Search Results

Standard

Vehicle Transport Unit Load Device (ULD)

2020-11-30

CURRENT

ARP1554D

The tests are static in nature to minimize complexity and cost of required testing facilities. As far as practical, applied static loads should take into account the combined static and dynamic loads anticipated in service. It is intended that tests shall be non-destructive in nature and not result in damage unless ultimate load conditions are employed. Test equipment and methods of testing described are not meant to be restrictive. Alternate equivalent methods to accomplish the desired results may be employed. In selected cases, tests may be repeated under ultimate load conditions when required for substantiation of analytical data. If this becomes necessary, the parts deformed may be removed and replaced prior to the retest.

Standard

Universal Leak Detector

2005-10-28

CURRENT

ARP726A

This recommended practice covers a self-contained detection system which is capable of pressurizing a closed system up to 70 psig with halogen (tracer) gas and up to 3500 psig with nitrogen.

Standard

Tie Downs, Cargo, Aircraft

2000-11-01

HISTORICAL

AS25959

This specification covers four types of aircraft cargo tie downs.

Standard

Tie Down, Cargo, Aircraft, Type C-2

1997-08-01

HISTORICAL

AS6480

This specification covers one type of aircraft cargo tie down, designated Type C-2.

Standard

Tie Down, Cargo, Aircraft, Type C-2

2013-03-15

CURRENT

AS6480B

This specification covers one type of aircraft cargo tie down, designated Type C-2.

Standard

Tie Down, Cargo, Aircraft, Nylon Web Net

2000-11-01

HISTORICAL

AS26780

This specification covers two types of aircraft cargo tie downs, each having a capacity of 10,000 pounds.

Standard

Tie Down Assembly, Helicopter Blade, General Specification For

2017-11-03

CURRENT

AS85075

This specification covers the tie down assemblies for use on helicopter blades.

Standard

Stand, Shipboard, Helicopter Maintenance

2017-11-06

CURRENT

AS85376

This specification covers a helicopter maintenance stand used by personnel aboard aviation capable ships.

Standard

Nomenclature Guide for Propulsion Systems Support Equipment

2012-12-05

CURRENT

ARP480C

This document lists recommended noun titles for drawings of support equipment and provides definitions for each. The use of secondary modifiers to distinguish a part from similar parts is also covered.

Standard

Net, Cargo Tiedown, Pallets, HCU-7/E, HCU-15/C, HCU-11/C, and HCU-16/C

2000-11-01

HISTORICAL

AS27444

This specification covers pallet cargo tiedown nets, designated HCU-7/E, HCU-15/C, HCU-11/C and HCU-16/C.

Standard

Interline Air Cargo Pallets

2012-09-05

HISTORICAL

AS1491A

This document establishes dimensional, structural and environmental requirements for two types of interline pallets. Type II covers NAS 3610 code sizes and Type III covers other sizes not currently included in NAS 3610.

Standard

Interline Air Cargo Pallet Nets

2023-01-13

CURRENT

AS1492C

This document establishes dimensional, structural, and environmental requirements for Type II/2 interline pallet nets. Type II/2 covers NAS3610/AS36100 code sizes.

Standard

INTERLINE AIR CARGO PALLETS

1982-03-01

HISTORICAL

AS1491

This document establishes dimensional, structural and environmental requirements for 1.5G interline pallets.

Standard

Fittings, Cargo Tiedown, Aircraft

2006-04-27

HISTORICAL

AS7092A

This specification covers the requirements for one type of tiedown fitting for installation in the floors of aircraft.

Standard

Fittings, Cargo Tiedown, Aircraft

2012-10-15

CURRENT

AS7092B

This specification covers the requirements for one type of tiedown fitting for installation in the floors of aircraft.

Standard

Fittings, Cargo Tiedown, Aircraft

1999-07-01

HISTORICAL

AS7092

This specification covers the requirements for one type of tiedown fitting for installation in the floors of aircraft.

Standard

Fire Resistant Container Design, Performance, and Testing Requirements

2020-10-27

CURRENT

AS8992

This Aerospace Standard (AS) specifies the minimum design and performance criteria and testing methods of passive fire resistant containers (FRCs) used either: a In those cargo compartments of civil transport aircraft where they constitute one means of complying with applicable airworthiness regulations, or b On a voluntary basis, when deemed appropriate by operators to improve fire protection in aircraft cargo compartments where airworthiness regulations do not mandate their use.

Standard

Fire Containment Cover - Design, Performance, and Testing Requirements

2021-12-13

CURRENT

AS6453A

This SAE Aerospace Standard (AS) specifies the minimum design and performance criteria and testing methods of fire containment covers (FCCs) used either: a In those cargo compartments of civil transport aircraft where they constitute one means of complying with applicable airworthiness regulations, or b On a voluntary basis, when deemed appropriate by operators to improve fire protection in aircraft cargo compartments where airworthiness regulations do not mandate their use.

Standard

Fire Containment Cover - Design, Performance, and Testing Requirements

2013-08-06

HISTORICAL

AS6453

This SAE Aerospace Standard (AS), identical to ISO 14186, specifies the minimum design and performance criteria and testing methods of fire containment covers (FCCs) used either: a in those cargo compartments of civil transport aircraft where they constitute one means of complying with applicable airworthiness regulations, or b on a voluntary basis, when deemed appropriate by operators to improve fire protection in aircraft cargo compartments where airworthiness regulations do not mandate their use.

Standard

Drum, Metal Reusable, Shipping and Storage (Cap. from 88 to 510 Cubic Inches)

2017-11-06

CURRENT

AS6055

This specification covers the requirements for new reusable cylindrical drums consisting of body, cover, gasket, and closing device(s) to be used as interior and exterior shipping containers.