Search Results

Plug-in Hybrid Electric Vehicles (PHEVs) are one of the main technology options for reducing vehicle CO2 emissions and helping vehicle manufacturers (OEMs) to meet the CO2 targets set by different Governments from all around the world. In Europe OEMs have introduced a number of PHEV models to meet their CO2 target of 95 g/km for passenger cars set for the year 2021. Fuel consumption (FC) and CO2 emissions from PHEVs, however, strongly depend on the way they are used and on the frequency with which their battery is charged by the user. Studies have indeed revealed that in real life, with poor charging behavior from users, PHEV FC is equivalent to that of conventional vehicles, and in some cases higher, due to the increased mass and the need to keep the battery at a certain charging level.

Following its commitment to reduce CO2 emissions from road transport in Europe, the European Commission has launched the development of a new methodology for monitoring CO2 emissions from heavy-duty vehicles (HDV). Due to the diversity and particular characteristics of the HDV sector it was decided that the core of the proposed methodology will be based on a combination of component testing and vehicle simulation. A detailed methodology for the measurement of each individual vehicle component of relevance and a corresponding vehicle simulation is being elaborated in close collaboration with the European HDV manufacturers, component suppliers and other stakeholders. Similar approaches have been already adopted in other major HDV markets such as the US, Japan and China. In order to lay the foundations for the future HDV CO2 monitoring and certification software application, a new vehicle simulation software was developed, Vehicle Energy Consumption calculation Tool (henceforward VECTO).

Exhaust emissions were measured under real world urban driving conditions using a set of in-vehicle FTIR emission measurement system, which is able to measure 65 emission components simultaneously at a rate of 0.5 Hz. The test vehicle was a EURO 2 emission compliant SI car equipped with real time fuel consumption measurement and temperature measurement along the exhaust pipe across the catalyst allowing the matching of thermal characteristics to emission profiles and monitor fuel consumption. The temperature profile indicated that the light-off of the catalyst took about 150∼200 seconds. The warm up of the lubricating oil and coolant water required a longer time than the catalyst did. The impact of ambient temperatures on lubricating oil and coolant water warm ups was greater than that on the light-off of the catalyst. The heat loss and energy balance were calculated during the whole cycle period. The influence of cold start on fuel consumption was investigated.

The purpose of this study is to investigate the effects on the engine's efficiency and exhaust gas emissions by the use of ethanol/gasoline blends in conventional technology vehicles. The fuels E0, E10, E20 and E50 were tested in a 1300cc old technology vehicle without a catalytic converter. The measurements of the engine's brake torque, revolutions and fuel consumption were accomplished on a chassis dynamometer for different engine loads and with different gear ratios. Regarding the exhaust gas emissions, the concentrations of CO2 , CO, HC and NOx were recorded. The results have shown that increasing the ethanol percentage in the blend has decreased the CO and HC emissions but increased the NOx emissions. For fuels E10 and E20 an increase on the engine's brake torque and power along with a decrease in fuel consumption were observed. For E50, both brake torque and power were reduced. The CO2 emissions were increased as the ethanol concentration increased.

Exhaust emissions were measured under real world urban driving conditions using a set of in-vehicle FTIR emission measurement system, which is able to measure 65 emission components simultaneously at a rate of 0.5 Hz. The test vehicle was a modern EURO4 emission compliant SI car equipped with temperature measurement along the exhaust pipe across the catalyst so as to match thermal characteristics to emission profiles. A free flow urban driving cycle was used for the test and four repeated journeys were conducted. The results were compared to EU emissions legislation. The results show that the warm up of the lubricating oil needed 15 minutes. The TWC needed about 200 seconds to reach full conversion efficiency. CO, THC and NOx emissions exceeded the EURO4 exhaust emission legislation. CO2 emissions were well above the type approval value of this vehicle.

This paper describes and analyzes the results of investigations of application of heavy alcohols as an ingredient of diesel fuel. Three different mi xtures of butanol (as heavy alcohol), rape oil (as vegetable oil) and conventional diesel fuel (this mixture was called the biomixdiesel-BMD) were tested using a Perkins engine on a test bed. Contrary to existing experiences both the maximum power output and the maximum torque of the engine were higher in the whole range of the speed of the engine crankshaft when the engine biomixdiesel (BMD) was reinforced. The addition of the component biomix to fuel influenced the specific fuel consumption. Generally, with the larger part of the biomix components the specific fuel consumption were higher. Also the engine power was higher and one should expect that in exploitation the specific fuel consumption should not increase. It is very important that this fuel could be used to reinforce old, already existing and the future diesel engines.

The influence of the ignition timing on the exhaust emissions of an old technology vehicle fuelled by various ethanol/petrol mixtures was investigated. All tests were carried out on a 1300cc Ford Escort equipped with a carburettor and without a catalytic converter. The reference petrol fuel E0 and the blends E10, E20 and E50 were used, at three different constant speeds of 30, 50 and 90 km/h, under full load with wide open throttle while the vehicle was on a chassis dynamometer. All measurements were taken at three different settings of the advance angle, at 0°, 4° and 12° BTDC. With the use of an exhaust gas analyser, the concentrations of CO, CO2, HC, O2 and NOX in the exhaust gases at the tailpipe were recorded. For the evaluation of the results the lambda value was calculated from the available recorded data. Changing the ignition timing, while using the blends E10, E20 and E50, had the same effects on the emissions as the reference fuel E0.

