provides background information, technical data and related technical references for minimization of electrostatic hazards in aircraft fuel systems. Techniques used to minimize the electrostatic hazard include: a Reducing fueling rate into tank bays including use of multiple refueling inlet nozzles. b Reducing refuel plumbing flow velocities. c Introducing fuel into the tank at a low velocity near the bottom and directing it to impinge upon a grounded conducting surface. d Avoiding electrically isolated conductors in the fuel tank. e Using conductivity additives in the fuel.
Standard

Method-Pressure Drop Tests for Fuel System Components
2020-05-18
CURRENT
ARP868D
This document describes recommended methods, associated equipment, and test setups to assist in understanding and conducting pressure drop tests on fuel system components. Background information and suggestions are provided to improve accuracy and repeatability of test results. Although written specifically for fuel system components, the methods, equipment, and suggestions presented herein apply equally to pressure drop tests conducted on any equipment utilizing incompressible fluids.
Standard

Method-Pressure Drop Tests for Fuel System Components
2013-08-09
HISTORICAL
ARP868C
This document provides recommended methods and describes associated equipment and test setups to assist in understanding and conducting pressure drop tests on fuel system components. Background information and suggestions are provided as means of improving accuracy and repeatability of test results. Although written specifically for fuel system components, the methods, equipment and suggestions presented herein apply equally to pressure drop tests of other liquid-handling devices.
Standard

METHOD - PRESSURE DROP TESTS FOR FUEL SYSTEM COMPONENTS
1994-09-01
HISTORICAL
ARP868B
To describe useful methods for conducting pressure drop tests of fuel system components for MIL-F-8615 or similar requirements and to present general suggestions for improving accuracy of test results.
Standard

METHOD - PRESSURE DROP TESTS FOR FUEL SYSTEM COMPONENTS
1983-06-01
HISTORICAL
ARP868A
To describe useful methods for conducting pressure drop tests of fuel system components for MIL-F-8615 or similar requirements; and to present general suggestions for improving accuracy of test results.
Standard

Impact of Changes in Test Dust Contaminants and Particle Counter Calibration on Laboratory Filter Element Performance and Fluid Cleanliness Classes
2003-07-03
HISTORICAL
AIR5455
This SAE Aerospace Information Report (AIR) discusses the impact of the ISO Test Dusts, chosen as replacement contaminants for the Arizona Test Dusts (AC Test Dusts), and the ISO calibration procedure ISO 11171 for automatic particle counters, which replaces the calibration procedure ISO 4402 (1991), on laboratory performance of filter elements utilized in aerospace lubrication, hydraulic and fuel systems, and fluid cleanliness levels determined with automatic particle counters.
Standard

Impact of Changes in Test Dust Contaminants and Particle Counter Calibration on Laboratory Filter Element Performance and Fluid Cleanliness Classes
2012-01-03
CURRENT
AIR5455A
This SAE Aerospace Information Report (AIR) discusses the impact of the ISO Test Dusts, chosen as replacement contaminants for the Arizona Test Dusts (AC Test Dusts), and the ISO calibration procedure ISO 11171 for automatic particle counters, which replaces the calibration procedure ISO 4402 (1991), on laboratory performance of filter elements utilized in aerospace lubrication, hydraulic and fuel systems, and fluid cleanliness levels determined with automatic particle counters.
Standard

Guidance on the Impact of Fuel Properties on Fuel System Design and Operation
2018-02-24
CURRENT
AIR7484
This document describes a number of jet fuel properties and where applicable gives the specification limits for Jet A and Jet A-1, though the properties are generally applicable to all turbine fuels. Later versions of this document will give more details on specification limits for other similar fuels, such as TS-1, where they differ from Jet A and Jet-A1. It gives details about the possible impact on airframe fuel system design.
Standard

Guidance for the Design and Installation of Fuel Quantity Indicating Systems (FQIS)
2022-10-07
CURRENT
AIR5691B
This document is applicable to commercial and military aircraft fuel quantity indication systems. It is intended to give guidance for system design and installation. It describes key areas to be considered in the design of a modern fuel system and builds upon experiences gained in the industry in the last 10 years.
Standard

Guidance for the Design and Installation of Fuel Quantity Indicating Systems
2017-05-18
HISTORICAL
AIR5691A
This document is applicable to commercial and military aircraft fuel quantity indication systems. It is intended to give guidance for system design and installation. It describes key areas to be considered in the design of a modern fuel system, and builds upon experiences gained in the industry in the last 10 years.
123Next >Last >>
X