Refine Your Search

Topic

Search Results

Standard

V-Couplings, Application of

1992-07-01
HISTORICAL
AIR869A
This SAE Aerospace Information Report is intended to inform users of the proper use, application, and installation of V-couplings. V-couplings will perform only if they are properly installed. This document informs the user of the correct manner of applying and installing V-couplings and also cautions against improper use.
Standard

Test Methods, Hose Assemblies, Polytetrafluoroethylene (PTFE)

2008-02-14
CURRENT
AS2078A
This SAE Aerospace Standard (AS) describes the test methods for flexible PTFE hose and hose assemblies used in aircraft fluid systems in the pressure and temperature ranges defined in specific procurement specifications. It applies to the hose and the hose coupling. The tests and assembly requirements for the connecting end fitting are covered in the procurement specification. This document applies each time that it is referred to in a procurement specification or other definition document.
Standard

Test Methods for Tube-Fitting Assemblies, Metric (ISO 10583)

1995-12-01
CURRENT
MA2094
This SAE Aerospace Standard (AS) specifies test methods for fitting assemblies used in aircraft fluid systems in the pressure classes B, D, and E, and in temperature Types I, II, and III of MA 2001. This document applies each time that it is referred to in a procurement specification or other definition document. Fluids and materials used for the tests are listed in Section 2.
Standard

Test Methods for Tube-Fitting Assemblies

1995-12-01
HISTORICAL
AS2094
This SAE Aerospace Standard (AS) specifies test methods for fitting assemblies used in aircraft fluid systems in the pressure classes B, D, and E (1500 psi, 3000 psi, and 4000 psi), and in temperature Types I, II, and III (-65 to 160 °F, -65 to 275 °F, and -65 to 400 °F) of AS2001. This document applies each time that it is referred to in a procurement specification or other definition document. Fluids and materials used for the tests are listed in Section 2.
Standard

Test Methods for Tube-Fitting Assemblies

2011-10-18
HISTORICAL
AS2094A
This SAE Aerospace Standard (AS) specifies test methods for tube-fitting assemblies used in aircraft fluid systems in the following pressure classes: B (1500 psi or 10500 kPa), D (3000 psi or 21000 kPa), E (4000 psi or 28000 kPa), and J (5000 psi or 35000 kPa) and in temperature types I (-65 to 160 °F or -55 to 70 °C), II (-65 to 275 °F or -55 to 135 °C), and III (-65 to 400 °F or -55 to 200 °C) of AS2001. This document applies each time that it is referred to in a procurement specification or other definition document. Fluids and materials used for the tests are listed in Section 2.
Standard

Test Methods for Tube-Fitting Assemblies

2018-07-12
CURRENT
AS2094B
This SAE Aerospace Standard (AS) specifies test methods for tube-fitting assemblies used in aircraft fluid systems in the following pressure classes: B (1500 psi or 10500 kPa), D (3000 psi or 21000 kPa), E (4000 psi or 28000 kPa), and J (5000 psi or 35000 kPa) and in temperature types I (-65 to 160 °F or -55 to 70 °C), II (-65 to 275 °F or -55 to 135 °C), and III (-65 to 400 °F or -55 to 200 °C) of AS2001. This document applies each time that it is referred to in a procurement specification or other definition document. Fluids and materials used for the tests are listed in Section 2.
Standard

Standard Impulse Machine Equipment and Operation

2009-01-07
CURRENT
AIR1228A
This SAE Aerospace Information Report (AIR) establishes the specifications and descriptions of the critical components and operational guidelines for the standard hydraulic impulse machine for testing hydraulic hose assemblies, tubing, coils, fittings and similar fluid system components. This revision to the AIR1228 provides a description of a system that meets the requirements for specifications including: AS603, AS4265, and ARP1383. This impulse system utilizes closed loop servo control with specifically generated command signal waveforms. Data accuracy and integrity are emphasized in this revision. Knowing the uncertainty of the pressure measurement is important whether using a resonator tube system, as described in the original release of this document, or a closed-loop systems as described in this release. The accuracy of the data measurement system and consistency of the pressure waveform are fundamental to test validity, regardless of the system type.
Standard

References, Spacecraft and Spacecraft Servicing, Fluid System Components (Abbreviations, Acronyms, Definitions, Applicable Documents and Environmental Conditions)

1993-06-09
CURRENT
AIR4728
This SAE Aerospace Information Report (AIR) presents reference information for use in preparing detailed specifications and other documents. The intent is to have a master reference document containing frequently required tabulations of information, such as the meaning of abbreviations, the spelled out wording of acronyms, the definition of terms, etc. so that such tabulations need not be repeated in recommended practice documents describing how to prepare technical documents. This document is intended to provide references in the field of fluid system components for space applications. Space applications include spacecraft, such as satellites, space stations, launch vehicles and space shuttles, and servicing equipment and components used for ground systems and launching and for servicing in space. Fluid system components include couplings, fittings, hose and tubing assemblies.
Standard

Hose Assemblies, Metal, Medium Pressure, High Temperature

2006-09-11
HISTORICAL
AS1424F
This SAE Aerospace Standard (AS) covers medium-pressure, high-temperature, flexible, metal-hose assemblies suitable for operation in pneumatic systems up to 800 °F with excursion to 1200 °F for Class “B” and “N” and primarily for use on jet aircraft power plants. Refer to 1.2.1 for recommended usage.
Standard

Hose Assemblies, Metal, Medium Pressure, High Temperature

2007-12-03
CURRENT
AS1424G
This SAE Aerospace Standard (AS) covers medium-pressure, high-temperature, flexible, metal-hose assemblies suitable for operation in pneumatic systems up to 800 °F with excursion to 1200 °F for Class “B” and “N” and primarily for use on jet aircraft power plants. Refer to 1.2.1 for recommended usage.
Standard

Hose Assemblies, Metal, Medium Pressure, High Temperature

2003-02-10
HISTORICAL
AS1424E
This SAE Aerospace Standard (AS) covers medium-pressure, high-temperature, flexible, metal-hose assemblies suitable for continuous operation in pneumatic systems up to 850 °F with short duration excursion to 1200 °F and primarily for use on jet aircraft power plants.
X