The transport sector is one of the major contributors to greenhouse gas emissions. This study investigated three greenhouse gases emitted from road transport using a probe vehicle: CO₂, N₂O and CH₄ emissions as a function of cold start and ambient temperatures. A real-world driving cycle has been developed at Leeds and referred as LU-BS, which has an urban free flow driving pattern. The test vehicle was driven on the same route by the same driver on different days with different ambient temperatures. All the journeys were started from cold. An in-vehicle FTIR emission measurement system was installed on a EURO2 emission compliance SI car for emissions measurement at a rate of 0.5 Hz. This emission measurement system was calibrated on a standard CVS measurement system and showed an excellent agreement on the CO₂ measurement with the CVS results. The N₂O and CH₄ were calibrated by calibration gas bottles.

The transport sector is one of the major contributors to greenhouse gas emissions. This study investigated three greenhouse gases emitted from road transport: CO2, N2O and CH4 emissions as a function of engine warm up and driving cycles. Five different urban driving cycles were developed and used including free flow driving and congested driving. An in-vehicle FTIR (Fourier Transform Inferred) emission measurement system was installed on a EURO2 emission compliant SI (Spark Ignition) car for emissions measurement at a rate of 0.5 HZ under real world urban driving conditions. This emission measurement system was calibrated on a standard CVS (Constant Volume Sampling) measurement system and showed excellent agreement on CO2 measurement with CVS results. The N2O and CH4 measurement was calibrated using calibration gas in lab. A MAX710 real time in-vehicle fuel consumption measurement system was installed in the test vehicle and real time fuel consumption was then obtained.

Fatty Acid Methyl Ester (FAME) products derived from vegetable oils and animal fats are now widely used in European diesel fuels and their use will increase in order to meet mandated targets for the use of renewable products in road fuels. As more FAME enters the diesel pool, understanding the impact of higher FAME levels on the performance and emissions of modern light-duty diesel vehicles is increasingly important. Of special significance to Well-to-Wheels (WTW) calculations is the potential impact that higher FAME levels may have on the vehicle's volumetric fuel consumption. The primary objective of this study was to generate statistically robust fuel consumption data on three light-duty diesel vehicles complying with Euro 4 emissions regulations. These vehicles were evaluated on a chassis dynamometer using four fuels: a hydrocarbon-only diesel fuel and three FAME/diesel fuel blends containing up to 50% v/v FAME. One FAME type, a Rapeseed Methyl Ester (RME), was used throughout.

The scope of this work was to study the impact of the ignition timing on the engine’s performance on an old technology vehicle fuelled by ethanol/petrol blends. Many previous studies have been published on the subject, but most of them were carried on SI engines using bench dynamometers. In this work, a 1.3 L Ford Escort equipped with a carburettor and without a catalytic converter was tested on a chassis dynamometer. Blends with ethanol concentrations of 10%, 20% and 50% per volume were used and the results were compared with the reference LRP fuel. All tests were performed at three different constant speeds of 30, 50 and 90 km/h, under full load with wide open throttle. Torque and rpm of the engine were recorded by the chassis dynamometer’s software. The fuel consumption was measured by means of the gravimetric method. All measurements were taken at three different settings of the advance angle, at 0°, 4° and 12° BTDC.

Vegetable oils blended with diesel fuel are recognised as biofuels by the European legislation and their application is an interesting option for increasing the market share of biofuels. This paper presents results from a detailed study conducted on a Euro 3 compliant diesel passenger car and a high injection pressure test bench engine using 10% Cottonseed oil- 90% Diesel blends as fuel. The tests included fuel consumption and emissions measurements. Aim of the experimental analysis was to accurately evaluate the effect of biofuel application on a common rail engine. The measurement protocol included measurements of regulated emissions, fuel consumption and in-cylinder pressure at various operation modes. Results from the bench engine measurements are in line with those retrieved from the vehicle and indicate that the fuel tested presents good characteristics and that under certain conditions it can be applied as automotive fuel in a broader scale.

Reducing fuel consumption and emissions from road transport is a key factor for tackling global warming, promoting energy security and sustaining a clean environment. Several technical measures have been proposed in this aspect amongst which the application of low viscosity engine lubricants. Low viscosity lubricants are considered to be an interesting option for reducing fuel consumption (and CO2 emissions) throughout the fleet in a relatively cost effective way. However limited data are available regarding their actual “real-world” performance with respect to CO2 and other pollutant emissions. This study attempts to address the issue and to provide experimental data regarding the benefit of low viscosity lubricants on fuel consumption and CO2 emissions over both the type-approval and more realistic driving cycles.

