Search Results

The general objective of the whole-Body Response (WBR) research program was to generate data on the kinematics and response of human surrogates in a realistic automobile impact environment. The program used a test configuration consisting of an idealized hard seat representation of a car seat with a three-point harness restraint system. Three different severity levels of crash test conditions were used. The human surrogates tested in this program were fifteen male cadavers*, a Hybrid II (Part 572) Anthropomorphic Test Device and a Hybrid III ATD recently developed by General Motors. In addition, mathematical simulations of the response and kinematics of a 50th percentile male occupant were performed at the three levels of crash severity, using the MVMA Two-Dimensional Crash Victim Simulator.

Measurement of chest compression is vital to properly assessing injury risk for restraint systems. It directly relates chest loading to the risk of serious or fatal compression injury for the vital organs protected by the rib cage. Other measures of loading such as spinal acceleration or total restraint load do not separate how much of the force is applied to the rib cage, shoulders, or lumbar and cervical spines. Hybrid III chest compression is biofidelic for blunt impact of the sternum, but is “stiff” for belt loading. In this study, an analysis was conducted of two published crash reconstruction studies involving belted occupants. This provides a basis for comparing occupant injury risks with Hybrid III chest compression in similar exposures. Results from both data sources were similar and indicate that belt loading resulting in 40 mm Hybrid III chest compression represents a 20-25% risk of an AIS≥3 thoracic injury.

A test series using unembalmed cadavers was conducted to investigate thoracic response differences in lateral impacts between high energy (rib fractures produced) and low energy (no rib fractures produced) testing and also the response to low energy impacts for different impact directions (frontal, 45°, and lateral). Five of the test subjects were instrumented with a nine-accelerometer package and an eighteen-accelerometer array to measure thoracic response. Seven of the test subjects were instrumented with a triaxial accelerometer on the head and a six-accelerometer array to measure thoracic response. Impact events were performed with either the UMTRI pendulum impact device or the UMTRI pneumatic impact device. The subject was struck with a free-traveling mass (25 or 56 kg) which was fitted with either a 15 cm round or 20 cm square rigid metal surface.

Over the last decade large safety improvements have been made in crash protection for stock car racing drivers. It has been well established that in side and rear impacts the driver seat provides the primary source for occupant retention and restraint. With the implementation of NASCAR®'s (National Association for Stock Car Auto Racing, Inc) newest generation of stock car, the Car of Tomorrow (COT), into the racing schedule, the opportunity to develop and implement a universal stock car driver seat performance specification was accomplished. This paper describes the development of the Seat Performance Specification including the goals of the specification, the methodology used to develop it, a census of the existing driver seat population used in on-track competition, review of developmental dynamic specification sled tests and quasi-static tests as well as summation of the Seat Performance Specification requirements.

At the 2002 MSEC, we presented a paper on the sled test evaluation of racecar head/neck restraint performance (Melvin, et al. 2002). Some individuals objected to the 3 msec clip filtering procedures used to eliminate artifactual spikes in the neck tension data for the HANS® device. As a result, we are presenting the same test data with the spikes left in the neck force data to reassure those individuals that these spikes did not significantly affect the results and conclusions of our original paper. In addition we will add new insights into understanding head/neck restraint performance gained during two more years of testing such systems. This paper re-evaluates the performance of three commercially available head/neck restraint systems using a stock car seating configuration and a realistic stock car crash pulse. The tests were conducted at an impact angle of 30 degrees to the right, with a midsize male Hybrid III anthropomorphic test device (ATD) modified for racecar crash testing.

Recent action by some racecar sanctioning bodies making head/neck restraint use mandatory for competitors has resulted in a number of methods attempting to provide head/neck restraint. This paper evaluates the performance of a number of commercially available head/neck restraint systems using a stock car seating configuration and a realistic stock car crash pulse. The tests were conducted at an impact angle of 30 degrees to the right, with a midsize male Hybrid III anthropomorphic test device (ATD) modified for racecar crash testing. A six-point latch and link racing harness restrained the ATD. The goal of the tests was to examine the performance of the head/neck restraint without the influence of the seat or steering wheel. Three head/neck restraint systems were tested using a sled pulse with a 35 mph (56 km/h) velocity change and 50G peak deceleration. Three tests with three samples of each system were performed to assess repeatability.

