Refine Your Search

Topic

Search Results

Standard

Vacuum Bagging of Thermosetting Composite and Metalbond Repairs

2018-01-10
CURRENT
ARP5143A
This Aerospace Recommended Practice (ARP) describes methods of vacuum bagging, a process used to apply pressure in adhesive bonding and heat curing of thermosetting composite materials and metalbond for commercial aircraft parts. If this document is used for the vacuum bagging of other than thermosetting composite materials and metalbond, the fitness for this purpose must be determined by the user. The methods shall only be used when specified in an approved Repair Document or with the agreement of the Original Equipment Manufacturer (OEM).
Standard

DRYING OF THERMOSETTING COMPOSITE MATERIALS

1996-08-01
CURRENT
ARP4977
This SAE Aerospace Recommended Practice (ARP) describes standard methods for drying commercial aircraft composite structures prior to repair and gives general guidelines on use and applicability. It addresses the removal of liquids that have collected inside the structures through open damage, microcracks, or porosity and the removal of absorbed moisture from the composite material. The methods described in this document shall only be used when specified in an approved repair document or with the agreement of the original equipment manufacturer (OEM) or regulatory authority. If this document is used for the drying of materials other than thermosetting composite materials, the fitness for this purpose must be determined by the user.
Standard

Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 5 - Material Specification: Carbon Fiber Fabrics, Plain Weave, 193 g/m2, and Epoxy Resin

2006-01-26
HISTORICAL
AMS2980/5
This Material Specification defines the requirements of carbon fiber fabric and epoxy resin systems used for wet lay-up repair of carbon fiber reinforced epoxy structures, qualified according to AMS 2980/1 and 2980/2. Unless otherwise specified by the drawing, the order or the inspection schedule, the present specification shall be used in conjunction with the referenced documents.
Standard

Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 5 - Carbon Fiber Fabrics, Plain Weave, 193 g/m2, and Epoxy Resin

2014-04-11
CURRENT
AMS2980/5A
This Material Specification defines the requirements of carbon fiber fabric and epoxy resin systems used for wet lay-up repair of carbon fiber reinforced epoxy structures, qualified according to AMS2980/1 and AMS2980/2. Unless otherwise specified by the drawing, the order or the inspection schedule, the present specification shall be used in conjunction with the referenced documents.
Standard

Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 6 - Material Specification: Carbon Fiber Fabric Reinforced Epoxy Prepreg for Repair, Plain Weave Fabric, 193 g/m2, Adhesive Film for Repair and Non-Structural Glass Fiber Fabric Reinforced Epoxy Prepreg, 105 g/m2

2011-04-01
CURRENT
AMS3970/6
This Material Specification defines the requirements of carbon fiber reinforced epoxy prepreg for repair, 120 °C (250 °F) Vacuum curing, Plain Weave Fabric, 193 g/m2 and a companion non-structural glass fiber fabric reinforced epoxy prepreg, 105 g/m2, qualified according to AMS3970/1 and AMS3970/2 for aerospace application. The prepreg system may include an epoxy film adhesive to be applied in a co-curing process with the prepreg for joint and sandwich bonding. The need for a film adhesive shall be established during screening tests. If included, the requirements to be met by the adhesive are also defined in this document.
Standard

Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 1 - General Requirements

2011-04-06
CURRENT
AMS3970/1A
AMS3970/1 gives information about the technical requirements and qualification procedure for carbon fiber fabric epoxy prepreg and a companion non-structural glass prepreg used for repair of carbon fiber reinforced epoxy structures. The prepreg system may include a film adhesive to be applied in a co-curing process with the prepreg for joint and sandwich bonding. The need for a film adhesive shall be established during screening tests.
X