Refine Your Search

Date

Date

Topic

Topic

Data management Pistons Pressure Power and Propulsion Automatic Transmission and Transaxle Committee

Search Results

Viewing 1 to 20 of 101
123Next >Last >>
Sort by title
Standard

TRANSMISSIONS—SCHEMATIC DIAGRAMS
1995-06-01
HISTORICAL
J647_199506
The following schematic diagrams exemplify the SAE recommended method of illustrating automotive transmission arrangements. They were developed to standardize industry practice and facilitate a clear understanding of the functional interrelations of the gearing, clutches, hydrodynamic drive unit, and other transmission components. Two variations of diagrams are used: Transmission in neutral and in gear. For illustrative purposes, some typical transmissions are shown.
Standard

TRANSMISSIONS—SCHEMATIC DIAGRAMS
1997-07-01
HISTORICAL
J647_199707
The following schematic diagrams exemplify the SAE recommended method of illustrating automotive transmission arrangements. They were developed to standardize industry practice and facilitate a clear understanding of the functional interrelations of the gearing, clutches, hydrodynamic drive unit, and other transmission components. Two variations of diagrams are used: transmission in neutral and in gear. For illustrative purposes, some typical transmissions are shown.
Standard

TRANSMISSIONS - SCHEMATIC DIAGRAMS
1990-04-01
HISTORICAL
J647_199004
The following schematic diagrams exemplify the SAE recommended method of illustrating automotive transmission arrangements. They were developed to standardize industry practice and facilitate a clear understanding of the functional interrelations of the gearing, clutches, hydrodynamic drive unit, and other transmission components. Two variations of diagrams are used: Transmission in neutral and in gear. For illustrative purposes, some typical transmissions are shown.
Standard

Symbols for Hydrodynamic Drives
2011-07-08
CURRENT
J640_201107
The following system of symbols is recommended for use in technical papers and engineering reports dealing with hydrodynamic drives.
Standard

Symbols for Hydrodynamic Drives
2000-03-10
HISTORICAL
J640_200003
The following system of symbols is recommended for use in technical papers and engineering reports dealing with hydrodynamic drives.
Standard

SYMBOLS FOR HYDRODYNAMIC DRIVES
1988-06-01
HISTORICAL
J640_198806
The following system of symbols is recommended for use in technical papers and engineering reports dealing with hydrodynamic drives.
Standard

SAE No.2 Friction Test Machine 6000 r/min Stepped Power Test
2013-03-11
HISTORICAL
J2488_201303
This SAE Recommended Practice is intended as the definition of a standard test, but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. The SAE No. 2 Friction Test Machine is used to evaluate the friction characteristics of automatic transmission plate clutches with automotive transmission fluids. It can also be used to conduct durability tests on wet friction systems. The specific purpose of this document is to define a 6000 r/min Stepped Power Test for the evaluation of wet friction system performance variation as a function of power level. This procedure uses an initial engagement speed of 6000 r/min and is intended as a standard procedure for common use by both suppliers and end users.
Standard

SAE No. 2 Friction Test Machine μPVT Test
2019-05-31
CURRENT
J2490_201905
This SAE Recommended Practice is intended as the definition of a standard test, which may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. The SAE No. 2 Friction Test Machine is used to evaluate the friction characteristics of automatic transmission plate clutches with automotive transmission fluids. It can also be used to conduct durability tests on wet friction systems. The specific purpose of this document is to define a μPVT Test for the evaluation of the variation of wet friction system performance as a function of speed, temperature, and pressure. This procedure is intended as a standard for both suppliers and end users. The only variables selected by the supplier or user of the friction system are: a Friction material b Fluid c Reaction plates These three variables must be clearly identified when reporting the results of this test.
Standard

SAE No. 2 Friction Test Machine µPVT Test
2023-12-05
WIP
J2490
This SAE Recommended Practice is intended as the definition of a standard test, which may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use.The SAE No. 2 Friction Test Machine is used to evaluate the friction characteristics of automatic transmission plate clutches with automotive transmission fluids. It can also be used to conduct durability tests on wet friction systems.The specific purpose of this document is to define a µPVT Test for the evaluation of the variation of wet friction system performance as a function of speed, temperature, and pressure. This procedure is intended as a standard for both suppliers and end users.The only variables selected by the supplier or user of the friction system are:a. Friction materialb. Fluidc. Reaction platesThese three variables must be clearly identified when reporting the results of this test.
Standard