The technical and scientific literature dealing with thoracic injury, to or within the rib cage, from blunt loading is reviewed. The history of the development of associated Federal Motor Vehicle Safety Standards is reviewed from the aspect of its relationship to the history of development of the research information. Field case data from car-to-car and car-to-tree/pole crashes has been examined and summarized. This study suggests that the laboratory research has not adequately covered the principal variables found to exist in actual injury cases. Specifically, more research attention should be given to the shape of the impactor, to the loading location and direction, and to injuries in the contusion and/or laceration family. Correspondingly, the accident investigation process needs to be more sensitive to occupant/vehicle-interior interaction variables so that laboratory research can be properly guided.

This paper presents the results of a series of over 30 impact sled simulations of racing car frontal crashes conducted as part of the GM Motorsports Safety Technology Research Program. A Hyge™ impact sled fitted with a simulated racing car seat and restraint system was used to simulate realistic crash loading with a mid-size male Hybrid III dummy. The results of tests, in the form of measured loads, displacements, and accelerations, are presented and comparisons made with respect to the levels of these parameters seen in typical passenger car crash testing and to current injury threshold values.

Detailed investigations of automobile crashes in which children under 10 years old were passengers were carried out. The purpose of this study was to investigate the injury patterns of restrained and unrestrained children and to assess the performance of child restraint systems in real world crashes. Crashes which occurred mainly in Washtenaw and Oakland counties of the state of Michigan were surveyed. A total of 348 vehicle crashes involving 494 children less than 10 years old were identified. Forty eight crashes involving 63 children were selected for in-depth investigation. 37% of the children in the investigated cases were restrained by an adult lap belt or a child restraint. It was found that only 4.7% of the children in the overall sample were restrained. Both adult seat belts and child restraints (when used) were found to be effective in reducing injuries in crashes. Head and facial injuries were found to be the most common form of injury to children.

This paper is a brief review of the complex subject of human injury mechanisms and impact tolerance. Automotive accident-related injury patterns are briefly described and the status of knowledge in the biomechanics of trauma of the head, neck, chest, abdomen and extremities is discussed.

Injury and disability associated with head (brain), neck (spinal cord) and facial injury account for 61.7% of the total societal Harm in the most recent estimate of motor-vehicle related crash injuries. This paper discusses the need for accurate information on translational and rotational acceleration of the head as the first step in critiquing the Head Injury Criterion (HIC) and other injury predictive methods, and developing a fuller understanding of brain and spinal cord injury mechanisms. A measurement system has been developed using linear accelerometers to accurately determine the 3D translational and rotational acceleration of the Hybrid III dummy head. Our concept has been to use the conventional triaxial accelerometer in the dummy's head to assess translational acceleration, and three rows of in-line linear accelerometers and a least squares analysis to compute statistical best-fits for the rotational acceleration about three orthogonal axes.

This paper describes the initial phases of an on-going project in the GM Motorsports Safety Technology Research Program to investigate Indy car crashes using an on-board impact recorder as the primary data collection tool. The development of a database consisting of crash investigation data patterned after national highway crash databases is discussed. The data gathered and coded includes track and incident scene information, vehicle damage, and driver injuries, as well as the vehicle decelerations measured by the impact recorder. The paper discusses the development of specifications for the impact device, the selection of the specific recorder and its implementation on a routine basis in Indy car racing. The results from incidents that produced significant data during the 1993, 1994 and 1995 racing seasons are summarized.

Data on towaway accidents involving 1973- and 1974-model American passenger cars were collected according to a systematic sampling plan in order to measure 1974 restraint system performance. The data on 5,138 drivers and right front passengers were collected by three organizations: Calspan Corporation, Highway Safety Research Institute, and Southwest Research Institute. Analysis of the data showed that the 1974 ignition interlock system increased full restraint system usage by a factor of 10 over 1973 cars. The 1974 full restraint system (lap and upper-torso belts) also demonstrated a greater reduction in severe injuries (AIS≥2) than the 1973 lap-belt-only system. Paradoxically, little reduction in 1974-model severe injuries was found when the two model years were compared, although no attempt was made to control for confounding factors in the accident cases.

