Refine Your Search

Date

Date

Topic

Topic

AGE-2 Air Cargo Hydraulic fluids Vehicle dynamics Medical, health, and wellness

Search Results

Viewing 1 to 20 of 81
123Next >Last >>
Sort by title
Standard

Vehicle Transport Unit Load Device (ULD)
2020-11-30
CURRENT
ARP1554D
The tests are static in nature to minimize complexity and cost of required testing facilities. As far as practical, applied static loads should take into account the combined static and dynamic loads anticipated in service. It is intended that tests shall be non-destructive in nature and not result in damage unless ultimate load conditions are employed. Test equipment and methods of testing described are not meant to be restrictive. Alternate equivalent methods to accomplish the desired results may be employed. In selected cases, tests may be repeated under ultimate load conditions when required for substantiation of analytical data. If this becomes necessary, the parts deformed may be removed and replaced prior to the retest.
Standard

Universal Turnover Build-Up Stand for Small Propulsion Units Requiring Vertical Assembly
2012-12-05
CURRENT
ARP863B
This recommended practice covers a stand that may be used for assembly, disassembly, and maintenance. The stand incorporates the following design criteria: complete interchangeability of any and all components, collapsible frame construction, envelope dimensions (marked with an asterisk on the attached drawings), attachment pad configuration, and gearbox and caster specifications.
Standard

Universal Horizontal Field Maintenance Stand for 10,000 pound Weight Class Propulsion Units (48 inch and 30 inch Rail Gage)
2012-12-05
CURRENT
ARP581B
This recommended practice covers a rail concept stand that may be used for horizontal disassembly and reassembly, and maintenance, incorporating certain design features which are defined herein. These features include the rail dimensions and width, length and height of stand to insure compatibility with rail concept type transport and positioning trailers.
Standard

ULD for Aircraft Transportation of Horses
2012-11-26
HISTORICAL
ARP1621B
This SAE Aerospace Recommended Practice (ARP) defines minimum requirements for an aircraft transport ULD to transport horses properly and safely by air, to protect the horse(s) from injuries, and to protect the aircraft from corrosion created by waste spill. The ULD is designed to accommodate one horse or several. There are two types of ULDs for aircraft transportation of horses: a Type 1: The ULD is an airworthiness certified structural container, satisfying the requirements of NAS 3610 for the appropriate base size. b Type 2: The ULD consists of a self-contained stall which is positioned on a standard aircraft pallet and restrained to the pallet by means of a cargo pallet net or by straps. WARNING: It is the carrier’s responsibility to obtain airworthiness approval for a Type 2 unit using strap-restraint. Refer to 7.1 b (Documentation).
Standard

ULD for Aircraft Transportation of Horses
2017-09-11
CURRENT
ARP1621C
This SAE Aerospace Recommended Practice (ARP) defines minimum requirements for an aircraft transport ULD to transport horses properly and safely by air, to protect the horse(s) from injuries, and to protect the aircraft from corrosion created by waste spill. The ULD is designed to accommodate one horse or several. There are two types of ULDs for aircraft transportation of horses:
Standard

ULD FOR AIRCRAFT TRANSPORTATION OF HORSES
1980-03-01
HISTORICAL
ARP1621
This ARP defines minimum requirements for horse stalls necessary to maintain a structurally safe operation and protect aircraft from corrosion created by waste spills.
Standard

ULD FOR AIRCRAFT TRANSPORTATION OF HORSES
1990-08-01
HISTORICAL
ARP1621A
This SAE Aerospace Recommended Practice (ARP) defines minimum requirements for an aircraft transport ULD to transport horses properly and safely by air, to protect the horse(s) from injuries and to protect the aircraft from corrosion created by waste spill. The ULD is designed to accommodate one horse or several. There are two types of ULDs for aircraft transportation of horses: a Type 1: The ULD is an airworthiness certified structural container, satisfying the requirements of NAS 3610 for the appropriate base size. b Type 2: The ULD consists of a self-contained stall which is positioned on a standard aircraft pallet and restrained to the pallet by means of a cargo pallet net or by straps.
Standard

