Search Results

Standard

Eddy Current Inspection of Circular Holes in Nonferrous Metallic Aircraft Engine Hardware

2019-10-14

CURRENT

AS4787A

This SAE Aerospace Standard (AS) establishes minimum requirements for eddy current inspection of circular holes in nonferrous, metallic, low conductivity (less than 5% IACS) aircraft engine hardware with fasteners removed. The inspection is intended to be performed at maintenance and overhaul facilities on engine run hardware.

Standard

Eddy Current Inspection of Circular Holes in Nonferrous Metallic Aircraft Engine Hardware

2013-06-11

HISTORICAL

AS4787

This SAE Aerospace Standard (AS) establishes minimum requirements for eddy current inspection of circular holes in nonferrous, metallic, aircraft engine hardware with fasteners removed. The inspection is intended to be performed at maintenance and overhaul facilities on engine run hardware.

Standard

Exposure Levels of UV Radiation in Nondestructive Inspection Processes

2019-08-05

CURRENT

AIR4964

Long wave ultraviolet or UV-A radiation (between 320 to 400 nm) is used for fluorescent inspections in magnetic particle and liquid penetrant examinations. The UV-A radiation is obtained from either fluorescent or high intensity discharge lamps that are stationary or portable. The commercially available UV-A lamps possess a large variation in intensity output that can cause a legitimate concern for possible health hazard. This draft reviews the nature of UV-A radiation emitted by these lights, blacklight equipment, acceptable UV dosage limits adopted by the American Conference of Governmental Industrial Hygienists (ACGIH) and the European Standards Committee for Nondestructive Testing, and recommendation of proper practices when working with UV-A radiation.

Standard

FLUORESCENT PENETRANT INSPECTION Aircraft and Engine Component Maintenance

1995-11-01

HISTORICAL

AMS2647A

This specification details requirements and procedures for the detection of defects in aircraft and engine components during maintenance and overhaul operations.

Standard

Fluorescent Penetrant Inspection Aircraft and Engine Component Maintenance

1999-10-01

HISTORICAL

AMS2647B

This specification details requirements and procedures for the detection of defects in aircraft and engine components during maintenance and overhaul operations.

Standard

INSPECTION MATERIAL, PENETRANT

1996-08-01

HISTORICAL

AMS2644

This specification establishes the classification, technical requirements, tests, and test procedures for the qualification, approval, and quality verification of all materials used in the liquid penetrant methods of inspection with the exception of those excluded in the application section.

Standard

Inspection Material, Penetrant

2013-10-17

HISTORICAL

AMS2644F

This specification establishes the classification, technical requirements, tests, and test procedures for the qualification, approval, and quality verification of all materials used in the liquid penetrant methods of inspection with the exception of those excluded in the application section.

Standard

Inspection Material, Penetrant

2019-04-08

HISTORICAL

AMS2644G

This specification establishes the classification, technical requirements, tests, and test procedures for the qualification, approval, and quality verification of all materials used in the liquid penetrant methods of inspection with the exception of those excluded in the application section.

Standard

Inspection Material, Penetrant

2020-07-14

CURRENT

AMS2644H

This specification establishes the classification, technical requirements, tests, and test procedures for the qualification, approval, and quality verification of all materials used in the liquid penetrant methods of inspection with the exception of those excluded in the application section.

Standard

Inspection Material, Penetrant

2021-04-30

WIP

AMS2644J

This specification establishes the classification, technical requirements, tests, and test procedures for the qualification, approval, and quality verification of all materials used in the liquid penetrant methods of inspection with the exception of those excluded in the application section.

Standard

Inspection Material, Penetrant

2001-08-01

HISTORICAL

AMS2644B

This specification establishes the classification, technical requirements, tests, and test procedures for the qualification, approval, and quality verification of all materials used in the liquid penetrant methods of inspection with the exception of those excluded in the application section.

Standard

Inspection Material, Penetrant

2002-05-29

HISTORICAL

AMS2644C

This specification establishes the classification, technical requirements, tests, and test procedures for the qualification, approval, and quality verification of all materials used in the liquid penetrant methods of inspection with the exception of those excluded in the application section.

Standard

Inspection Material, Penetrant

2006-10-30

HISTORICAL

AMS2644E

This specification establishes the classification, technical requirements, tests, and test procedures for the qualification, approval, and quality verification of all materials used in the liquid penetrant methods of inspection with the exception of those excluded in the application section.

Standard

Inspection Material, Penetrant

2000-05-01

HISTORICAL

AMS2644A

This specification establishes the classification, technical requirements, tests, and test procedures for the qualification, approval, and quality verification of all materials used in the liquid penetrant methods of inspection with the exception of those excluded in the application section.

Standard

Inspection Process, Magnetic Rubber

2009-07-10

HISTORICAL

AMSI83387A

This specification covers both the material and the examination process of an inspection material in the form of a dispersion of magnetic particles in a controlled viscosity rubber base that cures at room temperature by addition of one or more curing agents. The test object is magnetized with the uncured rubber covering the area of interest. The magnetic particles then migrate to the leakage field caused by the discontinuity. As the rubber cures, discontinuity indications remain in place on the rubber. The product may be supplied in a variety of viscosities and colors.

Standard

Inspection Process, Magnetic Rubber

2016-01-06

CURRENT

AMSI83387B

This specification covers both the material and the examination process of an inspection material in the form of a dispersion of magnetic particles in a controlled viscosity rubber base that cures at room temperature by addition of one or more curing agents. The test object is magnetized with the uncured rubber covering the area of interest. The magnetic particles then migrate to the leakage field caused by the discontinuity. As the rubber cures, discontinuity indications remain in place on the rubber. The product may be supplied in a variety of viscosities and colors.

Standard

MAGNETIC PARTICLE INSPECTION MATERIAL Dry Method

1974-03-01

HISTORICAL

AMS3040

This specification covers magnetic particles having black, red, or other color, as ordered, supplied in the form of dry, packaged powders.

Standard

MAGNETIC PARTICLES Wet Method, Dry Powder

1984-10-01

HISTORICAL

AMS3042A

This specification covers magnetic particles in the form of dry powders and, when specified, including the oil or vehicle to be used of the type and in the proportions required.

Standard

MAGNETIC PARTICLES Wet Method, Dry Powder

1974-03-01

HISTORICAL

AMS3042

This specification covers magnetic particles having black, red, or other color, as ordered, supplied in the form of dry powders and, when specified, the oil or vehicle to be used, of the type and in the proportions required.

Standard

MAGNETIC PARTICLES Wet Method, Oil Vehicle

1974-03-01

HISTORICAL

AMS3041

This specification covers magnetic particles having black, red, or other color, as ordered, supplied in the form of a mixed, ready-to-use suspension in an odorless inspection oil vehicle.