Refine Your Search

Date

Date

Manufacturing processes Alloys Fasteners Committee Connecting rods Production control

Search Results

Viewing 1 to 20 of 84
123Next >Last >>
Sort by title
Standard

Blind Rivets - Break Mandrel Type
2013-04-15
HISTORICAL
J1200_201304
This SAE Standard establishes the dimensional, mechanical, and performance requirements of inch and metric break mandrel blind rivets suitable for use in joining the component parts of an assembly.
Standard

Blind Rivets—Break Mandrel Type
1998-05-01
HISTORICAL
J1200_199805
This SAE Standard establishes the dimensional, mechanical, and performance requirements of inch and metric break mandrel blind rivets suitable for use in joining the component parts of an assembly.
Standard

DECARBURIZATION IN HARDENED AND TEMPERED METRIC THREADED FASTENERS
1997-04-01
HISTORICAL
J121M_199704
This SAE Recommended Practice covers methods for measuring, classifying, and specifying decarburization in the threaded section of hardened and tempered steel bolts, screws, studs, and similar parts. It is not intended to cover products which are specifically carburized to achieve special properties.
Standard

DECARBURIZATION IN HARDENED AND TEMPERED THREADED FASTENERS
1976-07-01
HISTORICAL
J121A_197607
This recommended practice covers methods for measuring, classifying, and specifying decarburization in the threaded section of hardened and tempered steel bolts, screws, studs, and similar parts. It is not intended to cover products which are specifically carburized to achieve special properties.
Standard

DECARBURIZATION IN HARDENED AND TEMPERED UNIFIED THREADED FASTENERS
1997-04-01
HISTORICAL
J121_199704
This SAE Recommended Practice covers methods for measuring, classifying, and specifying decarburization in the threaded section of hardened and tempered steel bolts, screws, studs, and similar parts. It is not intended to cover products which are specifically carburized to achieve special properties.
Standard

DRYSEAL PIPE THREADS
1961-06-01
HISTORICAL
J476A_196106
The Dryseal American Standard Taper Pipe Thread, the Dryseal American Fuel Internal Straight Pipe Thread and the Dryseal American Intermediate Internal Straight Pipe Thread covered by this standard conform with the American Standard ASA-B2.2. The Dryseal SAE-Short Taper Pipe Thread in this standard conforms with the Dryseal American Standard Taper Pipe Thread except for the length of thread, which is shortened for increased clearance and economy of material. The significant feature of the Dryseal thread is controlled truncation at the crest and root to assure metal to metal contact coincident with or prior to flank contact. Contact at the crest and root prevents spiral leakage and insures pressure-tight joints without the use of a lubricant or sealer. Lubricants, if not functionally objectionable, may be used to minimize the possibility of galling in assembly.
Standard

Decarburization in Hardened and Tempered Unified Threaded Fasteners
2013-01-02
CURRENT
J121_201301
This SAE Recommended Practice covers methods for measuring, classifying, and specifying decarburization in the threaded section of hardened and tempered steel bolts, screws, studs, and similar parts. It is not intended to cover products which are specifically carburized to achieve special properties.
Standard

Dryseal Pipe Threads
2013-02-01
CURRENT
J476_201302
The Dryseal American Standard Taper Pipe Thread, the Dryseal American Fuel Internal Straight Pipe Thread and the Dryseal American Intermediate Internal Straight Pipe Thread covered by this standard conform with the American Standard ASA-B2.2. The Dryseal SAE-Short Taper Pipe Thread in this standard conforms with the Dryseal American Standard Taper Pipe Thread except for the length of thread, which is shortened for increased clearance and economy of material. The significant feature of the Dryseal thread is controlled truncation at the crest and root to assure metal to metal contact coincident with or prior to flank contact. Contact at the crest and root prevents spiral leakage and insures pressure-tight joints without the use of a lubricant or sealer. Lubricants, if not functionally objectionable, may be used to minimize the possibility of galling in assembly.
Standard

Guide for Rivet Selection and Design Consideration
2013-04-16
HISTORICAL
J492_201304
This is a guide intended to aid the user in the proper selection and application of rivets as a fastening means. It consists of general information on the advantages of riveting, various methods of riveting, selection of rivets and design considerations.
Standard

Guide for Rivet Selection and Design Consideration
2005-06-30
HISTORICAL
J492_200506
This is a guide intended to aid the user in the proper selection and application of rivets as a fastening means. It consists of general information on the advantages of riveting, various methods of riveting, selection of rivets and design considerations.
Standard

Guide for Rivet Selection and Design Consideration
2016-11-23
CURRENT
J492_201611
This is a guide intended to aid the user in the proper selection and application of rivets as a fastening means. It consists of general information on the advantages of riveting, various methods of riveting, selection of rivets and design considerations.
Standard

LOCK WASHERS
1974-02-01
HISTORICAL
J489B_197402
This SAE Standard covers the complete dimensional and general specifications, including physical properties and methods of testing, for those types of lock washers intended for use in automotive and general industrial applications.
Standard

MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS
1977-07-01
HISTORICAL
J429J_197707
This SAE Standard covers the mechanical and material requirements for steel bolts, screws, studs, sems1, and U-bolts2 used in automotive and related industries in sizes to 1½ in., inclusive. NOTE: Previous issues of this standard also covered nuts, now covered separately in SAE J995.
Standard

MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS
1979-05-01
HISTORICAL
J429K_197905
This SAE Standard covers the mechanical and material requirements for steel bolts, screws, studs, sems,1 and U-bolts2 used in automotive and related industries in sizes to 1½ in, inclusive. Note: Previous issues of this standard also covered nuts, now covered separately in SAE J995 (August, 1967).
Standard

MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS
1983-08-01
HISTORICAL
J429_198308
This SAE Standard covers the mechanical and material requirements for steel bolts, screws, studs, sems,1 and U-bolts2 used in automotive and related industries in sizes to 1¾ in, inclusive. Note: Previous issues of this standard also covered nuts, now covered separately in SAE J995 (August, 1967).
Standard

MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS
1977-07-01
HISTORICAL
J429I_197707
This SAE Standard covers the mechanical and material requirements for steel bolts, screws, studs, sems1, and U-bolts2 used in automotive and related industries in sizes to 1½ in., inclusive. NOTE: Previous issues of this standard also covered nuts, now covered separately in SAE J995.
123Next >Last >>
X