Refine Your Search

Topic

Search Results

Standard

Ultrasonic Thickness Testing

2001-03-01
CURRENT
ARP2654
To provide general instructions for accomplishing ultrasonic thickness measurements. Measurements can be made from one side of a material when access to the opposite side is restricted.
Standard

Ultrasonic Inspection, Titanium and Titanium Alloy Bar and Billet

1972-11-15
HISTORICAL
AMS2631
This specification covers the procedure for ultrasonic inspection of wrought titanium and titanium alloy products 0.50 inch (12.7 mm) and over in cross-sectional thickness. This procedure has been used typically for locating internal defects, such as cracks, voids, spongy areas, and other structural discontinuities, which may or may not be exposed to the surface, but usage is not limited to such applications. Testing normally will be by longitudinal wave procedure, but shear wave procedure may be used when agreed upon by purchaser and vendor.
Standard

Ultrasonic Inspection, Centrifugally-Cast, Corrosion-Resistant Steel Tubular Cylinders

1995-04-01
HISTORICAL
AMS2633B
This procedure covers ultrasonic inspection of tubular, centrifugally-cast, corrosion-resistant steel cylinders. This procedure has been used typically for locating defects such as cracks, voids, spongy areas, and other discontinuities, but usage is not limited to such applications. This procedure is not applicable to austenitic steels where grain boundaries mask results. Immersion inspection is applicable to tubular products whose wall thickness is 0.5 to 9.0 inches (13 to 229mm). Contact inspection is applicable to tubular product whose wall thickness is 3.0 to 9.0 inches (76 to 229 mm).
Standard

Ultrasonic Inspection Thin Wall Metal Tubing

1996-11-01
CURRENT
AMS2634B
This specification covers procedures for ultrasonic inspection of thin wall metal tubing of titanium, titanium alloy, and corrosion and heat resistant steels and alloys having nominal OD over 0.1875 inch (4.762 mm) with OD to wall thickness ratio of 8 or greater and wall thickness variation not exceeding ±10% of nominal.
Standard

Ultrasonic Immersion Inspection Titanium and Titanium Alloy Forgings Premium Grade

2016-11-29
CURRENT
AMS2636A
This specification covers procedures for ultrasonic immersion inspection of premium grade wrought titanium and titanium alloy forgings. Premium grade is a term used to describe titanium alloys used for critical rotating components in turbine engines. For details, see SAE AMS2380, the specification that covers the procedures for approval of products of premium-quality titanium alloys and the controls to be exercised in producing such products.
Standard

Ultrasonic Immersion Inspection Titanium and Titanium Alloy Forgings Premium Grade

2012-09-24
HISTORICAL
AMS2636
This specification covers procedures for ultrasonic immersion inspection of premium grade wrought titanium and titanium alloy forgings. Premium grade is a term used to describe titanium alloys used for critical rotating components in turbine engines. For details, see SAE AMS2380, the specification that covers the procedures for approval of products of premium-quality titanium alloys and the controls to be exercised in producing such products.
Standard

ULTRASONIC INSPECTION Thin Wall Metal Tubing

1991-10-01
HISTORICAL
AMS2634
This specification covers procedures for ultrasonic inspection of thin wall metal tubing of titanium, titanium alloy, and corrosion and heat resistant steels and alloys having nominal OD over 0.1875 in. (4.762 mm) with OD to wall thickness ratio of 8 or greater and wall thickness variation not exceeding ±10% of nominal.
Standard

ULTRASONIC INSPECTION Thin Wall Metal Tubing

1995-02-01
HISTORICAL
AMS2634A
This specification covers procedures for ultrasonic inspection of thin wall metal tubing of titanium, titanium alloy, and corrosion and heat resistant steels and alloys having nominal OD over 0.1875 inch (4.762 mm) with OD to wall thickness ratio of 8 or greater and wall thickness variation not exceeding ±10% of nominal.
Standard

ULTRASONIC INSPECTION Product Over 0.5 In. (12.5 mm) Thick

1980-04-15
HISTORICAL
AMS2630A
This specification covers procedures for ultrasonic inspection of flat, rectangular, round, cylindrical, and contoured products having a thickness or cross-sectional dimension greater than 0.5 in. (12.5 mm) by pulse-echo procedure, using either contact or immersion methods, and using the longitudinal-wave or shear-wave modes or combinations of the two, as necessary. This specification may apply to testing finished machined parts provided the parts can meet the basic testability requirements, such as size, contour, metallurgical structure, and thickness.
Standard

ULTRASONIC INSPECTION OF THIN MATERIALS 0.5 Inch (13 mm) and Thinner

1991-10-01
HISTORICAL
AMS2632
This specification covers the procedure for ultrasonic inspection of flat, contoured, and cylindrical products having a cross sectional thickness of 0.02 - 0.5 in. (0.5 - 13 mm). This specification does not apply to inspection of composite materials.
X