The purpose of this paper is to establish injury assessment reference values specific to the CRABI 6-Month infant dummy for use in evaluating the interaction of rear-facing infant restraints with a deploying passenger airbag. The available literature on the biomechanics of child injury and mechanical response and the results of impact tests with various child and infant dummies are reviewed and summarized. Estimations of the injury assessment reference values for use with the CRABI 6-Month dummy are made using scaling techniques based on the principles of dimensional analysis and dummy test data from infant restraint tests under conditions where injuries are not likely to occur. The information developed in this report will allow the assessment of injury potential in tests of the interaction of passenger airbags with rear-facing infant restraints. This issue is of particular importance to vehicles with only front seats, such as pickup trucks and sport vehicles.

Throughout the first decade of the twenty first century, large improvements in occupant safety have been made in NASCAR®'s (National Association for Stock Car Auto Racing, Inc) race series. Enhancements to the occupant restraint system include the development and implementation of head and neck restraints, minimum performance requirements for belts and seats and the introduction of energy absorbing foam are a few highlights, among others. This paper discusses nineteen sled tests used to analyze hypothesized improvements to restraint system mounting geometry. The testing matrix included three sled acceleration profiles, three impact orientations, two Anthropomorphic Test Device (ATD) sizes as well as the restraint system design variables.

This paper describes the development of an improved neck simulation that can be adapted to current anthropometric dummies. The primary goal of the neck design is to provide a reasonable simulation of human motion during impact while maintaining a simple, rugged structure. A synthesis of the current literature on cervical spine mechanics was incorporated with the results of x-ray studies of cervical spine mobility in human volunteers and with the analysis of head-neck motions in human volunteer sled tests to provide a background for the design and evaluation of neck models. Development tests on neck simulations were carried out using a small impact sled. Tests on the final prototype simulation were also performed with a dummy on a large impact sled. Both accelerometers and high-speed movies were used for performance evaluation.

A series of 16 sled impact tests was conducted at the Highway Safety Research Institute sled facility to evaluate the effectiveness of restraint devices and systems currently being used to transport school-bus and wheelchair-seated handicapped children. A sled impact pulse of 20 m.p.h. and 16 G's was used for all tests. Eight tests involved wheelchairs in forward-facing and side-facing orientations for head-on and 33-degree oblique impacts. Another eight tests involved forward-facing bus seats for head-on and 33-degree oblique impacts. The results generally point out the ineffectiveness of many currently used devices and systems for protecting the child in a bus collision. In six of the eight bus seat tests the dummy's head struck the back of the bus seat in front. This was primarily because of a lack of upper-torso restraint.

This paper presents the results of direct impact tests and driving point impedance tests on the legs of seated unembalmed human cadavers. Variables studied in the program included impactor energy and impact direction (axial and oblique). Multiple strain gage rosettes were applied to the bone to determine the strain distribution in the bone. The test results indicate that the unembalmed skeletal system of the lower extremities is capable of carrying significantly greater loads than those determined in tests with embalmed subjects (the only similar data reported in the present literature). The strain analysis indicated that significant bending moments are generated in the femur with axial knee impact. The results of the impedance tests are used to characterize the load transmission behavior of the knee-femur-pelvis complex, and the impact test results are combined with this information to produce suggested response characteristics for dummy simulation of knee impact response.

Multiple axial knee impacts and/or a single lateral pelvis impact were performed on a total of 19 cadavers. The impacting surface was padded with various materials to produce different force-time and load distribution characteristics. Impact load and skeletal acceleration data are presented as functions of both time and frequency in the form of mechanical impedance. Injury descriptions based on gross autopsy are given. The kinematic response of the pelvis during and after impact is presented to indicate the similarities and differences in response of the pelvis for various load levels. While the impact response data cannot prescribe a specific tolerance level for the pelvis, they do indicate variables which must be considered and some potential problems in developing an accurate injury criterion.

Two-dimensional film analysis was conducted to study the kinematics of the head and neck of 17 restrained human volunteers in 24 frontal impacts for acceleration levels from 6g to 15g. The trajectory of the head center of gravity relative to upper torso reference points and the rotation of head and neck relative to the lower torso during the forward motion phase were of particular interest. The purpose of the study was to analyze the head-neck kinematics in the mid-sagittal plane for a variety of human volunteer frontal sled tests from different laboratories using a common analysis method for all tests, and to define a common response corridor for the trajectory of the head center-of-gravity from those tests.