SAE No. 2 Friction Test Machine µPVT Test
2012-08-06
HISTORICAL
J2490_201208
This SAE Recommended Practice is intended as the definition of a standard test, which may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. The SAE No. 2 Friction Test Machine is used to evaluate the friction characteristics of automatic transmission plate clutches with automotive transmission fluids. It can also be used to conduct durability tests on wet friction systems. The specific purpose of this document is to define a µPVT Test for the evaluation of the variation of wet friction system performance as a function of speed, temperature, and pressure. This procedure is intended as a standard for both suppliers and end users. The only variables selected by the supplier or user of the friction system are: a Friction Material b Fluid c Reaction Plates These three variables must be clearly identified when reporting the results of this test.
Standard

SAE No. 2 Friction Test Machine Durability Test
2012-03-19
CURRENT
J2489_201203
This SAE Recommended Practice is intended as the definition of a standard test, but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. The SAE No 2 Friction Test Machine is used to evaluate the friction characteristics of automatic transmission plate clutches with automotive transmission fluids. It can also be used to conduct durability tests on wet friction systems. The specific purpose of this document is to define a Durability Test based on a specific power level selected from either the 3600 r/min Stepped Power Test or from the 6000 r/min Stepped Power Test, for the evaluation of wet friction system performance variation as a function of number of cycles. This standard procedure is intended for common use by both suppliers and end users to allow objective comparisons of wet friction material system performance.
Standard

SAE No. 2 Friction Test Machine 6000 rpm Stepped Power Test
2019-07-24
CURRENT
J2488_201907
This SAE Recommended Practice is intended as the definition of a standard test, but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. The SAE No. 2 Friction Test Machine is used to evaluate the friction characteristics of automatic transmission plate clutches with automotive transmission fluids. It can also be used to conduct durability tests on wet friction systems. The specific purpose of this document is to define a 6000 rpm stepped power test for the evaluation of wet friction system performance variation as a function of power level. This procedure uses an initial engagement speed of 6000 rpm and is intended as a standard procedure for common use by both suppliers and end users.
Standard

SAE No. 2 Friction Test Machine 3600 rpm Stepped Power Test
2019-05-23
CURRENT
J2487_201905
This SAE Recommended Practice is intended as the definition of a standard test, but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. The SAE No. 2 Friction Test Machine is used to evaluate the friction characteristics of automatic transmission plate clutches with automotive transmission fluids. It can also be used to conduct durability tests on wet friction systems. The specific purpose of this document is to define a 3600 rpm Stepped Power Test for the evaluation of wet friction system performance variation as a function of power level. This procedure uses an initial engagement speed of 3600 rpm and is intended as a standard procedure for common use by both suppliers and end users.
Standard

SAE No. 2 Friction Test Machine 3600 r/min Stepped Power Test
2012-05-31
HISTORICAL
J2487_201205
This SAE Recommended Practice is intended as the definition of a standard test, but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. The SAE No. 2 Friction Test Machine is used to evaluate the friction characteristics of automatic transmission plate clutches with automotive transmission fluids. It can also be used to conduct durability tests on wet friction systems. The specific purpose of this document is to define a 3600 r/min Stepped Power Test for the evaluation of wet friction system performance variation as a function of power level. This procedure uses an initial engagement speed of 3600 r/min and is intended as a standard procedure for common use by both suppliers and end users.
Standard

SAE No. 2 Clutch Friction Test Machine Guidelines
2012-03-19
CURRENT
J286_201203
This SAE Recommended Practice is intended as a guide toward implementation of a standard practice but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. The SAE No. 2 Friction Test Machine is used to evaluate the friction characteristics of automatic transmission plate clutch with automotive transmission fluids. It can also be used to conduct durability tests on wet friction systems. This document is intended for common use by both suppliers and end users to define minimum test machine requirements to allow objective comparisons of wet friction material system performance.
Standard

SAE Band Friction Test Machine Guidelines
2012-03-19
CURRENT
J1499_201203
This SAE Recommended Practice is intended as a guide toward implementation of a standard practice but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. The SAE band friction test machine is used to evaluate the frictional characteristics of automatic transmission band friction materials with automatic transmission fluids. It can also be used to conduct durability tests on wet friction systems.
Standard

Rectangular Cross Section Polymeric Sealing Rings (Metric)
1999-01-01
HISTORICAL
J2310_199901
The purpose of this SAE Recommended Practice is to establish guidelines for the automatic transmission and hydraulic systems Engineer to design rectangular cross section seals for rotating and static grooved shaft applications. Also included are material property comparisons of polymeric materials suitable for these applications. Material covered in this document is not intended to include aluminum applications.
123Next >Last >>
X