Shipping Caps, Covers and Plugs
2017-11-06
CURRENT
ARP5862
The primary purpose of the shipping closure is to protect the aircraft parts or system from damage and foreign material ingress/egress (e.g., dust, dirt or other contaminants) during transport and storage. Shipping closures are not airworthy items. Therefore, their usage is defined as preventative for the parts to be protected as opposed to operational. Military and commercial customer requirements for the prevention of damage or contamination to stored parts are generally limited to the generic instructions “all openings should be sufficiently covered to prevent the entrance of dust, dirt, moisture or other foreign contaminants”. This recommended practice outlines basic minimum parameters for suggested item construction and usage. Additionally, this recommended practice provides instruction on how to apply these closures to various openings.
Standard

REQUIREMENTS FOR AIRCRAFT ON BOARD WEIGHT AND BALANCE SYSTEM
1995-06-01
HISTORICAL
ARP1409B
This SAE Aerospace Recommended Practice (ARP) establishes requirements for the function, characteristics, and installation of an aircraft On Board Weight and Balance System (OBWBS) for use on civil transport aircraft. This document is not intended to specify design methods, mechanisms, or material to accomplish the requirements set forth.
Standard

Interline Air Cargo Pallets
2012-09-05
HISTORICAL
AS1491A
This document establishes dimensional, structural and environmental requirements for two types of interline pallets. Type II covers NAS 3610 code sizes and Type III covers other sizes not currently included in NAS 3610.
Standard

Interline Air Cargo Pallets
2023-01-13
CURRENT
AS1491B
This SAE Aerospace Standard specifies the dimensional, design criteria, fabrication, performance, operational, environmental, and testing requirements for interline pallets requiring airworthiness approval for loading onto civil transport aircraft equipped with NAS3610/AS36100 restraint systems and using pallet nets meeting the requirements of AS1492. Type II/2 covers NAS3610/AS36100 code sizes. Type III pallets have been removed from this SAE Aerospace Standard revision.
Standard

Interline Air Cargo Pallet Nets
2023-01-13
CURRENT
AS1492C
This document establishes dimensional, structural, and environmental requirements for Type II/2 interline pallet nets. Type II/2 covers NAS3610/AS36100 code sizes.
Standard

General Requirements for Powered Drive Units (PDUs) in Aircraft Cargo Systems
2012-11-01
HISTORICAL
AIR4165A
This SAE Aerospace Information Report (AIR) is intended to assist the user (aircraft manufacturer/airline) in the following areas: a In the decision of whether or not to plan for the installation of a powered drive system in the cargo loading system (CLS) during the definition of the aircraft on-board cargo loading system. b If a powered drive system is decided upon, to provide general requirements to be considered during the preparation of component specifications for the powered drive units (PDUs) to be used. This provides a selection of criteria in order to obtain an optimum PDU for the application considered.
Standard

General Requirements for Powered Drive Units (PDUs) in Aircraft Cargo Systems
2019-10-02
CURRENT
AIR4165B
This SAE Aerospace Information Report (AIR) is intended to assist the user (aircraft manufacturer/airline) in the following areas: a In the decision of whether or not to plan for the installation of a powered drive system in the cargo loading system (CLS) during the definition of the aircraft on-board cargo loading system. b If a powered drive system is decided upon, to provide general requirements to be considered during the preparation of component specifications for the powered drive units (PDUs) to be used. This provides a selection of criteria in order to obtain an optimum PDU for the application considered.
Standard

General Requirements for Noncertified Cargo/Baggage Containers
2018-10-18
CURRENT
AS1677D
This SAE Aerospace Standard (AS) covers the design, fabrication, performance and operational testing requirements for lower deck containers for use in main line aircraft which do not require airworthiness certification when loaded under the conditions of compartment restraint and in accordance with the aircraft's Weight and Balance Manual and/or, where applicable according to the aircraft type's approved Weight and Balance Manual, AS36100A or NAS 3610 equivalent base plate restraint for these containers. Most sizes of containers covered by this document (base sizes K, L, P, and Q) cannot physically be loaded and latched on aircraft main deck cargo systems. Base size A and M containers can, but are not allowed on aircraft main decks, which do not accept non-certified units. Accordingly, all containers covered by this document are to be used/installed exclusively in aircraft lower deck compartments.
Standard

General Requirements for Noncertified Cargo/Baggage Containers
2008-06-22
HISTORICAL
AS1677C
This SAE Aerospace Standard (AS) covers the requirements for lower deck containers in wide body and standard body aircraft which do not require airworthiness certification under the condition of compartment restraint and/or, where applicable according to aircraft type, NAS3610 equivalent baseplate-restraint for these containers. NOTE: IATA 50/0, “Requirements for interlining of ULDs”, should also be taken into account when designing and making equipment.
123Next >Last >>
X