Refine Your Search

Search Results

Standard

Steel, Corrosion and Resistant, Bars, Forgings, and Wire 17cr 0.52mo (0.95-1.20c) (SAE 51440c) for Bearing Applications

2000-12-01
HISTORICAL
AMS5880B
This specification covers a corrosion-resistant steel in the form of bars, wire, forgings, and forging stock. These products have been used typically for anti-friction bearing parts requiring resistance to both corrosion and wear with hardness usually not lower than 58 HRC after hardening and tempering, but usage is not limited to such applications.
Standard

Steel, Corrosion Resistant, Bars, Wire, Forgings, and Tubing 14.5Cr - 4.0Mo - 1.2V (1.10-1.20C) Premium Quality For Bearing Applications, Double Vacuum Melted

1992-07-01
HISTORICAL
AMS5749C
This specification covers a premium aircraft-quality, corrosion-resistant steel in the form of bars, wire, forgings, mechanical tubing, and forging stock. These products have been used typically for parts requiring a through-hardening, corrosion-resistant steel, operating under heavy loads at high speeds, requiring resistance to wear and softening at elevated temperatures, and subject to very rigid inspection standards, but usage is not limited to such applications.
Standard

Steel Cleanliness, Aircraft Quality, Martensitic Corrosion-Resistant Steels, Magnetic Particle Inspection Procedure, Metric (SI) Measurement

1991-10-01
HISTORICAL
MAM2303
This specification covers steel cleanliness requirements in SI (Metric) units for aircraft-quality, ferromagnetic, hardenable, corrosion-resistant steels as determined by magnetic particle inspection methods. This specification contains sampling, specimen preparation, and inspection procedures and cleanliness rating criteria.
Standard

Steel Cleanliness, Aircraft Quality, Martensitic Corrosion-Resistant Steels, Magnetic Particle Inspection Procedure, Metric (SI) Measurement

2007-07-19
CURRENT
MAM2303E
This specification covers steel cleanliness requirements in SI (Metric) units for aircraft-quality, ferromagnetic, hardenable, corrosion-resistant steels as determined by magnetic particle inspection methods. This specification contains sampling, specimen preparation, and inspection procedures and cleanliness rating criteria.
Standard

Steel Cleanliness, Aircraft Quality, Martensitic Corrosion-Resistant Steels, Magnetic Particle Inspection Procedure

1991-10-01
HISTORICAL
AMS2303B
This specification covers steel cleanliness requirements for aircraft-quality ferro-magnetic, hardenable corrosion-resistant steels by magnetic particle inspection methods. Applicable primarily to blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, sheet, strip, plate, tubing, and extrusions used in fabricating parts subject to magnetic particle inspection, but may be used for qualification of a heat melt, or lot of steel.
Standard

Steel Cleanliness, Aircraft Quality, Martensitic Corrosion-Resistant Steels, Magnetic Particle Inspection Procedure

1978-10-01
HISTORICAL
AMS2303A
This specification covers steel cleanliness requirements for aircraft-quality ferro-magnetic, hardenable corrosion-resistant steels by magnetic particle inspection methods. Applicable primarily to blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, sheet, strip, plate, tubing, and extrusions used in fabricating parts subject to magnetic particle inspection, but may be used for qualification of a heat melt, or lot of steel.
Standard

Steel Cleanliness, Aircraft Quality, Martensitic Corrosion-Resistant Steels, Magnetic Particle Inspection Procedure

1967-11-01
HISTORICAL
AMS2303
This specification covers steel cleanliness requirements for aircraft-quality ferro-magnetic, hardenable corrosion-resistant steels by magnetic particle inspection methods. Applicable primarily to blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, sheet, strip, plate, tubing, and extrusions used in fabricating parts subject to magnetic particle inspection, but may be used for qualification of a heat melt, or lot of steel.
Standard

Steel Cleanliness, Aircraft Quality Steel Martensitic Corrosion-Resistant Steels Magnetic Particle Inspection Procedure Metric (Si) Measurement

2003-03-12
HISTORICAL
MAM2303D
This specification covers steel cleanliness requirements in SI (Metric) units for aircraft-quality, ferromagnetic, hardenable corrosion-resistant steels as determined by magnetic particle inspection methods. This specification contains sampling, specimen preparation, and inspection procedures and cleanliness rating criteria. AMS 2303 is the inch/pound version of this MAM. This procuedure has been used typically for the cleanliness evaluation of blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, sheet, strip, plate, tubing, and extrusions used in fabricating parts subject to magnetic particle inspection, but may be used for qualification of a heat, melt, or lot of steel.
Standard

Steel Cleanliness, Aircraft Quality Steel Martensitic Corrosion-Resistant Steels Magnetic Particle Inspection Procedure Metric (Si) Measurement

2001-10-01
HISTORICAL
MAM2303C
This specification covers steel cleanliness requirements in SI (Metric) units for aircraft-quality, ferromagnetic, hardenable corrosion-resistant steels as determined by magnetic particle inspection methods. This specification contains sampling, specimen preparation, and inspection procedures and cleanliness rating criteria. AMS 2303 is the inch/pound version of this MAM. This procuedure has been used typically for the cleanliness evaluation of blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, sheet, strip, plate, tubing, and extrusions used in fabricating parts subject to magnetic particle inspection, but may be used for qualification of a heat, melt, or lot of steel.
X