Search Results

Standard

Wiring Distribution Systems for Construction, Agricultural, and Off-Road Work Machines

1998-03-01

HISTORICAL

J1614_199803

This SAE Standard specifies requirements and design guidelines for electrical wiring systems of less than 50 V and cable diameters from 0.8 to 19 mm2 used on construction, agricultural, and general purpose industrial categories of off-road self-propelled work machines as defined in SAE J1116.

Standard

Reporting Cleanliness Levels of Hydraulic Fluids

2012-05-29

CURRENT

J1165_201205

This SAE Recommended Practice has been formulated to advance and endorse the use of the ISO (International Organization for standardization) Solid Contaminant Code as the universal means for expressing the level of particulate contaminant in hydraulic fluid and for specifying acceptable limits of cleanliness. Worldwide approval was gained for this coding system because it provides a simple, unmistakable, meaningful, and consistent means of communication between suppliers and users. The code applies to all types of hydraulic (liquid) fluids used in fluid power and control systems as applied to self-propelled machines as referenced in J1116. The purpose of this recommended practice is to provide a practical and uniform method for graphically representing the contamination level of a fluid and assigning its proper ISO cleanliness code.

Standard

Method of Measuring and Reporting the Pressure Differential-Flow Characteristics of a Hydraulic Fluid Power Valve

2019-04-11

CURRENT

J1117_201904

Applies to hydraulic fluid power valves as applied to Off-Road Self-Propelled Work Machines defined in SAE J1116.

Standard

Measuring and Reporting the Internal Leakage of a Hydraulic Fluid Power Valve

2023-01-17

CURRENT

J1235_202301

This procedure applies to directional control valves or other valves which in various positions direct or block fluid flow as applied to Off-Road Self-Propelled Work Machines as referenced in SAE J1116.

Standard

Measuring and Reporting the Internal Leakage of a Hydraulic Fluid Power Valve

2015-09-25

HISTORICAL

J1235_201509

This procedure applies to directional control valves or other valves which in various positions direct or block fluid flow as applied to Off-Road Self-Propelled Work Machines as referenced in SAE J1116.

Standard

MEASURING AND REPORTING THE INTERNAL LEAKAGE OF A HYDRAULIC FLUID POWER VALVE

1978-06-01

HISTORICAL

J1235_197806

Standard

MEASURING AND REPORTING THE INTERNAL LEAKAGE OF A HYDRAULIC FLUID POWER VALVE

1986-03-01

HISTORICAL

J1235_198603

This procedure applies to directional control valves or other valves which in various positions direct or block fluid flow as applied to self-propelled work machines as referenced in SAE J1116.

Standard

Hydraulic Pump and Motor Mounting and Drive Dimensions

2013-02-04

HISTORICAL

J744_201302

This SAE Standard applies to hydraulic pumps and motors used on off-road self-propelled work machines as described in SAE J1116.

Standard

Hydraulic Pump and Motor Mounting and Drive Dimensions

2021-10-08

CURRENT

J744_202110

This SAE Standard applies to hydraulic pumps and motors used on off-road self-propelled work machines as described in SAE J1116.

Standard

Hydraulic Pump and Motor Mounting and Drive Dimensions

2016-10-05

HISTORICAL

J744_201610

This SAE Standard applies to hydraulic pumps and motors used on off-road self-propelled work machines as described in SAE J1116.

Standard

Hydraulic Power Pump Test Procedure

2019-11-20

CURRENT

J745_201911

This test code describes tests for determining characteristics of hydraulic positive displacement pumps used on off-road self-propelled work machines as referenced in SAE J1116.

Standard

Hydraulic Power Pump Test Procedure

2009-06-12

HISTORICAL

J745_200906

This test code describes tests for determining characteristics of hydraulic positive displacement pumps used on construction and industrial machinery as referenced in SAE J1116. These characteristics are to be recorded on data sheets similar to the ones shown in Figures 1 to 3. Two sets of data sheets are to be submitted: one at 49 °C (120 °F) and one at 82 °C (180 °F).

Standard

Hydraulic Power Pump Test Procedure

1996-09-01

HISTORICAL

J745_199609

This test code describes tests for determining characteristics of hydraulic positive displacement pumps used on construction and industrial machinery as referenced in SAE J1116. These characteristics are to be recorded on data sheets similar to the ones shown in Figures 1 to 3. Two sets of data sheets are to be submitted: one at 49 °C (120 °F) and one at 82 °C (180 °F).

Standard

Hydraulic Fluid Power Circuit Filtration - Application and Methods

2019-10-02

CURRENT

J931_201910

This SAE Information Report is primarily to familiarize the designer of hydraulic powered machinery with the necessity for oil filtration in the hydraulic power circuit, the degree of system cleanliness required, types of filtration and filters available, and their location and maintenance in the hydraulic circuit.

Standard

Hydraulic Fluid Power Circuit Filtration - Application & Methods

2012-08-20

HISTORICAL

J931_201208

This SAE Information Report is primarily to familiarize the designer of hydraulic powered machinery with the necessity for oil filtration in the hydraulic power circuit, the degree of system cleanliness required, types of filtration and filters available and their location and maintenance in the hydraulic circuit.

Standard

Hydraulic Directional Control Valves, 3000 psi Maximum

2019-12-04

CURRENT

J748_201912

This SAE Recommended Practice has been set up by Subcommittee 4 of the Off-Road Machinery Technical Committee and is primarily for directional control valves on construction and industrial machinery equipment as referenced in SAE J1116. The purpose is to establish port area to flow relationship and match valve spool eye ends in relation to rated capacity. Port connections are optional for either the 4-bolt split flange connection or the internal straight thread "O" ring connection.

Standard

Hydraulic Directional Control Valves, 3000 PSI Maximum

2014-10-24

HISTORICAL

J748_201410

This SAE Recommended Practice has been set up by Subcommittee 4 of the Off-Road Machinery Technical Committee and is primarily for directional control valves on construction and industrial machinery equipment as referenced in SAE J1116. The purpose is to establish port area to flow relationship and match valve spool eye ends in relation to rated capacity. Port connections are optional for either the 4-bolt split flange connection or the internal straight thread "O" ring connection.

Standard

Hydraulic Cylinder Rod Seal Endurance Test Procedure

2014-09-29

HISTORICAL

J1374_201409

Applies to hydraulic seals used to seal the rods of hydraulic cylinders which are components of Off-Road Self-Propelled Work Machines defined in SAE J1116.

Standard

Hydraulic Cylinder Rod Seal Endurance Test Procedure

2020-09-09

CURRENT

J1374_202009

Applies to hydraulic seals used to seal the rods of hydraulic cylinders which are components of off-road self-propelled work machines defined in SAE J1116.

Standard

Hydraulic Cylinder Leakage Test

2021-10-12

CURRENT

J1336_202110

Applies to hydraulic cylinders which are components of off-road self-propelled work machines defined in SAE J1116.