In European Union (EU), new heavy-duty vehicles are simulated with the Vehicle Energy Consumption calculation TOol (VECTO) to certify their fuel consumption and CO2 emissions. VECTO will also be used to certify vehicles with hybrid-electric powertrains in all topological configurations from P0 to P4 parallel systems and series hybrids. A development version of VECTO able to simulate these configurations is already available and was used for this study. The study team collected measurement data from a specific P2 hybrid lorry, instrumented with wheel torque sensors, current and voltage sensors, fuel flow sensor and a PEMS device. The vehicle was tested on the chassis dyno and on the road, and a representative model was created in VECTO. The regional delivery certification cycle was simulated in VECTO in charge sustaining and full electric mode.

Waste heat recovery based on an Organic Rankine Cycle is a technology proposed for the reduction of the fuel consumption of heavy-duty vehicles. This technology is currently not simulated by VECTO, the tool used in Europe to certify the fuel consumption and CO2 emissions of new heavy-duty vehicles. In this work, a class 5 lorry equipped with a prototype Organic Rankine Cycle system is tested on the chassis dyno during steady state and transient driving cycles, with the waste heat recovery enabled and disabled. The waste heat recovery system enabled a brake specific fuel consumption reduction of 3.1% over the World Harmonized Vehicle Cycle, 2.5% during the official EU Regional Delivery Cycle, and up to 6.5% at certain engine operating points during the fuel consumption mapping cycle. A model of the vehicle was created in VECTO based on the experimental data. The fuel consumption map of the engine with and without the Organic Rankine Cycle was derived from the steady-state experiments.

Gas-operated vehicles powered by natural gas (NG) or other gaseous fuels such as liquefied petroleum gas (LPG), are seen as a possible option for curbing CO₂ emissions, fuel consumption and operating costs of goods and passenger transport. Initiatives have been adopted by various public organizations in Europe and abroad in order to introduce gas-fueled vehicles in their fleets or use retrofit fueling systems in existing ones. In this study a retrofit dual fuel (diesel-gas) fuelling system was investigated as a potential candidate technology for city bus fleets. The system is marketed under the commercial name d-gid. It is a platform developed by the company Ecomotive Solutions for the control and management of a diesel engine fuelled with a mixture of gaseous fuels. In order to assess its environmental and cost effectiveness the system was tested on a Volvo city bus. The tests were performed on an HDV chassis dyno under various driving conditions.

Today most of the European member states offer diesel fuel which contains fatty acid methylesters (biodiesel) at a range between 0.5 to 5% vol. In order to meet longer term objectives, the mixing ratio is expected to rise up to 10% vol. in the years to come. The question therefore arises, how current engine technologies, which were not originally designed to operate on biodiesel blends, perform at this relatively high mixing ratio. A number of experiments were therefore performed over several steady-state operation modes, using a 10% vol. biodiesel blend (palm oil feedstock) on a light-duty common-rail Euro 3 engine. The experiments included measurement of the in-cylinder pressure during combustion, regulated pollutants emissions and fuel consumption. The analysis showed that the blends tested present good fuel characteristics. Combustion effects were limited but changes in the start of ignition and heat release rate could still be identified.

Heavy-duty vehicles (HDVs) account for some 5% of the EU’s total greenhouse gas emissions. They present a variety of possible configurations that are deployed depending on the intended use. This variety makes the quantification of their CO2 emissions and fuel consumption difficult. For this reason, the European Commission has adopted a simulation-based approach for the certification of CO2 emissions and fuel consumption of HDVs in Europe; the VECTO simulation software has been developed as the official tool for the purpose. The current study investigates the impact of various technologies on the CO2 emissions of European trucks through vehicle simulations performed in VECTO. The chosen vehicles represent average 2015 vehicles and comprised of two rigid trucks (Class 2 and 4) and a tractor-trailer (Class 5), which were simulated under their reference configurations and official driving cycles.

This study investigates the impact of low concentration biodiesel blends on the regulated and polycyclic aromatic hydrocarbon (PAH) emissions from a modern passenger vehicle. The vehicle was Euro 4 compliant fitted with a direct injection common-rail diesel engine and a diesel oxidation catalyst. Emission and fuel consumption measurements were performed on a chassis dynamometer using constant volume sampling (CVS) technique, following the European regulations. All measurements were conducted over the type approval New European Driving Cycle (NEDC) and the real-traffic-based Artemis driving cycles. Aiming to evaluate the fuel impact on emissions, a soy-based, a palm-based, and a rapeseed oil-based biodiesel were blended with an ultra-low sulfur diesel at proportions of 10, 20, and 30% by volume. The experimental results revealed that emissions of PM, HC and CO decreased with biodiesel over most driving conditions.

The paper describes the development of a modelling approach to simulate the effect of the new Worldwide harmonized Light duty Test Procedure (WLTP) on the certified CO2 emissions of light duty vehicles. The European fleet has been divided into a number of segments based on specific vehicle characteristics and technologies. Representative vehicles for each segment were selected. A test protocol has been developed in order to generate the necessary data for the validation of the vehicle simulation models. In order to minimize the sources of uncertainty and the effects of flexibilities, a reference “template model” was developed to be used in the study. Subsequently, vehicle models were developed using AVL Cruise simulation software based on the above mentioned template model. The various components and sub-modules of the models, as well as their input parameters, have been defined with the support of the respective OEMs.