Search Results

Standard

Dendrite Arm Spacing of Structural Aircraft Quality D357 Aluminum Alloy Castings, Determination and Acceptance of

2007-08-17

ARP1947B

This document covers the recommended practice for determining the acceptability of the dendrite arm spacing (DAS) of D357-T6 aluminum alloy castings required to have tensile strength not lower than 50,000 psi (345 MPa).

Standard

Dendrite Arm Spacing of Structural Aircraft Quality D357 Aluminum Allow Castings, Determination and Acceptance of

2018-08-22

ARP1947C

This document covers the recommended practice for determining the acceptability of the dendrite arm spacing (DAS) of D357-T6 aluminum alloy castings required to have tensile strength not lower than 50000 psi (345 MPa).

Standard

DENDRITE ARM SPACING OF STRUCTURAL AIRCRAFT QUALITY D357 ALUMINUM ALLOY CASTINGS, DETERMINATION AND ACCEPTANCE OF

1996-07-01

ARP1947A

This document covers the recommended practice for determining the acceptability of the dendrite arm spacing (DAS) of D357-T6 aluminum alloy castings required to have tensile strength not lower than 50,000 psi (345 MPa).

Standard

DENDRITE ARM SPACING OF STRUCTURAL AIRCRAFT QUALITY D357 ALUMINUM ALLOY CASTINGS, DETERMINATION AND ACCEPTANCE OF

1985-10-01

ARP1947

This document covers the recommended practice for determining the acceptability of the dendrite arm spacing (DAS) of D357-T6 aluminum alloy castings required to have tensile strength not lower than 50,000 psi (345 MPa).

Standard

BEARINGS, SINTERED, METAL POWDER 89Cu - 10Sn Oil Impregnated.

1949-11-01

AMS4805A

Standard

BEARINGS, SINTERED METAL POWDER 89Cu - 10Sn - Oil Impregnated

1951-06-01

AMS4805B

Standard

Aluminum Alloy, Hand Forgings, 5.6zn 2.5mg 1.6cu 0.24cr

1981-01-01

AMS4109A

SUPERSEDING SPECIFICATION: The requirements of this specification are embodied in the latest issue of AMS 4149, ALUMINUM ALLOY FORGINGS, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T736), Solution and Precipitation Heat Treated. The requirements of the latest issue of AMS 4149 shall be fulfilled whenever reference is mad to this specification.

Standard

Aluminum Alloy, Hand Forgings, 5.6zn 2.5mg 1.6cu 0.23cr, Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated

2003-03-12

MAM4323B

This specification covers an aluminum alloy in the form of hand forgings procured to metric dimensions. AMS 4323 is the inch/pound version of this MAM. These forgings have been used typically for parts requiring a high level of mechanical properties and good resistance to stress-corrosion cracking, but usage is not limited to such applications.

Standard

Aluminum Alloy, Hand Forgings and Rolled Rings 1.0mg 0.60si 0.28cu 0.20cr Solution Heat Treated, Stress Relieved By Compression, and Precipitation Heat Treated

2003-03-12

MAM4248B

This specification covers an aluminum alloy in the form of hand forgings and rolled rings procured to metric (SI) dimensions. These products have been used typically for complex shaped parts requiring moderate strength and good forgeability of the alloy and where stability is required during machining, but usage is not limited to such applications. Corrosion resistance of this alloy is superior to that of aluminum alloys having copper as the principal alloying element.

Standard

Aluminum Alloy, Hand Forgings 7.7zn 2.4mg 1.6cu 0.16cr (7049-T7352) Solution Heat Treated, Stress Relieved By Compression, and Precipitation Heat Treated

2003-03-12

MAM4247B

This specification covers an aluminum alloy in the form of hand forgings procured to metric dimensions. AMS 4247 is the inch/pound version of this MAM. These forgings have been used typically for parts requiring a combination of high strength and resistance to stress-corrosion cracking and for parts requiring stability during machining, but usage is not limited to such applications.

Standard

Aluminum Alloy, Forgings 7.8Zn - 2.2Mg - 1.6Cu - 0.15Cr (7249-T74 and -T7452)

2012-04-02

AMS4334A

This specification covers an aluminum alloy in the form of die forgings, hand forgings, and forging stock.

Standard

Aluminum Alloy, Forgings 7.8Zn - 2.2Mg - 1.6Cu - 0.15Cr (7249-T74 and -T7452)

2017-04-21

AMS4334B

This specification covers an aluminum alloy in the form of die forgings, hand forgings, and forging stock.

Standard

Aluminum Alloy, Die and Hand Forgings, Rolled Rings, and Forging Stock 2.3Cu - 1.6Mg - 1.1Fe - 1.0Ni - 0.18Si - 0.07Ti (2618-T61) Solution and Precipitation Heat Treated

2008-12-15

AMS4132F

This specification covers an aluminum alloy in the form of die forgings, hand forgings, rolled rings, and forging stock.

Standard

Aluminum Alloy, Die and Hand Forgings, Rolled Rings, and Forging Stock 2.3Cu - 1.6Mg - 1.1Fe - 1.0Ni - 0.18Si - 0.07Ti (2618-T61) Solution and Precipitation Heat Treated

2013-02-07

AMS4132G

This specification covers an aluminum alloy in the form of die forgings, hand forgings, rolled rings, and forging stock.

Standard

Aluminum Alloy, Die and Hand Forgings 5.6zn 2.5mg 1.6cu 0.23cr Solution Heat Treated and Aged

2003-03-12

MAM4131B

This specification covers an aluminum alloy in the form of die forgings and hand forgings procured to metric (SI) units. AMS 4131 is the inch/pound verison of this MAM. These forgings have been used typically for parts requiring a combination of good strength and resistance to stress-corrosion cracking, but usage is not limited to such applications.

Standard

Aluminum Alloy, Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T74) Solution and Precipitation Heat Treated

2023-12-13

AMS4149F

This specification covers an aluminum alloy in the form of die and hand forgings 6.000 inches (152.00 mm) and under in nominal thickness at time of heat treatment (see 8.6).

Standard

Aluminum Alloy, Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T74) Solution and Precipitation Heat Treated

1998-03-01

AMS4149C

This specification covers an aluminum alloy in the form of die and hand forgings.

Standard

Aluminum Alloy, Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T74) Solution and Precipitation Heat Treated

2010-05-19

AMS4149D

This specification covers an aluminum alloy in the form of die and hand forgings.

Standard

Aluminum Alloy, Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T74) Solution Heat Treated and Aged

2019-09-03

AMS4131E

This specification covers an aluminum alloy in the form of die forgings and hand forgings up to 6.000 inches (152.40 mm) in nominal thickness at the time of heat treatment (see 8.4).

Standard

Aluminum Alloy, Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T74) Solution Heat Treated and Aged

2011-11-03

AMS4131D

This specification covers an aluminum alloy in the form of die forgings and hand forgings.