Refine Your Search

Search Results

Standard

Reporting Cleanliness Levels of Hydraulic Fluids

2012-05-29
CURRENT
J1165_201205
This SAE Recommended Practice has been formulated to advance and endorse the use of the ISO (International Organization for standardization) Solid Contaminant Code as the universal means for expressing the level of particulate contaminant in hydraulic fluid and for specifying acceptable limits of cleanliness. Worldwide approval was gained for this coding system because it provides a simple, unmistakable, meaningful, and consistent means of communication between suppliers and users. The code applies to all types of hydraulic (liquid) fluids used in fluid power and control systems as applied to self-propelled machines as referenced in J1116. The purpose of this recommended practice is to provide a practical and uniform method for graphically representing the contamination level of a fluid and assigning its proper ISO cleanliness code.
Standard

Hydraulic Pump and Motor Mounting and Drive Dimensions

1995-11-01
HISTORICAL
J744_199511
This SAE Standard applies to hydraulic pumps and motors used on off-road self-propelled work machines as described in categories 1 through 5 of SAE J1116 JUN86. The purpose of this standard is to provide a progression of standard mounting flanges and shafts that are dimensionally compatible.
Standard

Hydraulic Pump and Motor Mounting and Drive Dimensions

1983-10-01
HISTORICAL
J744_198310
This SAE Standard applies to hydraulic pumps and motors used on off-road self-propelled work machines as described in categories 1 through 5 of SAE J1116 JUN86. The purpose of this standard is to provide a progression of standard mounting flanges and shafts that are dimensionally compatible.
Standard

Hydraulic Pump and Motor Mounting and Drive Dimensions

1988-07-01
HISTORICAL
J744_198807
This SAE Standard applies to hydraulic pumps and motors used on off-road self-propelled work machines as described in categories 1 through 5 of SAE J1116 JUN86. The purpose of this standard is to provide a progression of standard mounting flanges and shafts that are dimensionally compatible.
Standard

Hydraulic Power Pump Test Procedure

1987-04-01
HISTORICAL
J745_198704
This test code describes tests for determining characteristics of hydraulic positive displacement pumps used on construction and industrial machinery as referenced in SAE J1116. These characteristics are to be recorded on data sheets similar to the ones shown herein. Two sets of data sheets are to be submitted: one at 49 degrees C (120 degrees F) and one at 82 degrees C (180 degrees F). This test code establishes conditions for pump tests, outlines a procedure for tests, and establishes a method of presenting pump test data. The procedure covers the following determinations: a) derived capacity; b) delivery characteristics; c) power input; d) power loss; e) overall efficiency; f) pressure compensator response and recovery; g) flow compensator response and recovery.
Standard

Hydraulic Power Pump Test Procedure

1996-09-01
HISTORICAL
J745_199609
This test code describes tests for determining characteristics of hydraulic positive displacement pumps used on construction and industrial machinery as referenced in SAE J 1116. These characteristics are to be recorded on data sheets similar to the ones shown herein. Two sets of data sheets are to be submitted: one at 49 °C (120 °F) and one at 82 °C (180 °F). This test code establishes conditions for pump tests, outlines a procedure for tests, and establishes a method of presenting pump test data. The procedure covers the following determinations: a) derived capacity; b) delivery characteristics; c) power input; d) power loss; e) overall efficiency; f) pressure compensator response and recovery; and g) flow compensator response and recovery.
Standard

Hydraulic Power Pump Test Procedure

2009-06-12
CURRENT
J745_200906
This test code describes tests for determining characteristics of hydraulic positive displacement pumps used on construction and industrial machinery as referenced in SAE J1116. These characteristics are to be recorded on data sheets similar to the ones shown in Figures 1 to 3. Two sets of data sheets are to be submitted: one at 49 °C (120 °F) and one at 82 °C (180 °F).
Standard

Hydraulic Power Pump Test Procedure

1986-03-01
HISTORICAL
J745_198603
This test code describes tests for determining characteristics of hydraulic positive displacement pumps used on construction and industrial machinery as referenced in SAE J1116. These characteristics are to be recorded on data sheets similar to the ones shown herein. Two sets of data sheets are to be submitted: one at 49 degrees C (120 degrees F) and one at 82 degrees C (180 degrees F). This test code establishes conditions for pump tests, outlines a procedure for tests, and establishes a method of presenting pump test data. The procedure covers the following determinations: a) derived capacity; b) delivery characteristics; c) power input; d) power loss; e) overall efficiency; f) pressure compensator response and recovery; g) flow compensator response and recovery.
Standard

Hydraulic Power Pump Test Procedure

2017-03-30
WIP
J745
This test code describes tests for determining characteristics of hydraulic positive displacement pumps used on construction and industrial machinery as referenced in SAE J1116. These characteristics are to be recorded on data sheets similar to the ones shown herein. Two sets of data sheets are to be submitted: one at 49 degrees C (120 degrees F) and one at 82 degrees C (180 degrees F). This test code establishes conditions for pump tests, outlines a procedure for tests, and establishes a method of presenting pump test data. The procedure covers the following determinations: a) derived capacity; b) delivery characteristics; c) power input; d) power loss; e) overall efficiency; f) pressure compensator response and recovery; g) flow compensator response and recovery.
Standard

Hydraulic Fluid Power Circuit Filtration - Application & Methods

2012-08-20
HISTORICAL
J931_201208
This SAE Information Report is primarily to familiarize the designer of hydraulic powered machinery with the necessity for oil filtration in the hydraulic power circuit, the degree of system cleanliness required, types of filtration and filters available and their location and maintenance in the hydraulic circuit.
Standard

Hydraulic Directional Control Valves, 3000 PSI Maximum

2014-10-24
CURRENT
J748_201410
This SAE Recommended Practice has been set up by Subcommittee 4 of the Off-Road Machinery Technical Committee and is primarily for directional control valves on construction and industrial machinery equipment as referenced in SAE J1116. The purpose is to establish port area to flow relationship and match valve spool eye ends in relation to rated capacity. Port connections are optional for either the 4-bolt split flange connection or the internal straight thread "O" ring connection.
Standard

Hydraulic Cylinder Leakage Test

2019-10-01
WIP
J1336
Applies to hydraulic cylinders which are components of Off-Road Self-Propelled Work Machines defined in SAE J1116.
Standard

Hydraulic Cylinder Leakage Test

2014-09-29
CURRENT
J1336_201409
Applies to hydraulic cylinders which are components of Off-Road Self-Propelled Work Machines defined in SAE J1116.
X