Search Results

Standard

Validation Test Plan for the Digital Time Division Command/Response Multiplex Data Bus Remote Terminals

2017-08-10

CURRENT

AS4111A

This SAE Aerospace Standard (AS) contains a sample test plan for AS15531 or MIL-STD-1553B Remote Terminals (RT) that may serve several different purposes. This document is intended to be contractually binding when specifically called out in a specification, Statement of Work (SOW), or when required by a Data Item Description (DID). Any and all contractor changes, alterations, or testing deviations to this section shall be separately listed for easy review.

Standard

Validation Test Plan for the Digital Time Division Command/Response Multiplex Data Bus Remote Terminals

2011-11-15

HISTORICAL

AS4111

This SAE Aerospace Standard (AS) contains a sample test plan for AS15531 or MIL-STD-1553B Remote Terminals (RT) that may serve several different purposes. This document is intended to be contractually binding when specifically called out in a specification, Statement of Work (SOW), or when required by a Data Item Description (DID). Any and all contractor changes, alterations, or testing deviations to this section shall be separately listed for easy review.

Standard

Validation Test Plan for the Digital Time Division Command/Response Multiplex Data Bus Bus Controllers

2017-08-18

CURRENT

AS4113A

This test plan is broken into three major sections for the testing of bus controllers Electrical, Protocol and Noise tests.

Standard

Validation Test Plan for AS4074 Linear Token Passing Multiplex Data Bus

2002-01-06

HISTORICAL

AS4290

This test plan defines the test requirements for determining that Bus Interface Units (BIUs) meet the requirements of SAE AS4074, Linear Token Passing Multiplex Data Bus.

Standard

Validation Test Plan for AS4074 Linear Token Passing Multiplex Data Bus

2012-05-03

CURRENT

AS4290A

This test plan defines the test requirements for determining that Bus Interface Units (BIUs) meet the requirements of SAE AS4074, Linear Token Passing Multiplex Data Bus.

Standard

VALIDATION TEST PLAN FOR THE DIGITAL TIME DIVISION COMMAND/RESPONSE MULTIPLEX DATA BUS BUS CONTROLLERS

2011-11-15

HISTORICAL

AS4113

This test plan is broken into three major sections for the testing of bus controllers Electrical, Protocol and Noise tests.

Standard

Type F-2 Fiber Optic Media Interface Characteristics

2011-11-15

HISTORICAL

AS4074/2A

This slash sheet specifies the operational parameters and characteristics of a particular implementation of the SAE Linear, Token Passing Bus (LTPB) Interface Unit. This slash sheet defines the following: a The physical media interface: This slash sheet specifies the characteristics of the optical interface to the physical bus media. b The minimum and maximum timing requirements for operation of this implementation of the LTPB. c The data coding used to encode and decode the data for transmission. d The default values to be loaded into the timers of the LTPB interface at power-up prior to intervention by the host processor.

Standard

Type F-2 Fiber Optic Media Interface Characteristics

2016-10-21

CURRENT

AS4074/2B

This slash sheet specifies the operational parameters and characteristics of a particular implementation of the SAE Linear, Token Passing Bus (LTPB) Interface Unit. This slash sheet defines the following: a The physical media interface: This slash sheet specifies the characteristics of the optical interface to the physical bus media. b The minimum and maximum timing requirements for operation of this implementation of the LTPB. c The data coding used to encode and decode the data for transmission. d The default values to be loaded into the timers of the LTPB interface at power-up prior to intervention by the host processor.

Standard

Type F-2 Fiber Optic Media Interface Characteristics

2001-10-01

HISTORICAL

AS4074/2

This slash sheet specifies the operational parameters and characteristics of a particular implementation of the SAE Linear, Token Passing Bus (LTPB) Interface Unit. This slash sheet defines the following: a The physical media interface: This slash sheet specifies the characteristics of the optical interface to the physical bus media. b The minimum and maximum timing requirements for operation of this implementation of the LTPB. c The data coding used to encode and decode the data for transmission. d The default values to be loaded into the timers of the LTPB interface at power-up prior to intervention by the host processor.

Standard

Type F-1 Fiber Optic Media Interface Characteristics

2016-10-21

CURRENT

AS4074/1B

This slash sheet specifies the operational parameters and characteristics of a particular implementation of the SAE Linear, Token Passing Bus (LTPB) Interface Unit. This slash sheet defines the following: a The physical media interface: This slash sheet specifies the characteristics of the optical interface to the physical bus media. b The minimum and maximum timing requirements for operation of this implementation of the LTPB. c The data coding used to encode and decode the data for transmission. d The default values to be loaded into the timers of the LTPB interface at power-up prior to intervention by the host processor.

