Search Results

To define a test procedure that when conducted will provide a repeatable measure of a vehicle's maximum acceleration performance.

To define a test procedure that when conducted will provide a repeatable measure of a vehicle's maximum acceleration performance. This SAE Recommended Practice provides a standardized means of measuring acceleration performance of passenger cars and light-duty trucks.

To define a test procedure that will provide a repeatable measure of a vehicle's launch response and maximum accelleration performance.

To define significant driving situations involving acceleration, establish meaningful measures of such accelerations, and develop test procedures that will measure a vehicle’s maximum performance capabilities during those driving situations.

To define a test procedure that when conducted will provide a repeatable measure of a vehicle's maximum acceleration performance.

To define a test procedure that when conducted will provide a repeatable measure of a vehicle's maximum acceleration performance.

This procedure covers measurement of vehicle road load on a dry, straight, level road at speeds less than 113 km/h (70 mi/h).

This procedure covers measurement of vehicle road load on a dry, straight, level road at speeds less than 113 km/h (70 mi/h).

This SAE Recommended Practice establishes uniform chassis dynamometer test procedures for hybrid-electric vehicles (HEVs) and plug-in hybrid-electric vehicles (PHEVs) designed for public roads. This recommended practice provides instructions for measuring and calculating the exhaust emissions and fuel economy of such vehicles over the following standard test cycles: the Urban Dynamometer Driving Schedule (UDDS), the Highway Fuel Economy Driving Schedule (HFEDS), the US06 Driving Schedule (US06), the SC03 Driving Schedule (SC03), and the cold-start Federal Test Procedure (cold FTP), which is based on the UDDS. However, the procedures are structured so that other driving schedules may be substituted, provided that the corresponding preparatory procedures, test lengths, and weighting factors are modified accordingly. This document does not specify which emissions constituents to measure (e.g., HC, CO, NOx, CO2); instead, that decision will depend on the objectives of the tester.

This Society of Automotive Engineers (SAE) Recommended Practice establishes uniform chassis dynamometer test procedures for hybrid-electric vehicles (HEVs) that are designed to be driven on public roads. The procedure provides instructions for measuring and calculating the exhaust emissions and fuel economy of HEVs driven on the Urban Dynamometer Driving Schedule (UDDS) and the Highway Fuel Economy Driving Schedule (HFEDS), as well as the exhaust emissions of HEVs driven on the US06 Driving Schedule (US06) and the SC03 Driving Schedule (SC03). However, the procedures are structured so that other driving schedules may be substituted, provided that the corresponding preparatory procedures, test lengths, and weighting factors are modified accordingly. Furthermore, this document does not specify which emissions constituents to measure (e.g., HC, CO, NOx, CO2); instead, that decision will depend on the objectives of the tester.

This SAE Recommended Practice establishes uniform chassis dynamometer test procedures for hybrid-electric vehicles (HEVs) that are designed to be driven on public roads. The procedure provides instructions for measuring and calculating the exhaust emissions and fuel economy of HEV's driven on the Urban Dynamometer Driving Schedule (UDDS) and the Highway Fuel Economy Driving Schedule (HFEDS), as well as the exhaust emissions of HEVs driven on the US06 Driving Schedule (US06) and the SC03 Driving Schedule (SC03). However, the procedures are structured so that other driving schedules may be substituted, provided that the corresponding preparatory procedures, test lengths, and weighting factors are modified accordingly. Furthermore, this document does not specify which emissions constituents to measure (e.g., HC, CO, NOx, CO2); instead, that decision will depend on the objectives of the tester.

This procedure is a modification of the urban driving cycles noted in SAE J1082 and which is run on a suitable road or test track. The procedure yields cold start/warm-up fuel economy values indicative of consumer level at the ambient condition of the test. Within referenced limitations, the procedure can be utilized to determine the fuel economy differential among vehicles or between vehicle changes. Purpose This SAE Recommended Practice provides a uniform test procedure for measuring the fuel economy of light-duty vehicles during cold start and warm-up operation (motor vehicles designed primarily for transportation of persons or property and rated at 4500 kg GVW (10 000 lb) or less) on suitable roads.

This SAE Standard incorporates driving cycles that produce fuel consumption data relating to Urban, Suburban, and Interstate driving patterns and is intended to be used to determine the relative fuel economy among vehicles and driving patterns under warmed-up conditions on test tracks, suitable roads, or chassis dynamometers.1

This SAE Standard incorporates driving cycles that produce fuel consumption data relating to Urban, Suburban, and Interstate driving patterns and is intended to be used to determine the relative fuel economy among vehicles and driving patterns under warmed-up conditions on test tracks, suitable roads, or chassis dynamometers.1 The urban driving cycle forms the basis of a Cold-Start Test Procedure described in SAE J1256.

This SAE Standard incorporates driving cycles that produce fuel consumption data relating to Urban, Suburban, and Interstate driving patterns and is intended to be used to determine the relative fuel economy among vehicles and driving patterns under warmed-up conditions on test tracks, suitable roads, or chassis dynamometers.1

This procedure is a modification of the urban driving cycles noted in SAE J1082 and which is run on a suitable road or test track. The procedure yields cold start/warm-up fuel economy values indicative of consumer level at the ambient condition of the test. Within referenced limitations, the procedure can be utilized to determine the fuel economy differential among vehicles or between vehicle changes.

This procedure incorporates driving cycles that produce fuel consumption data relating to Urban, Suburban, and Interstate driving patterns. The procedure is intended to be used to determine the relative fuel economy among vehicles and driving patterns under warmed-up conditions on a test track or on suitable roads. The urban driving cycle forms the basis of a Cold-Start Test Procedure described in SAE Recommended Practice SAE J1256.

This procedure incorporates driving cycles that produce fuel consumption data relating to urban, suburban, and interstate driving patterns. The procedure is intended to be used to determine the relative fuel economy among vehicles and driving patterns under warmed-up conditions on a test track or on suitable roads.

This procedure incorporates driving cycles that produce fuel consumption data relating to Urban, Suburban, and Interstate driving patterns. The procedure is intended to be used to determine the relative fuel economy among vehicles and driving patterns under warmed-up conditions on a test track or on suitable roads.

This procedure incorporates a modified driving cycle replicate of consumer operation as contained and shown in SAE J1082b (January, 1979) and which is run on a suitable road or test track. The procedure yields cold start and warm-up fuel economy values indicative of consumer level at the ambient condition of the test. Within referenced limitations, the procedure can be utilized to determine the fuel economy differential among vehicles or between vehicle changes.