Standard

Type F-1 Fiber Optic Media Interface Characteristics

2001-10-01

HISTORICAL

AS4074/1

This slash sheet specifies the operational parameters and characteristics of a particular implementation of the SAE Linear, Token Passing Bus (LTPB) Interface Unit. This slash sheet defines the following: a The physical media interface: This slash sheet specifies the characteristics of the optical interface to the physical bus media. b The minimum and maximum timing requirements for operation of this implementation of the LTPB. c The data coding used to encode and decode the data for transmission. d The default values to be loaded into the timers of the LTPB interface at power-up prior to intervention by the host processor.

Standard

Type F-1 Fiber Optic Media Interface Characteristics

2011-11-15

HISTORICAL

AS4074/1A

This slash sheet specifies the operational parameters and characteristics of a particular implementation of the SAE Linear, Token Passing Bus (LTPB) Interface Unit. This slash sheet defines the following: a The physical media interface: This slash sheet specifies the characteristics of the optical interface to the physical bus media. b The minimum and maximum timing requirements for operation of this implementation of the LTPB. c The data coding used to encode and decode the data for transmission. d The default values to be loaded into the timers of the LTPB interface at power-up prior to intervention by the host processor.

Standard

Type E-1 Electrical Media Interface Characteristics

2016-10-21

CURRENT

AS4074/3B

This slash sheet specifies the operational parameters and characteristics of a particular implementation of the SAE Linear, Token Passing Bus (LTPB) Interface Unit. This slash sheet defines the following: a The physical media interface: This slash sheet specifies the characteristics of the electrical interface to the physical bus media. b The minimum and maximum timing requirements for operation of this implementation of the LTPB. c The data coding used to encode and decode the data for transmission. d The default values to be loaded into the timers of the LTPB interface at power-up prior to intervention by the host processor.

Standard

Type E-1 Electrical Media Interface Characteristics

2001-10-01

HISTORICAL

AS4074/3

This slash sheet specifies the operational parameters and characteristics of a particular implementation of the SAE Linear, Token Passing Bus (LTPB) Interface Unit. This slash sheet defines the following: a The physical media interface: This slash sheet specifies the characteristics of the electrical interface to the physical bus media. b The minimum and maximum timing requirements for operation of this implementation of the LTPB. c The data coding used to encode and decode the data for transmission. d The default values to be loaded into the timers of the LTPB interface at power-up prior to intervention by the host processor.

Standard

Test Plan/Procedure for AS5643/1 S400 Copper Media Interface Characteristics Over Extended Distances

2021-04-14

CURRENT

AS5706A

This document establishes test plans/procedures for the AS5643/1 Slash Sheet. The AS5643/1 Slash Sheet establishes guidelines for the use of IEEE Std 1394-2008 as a data bus network in military and aerospace vehicles. It encompasses the data bus cable and its interface electronics for a system utilizing S400β over copper medium over extended lengths.

Standard

Test Plan/Procedure for AS5643/1 S400 Copper Media Interface Characteristics Over Extended Distances

2007-05-01

HISTORICAL

AS5706

This document establishes test plans/procedures for the AS5643/1 Slash Sheet. The AS5643/1 Slash Sheet establishes guidelines for the use of IEEE-1394b as a data bus network in military and aerospace vehicles. It encompasses the data bus cable and its interface electronics for a system utilizing S400 over copper medium over extended lengths.

Standard

Test Plan/Procedure for AS5643 IEEE-1394b Interface Requirements for Military and Aerospace Vehicle Applications

2013-04-29

CURRENT

AS5657

This document establishes test plans/procedures for the AS5643 Standard that by itself defines guidelines for the use of IEEE-1394b as a data bus network in military and aerospace vehicles. This test specification defines procedures and criteria for testing device compliance with the AS5643 Standard.

Standard

Test Plan/Procedure for AS5643 IEEE-1394b Interface Requirements for Military and Aerospace Vehicle Applications

2013-10-22

WIP

AS5657A

This document establishes test plans/procedures for the AS5643 Standard that by itself defines guidelines for the use of IEEE-1394b as a data bus network in military and aerospace vehicles. This test specification defines procedures and criteria for testing device compliance with the AS5643 Standard.

Standard

Test Plan for the Digital Time Division Command/Response Multiplex Data Bus System

2017-08-15

CURRENT

AS4115A

This test plan consists of two major sections for testing of MIL-STD-1553B data bus systems: Bus Network and System Integration Tests.

Standard

Test Plan for the Digital Time Division Command/Response Multiplex Data Bus Bus Monitors

2011-11-15

HISTORICAL

AS4116

This Aerospace Standard (AS) defines the test requirements for determining that bus monitors meet the requirements of MIL-STD-1553B, Digital Time Division Command/Response Multiplex Data Bus.