Refine Your Search

Topic

Search Results

Standard

Specification Definitions-Loaders

1992-06-01
HISTORICAL
J732_199206
This SAE standard provides uniform definitions of specification terms peculiar to loaders as defined in SAE J1057. The specifications must be qualified by stating the track shoe type, width or the tire type, size, ply, and specified inflation pressure; the model number or type of bucket disregarding teeth; and the type and amount of counterweight and/or ballast, if any, with which the machine is equipped. Paragraphs 4.1 and 4.16 are further defined by Figures 1 to 4. The figures are not intended to be exactly descriptive of any particular machine.
Standard

Specification Definitions--Off-Road Work Machines

2003-05-08
CURRENT
J1234_200305
This standard is applicable to off-road work machines, base machine and its equipment, included in categories 1.1, 1.2, 2, 3, and 5 of J1116. Purpose This standard defines dimensional, mass, and performance terms.
Standard

Specification Definitions--Off-Road Work Machines

1978-06-01
HISTORICAL
J1234_197806
This standard is applicable to off-road work machines, base machine and its equipment, included in categories 1.1, 1.2, 2, 3, and 5 of J1116. Purpose This standard defines dimensional, mass, and performance terms.
Standard

Specification Definitions--Hydraulic Backhoes

1980-04-30
HISTORICAL
J49_198004
The purpose of this standard is to establish a uniform method of providing dimensional operational specifications for hydraulic backhoes. This standard includes the definitions of specification most commonly used to describe nonfull-rotating hydraulic backhoes. Dimensional and operational specifications are to be determined without assembly or equipment changes such as buckets, dippersticks, etc. When specifications are affected by adjustable or extendable members, the position must be specified. Paragraphs 4.2.1-6.2 are further defined by Figs. 1-8. Figs 1-8 are not intended to be descriptive of any existing machine and are used only to clarify the meaning of the standard.
Standard

Specification Definitions - Loaders

2007-04-30
HISTORICAL
J732_200704
This SAE standard provides uniform definitions of specification terms peculiar to loaders as defined in SAE J1057. The specifications must be qualified by stating the track shoe type, width or the tire type, size, ply, and specified inflation pressure; the model number or type of bucket disregarding teeth; and the type and amount of counterweight and/or ballast, if any, with which the machine is equipped. Paragraphs 4.1 and 4.16 are further defined by Figures 1 to 4. The figures are not intended to be exactly descriptive of any particular machine.
Standard

Specification Definitions - Loaders

1975-06-01
HISTORICAL
J732C_197506
This SAE standard provides uniform definitions of specification terms peculiar to loaders as defined in SAE J1057. The specifications must be qualified by stating the track shoe type, width or the tire type, size, ply, and specified inflation pressure; the model number or type of bucket disregarding teeth; and the type and amount of counterweight and/or ballast, if any, with which the machine is equipped. Paragraphs 4.1 and 4.16 are further defined by Figures 1 to 4. The figures are not intended to be exactly descriptive of any particular machine.
Standard

Specification Definitions - Loaders

2012-06-28
CURRENT
J732_201206
This SAE standard provides uniform definitions of specification terms peculiar to loaders as defined in SAE J1057. The specifications must be qualified by stating the track shoe type, width or the tire type, size, ply, and specified inflation pressure; the model number or type of bucket disregarding teeth; and the type and amount of counterweight and/or ballast, if any, with which the machine is equipped. Paragraphs 4.1 and 4.16 are further defined by Figures 1 to 4. The figures are not intended to be exactly descriptive of any particular machine.
Standard

Specification Definitions - Hydraulic Backhoes

2018-11-14
CURRENT
J49_201811
This standard applies to hydraulic backhoes which have no more than 190 degrees of rotational swing and are mounted on wheeled tractors and crawler tractors.
Standard

Specification Definitions - Hydraulic Backhoes

1978-05-01
HISTORICAL
J49_197805
1.1 This standard applies to hydraulic backhoes which have no more than 190 degrees of rotational swing, and are mounted on wheel tractors and crawler tractors. 1.2 Purpose The purpose of the standard is to establish a uniform method of providing dimensional and operational specifications for hydraulic backhoes. Dimensional and operational specifications are determined without assembly or equipment changes such as buckets, dippersticks, etc. When specifications are affected by adjustable or extendable members, the position must be specified. 4.2.1 – 6.2 are further defined by Figures 1–8. Figures 1–8 are not intended to be descriptive of any existing machine and are used only to clarify the meaning of the standard.
Standard

Specification Definitions - Hydraulic Backhoes

2012-07-16
HISTORICAL
J49_201207
This standard applies to hydraulic backhoes which have no more than 190 degrees of rotational swing, and are mounted on wheel tractors and crawler tractors.
Standard

Rated Operating Load for Loaders Equipped with Log or Material Forks Without Vertical Mast

2011-10-27
CURRENT
J1197_201110
This SAE Recommended Practice applies to wheel and crawler loaders when equipped with log or material handling forks without vertical masts, taking only hydraulic lift capacity and operating stability into consideration. It is recognized that specific operating conditions may allow larger, or require smaller loads than the rated operating load. Some conditions would require more careful or restricted operation with the rated operating load. This practice is not to be construed as setting up test procedures or conditions.
Standard

Rated Operating Load for Loaders Equipped with Log or Material Forks Without Vertical Mast

2002-10-31
HISTORICAL
J1197_200210
This SAE Recommended Practice applies to wheel and crawler loaders when equipped with log or material handling forks without vertical masts, taking only hydraulic lift capacity and operating stability into consideration. It is recognized that specific operating conditions may allow larger, or require smaller loads than the rated operating load. Some conditions would require more careful or restricted operation with the rated operating load. This practice is not to be construed as setting up test procedures or conditions.
Standard

Rated Operating Load for Loaders Equipped With Log Or Material Forks Without Vertical Mast

1991-02-01
HISTORICAL
J1197_199102
This SAE Recommended Practice applies to wheel and crawler loaders when equipped with log or material handling forks without vertical masts, taking only hydraulic lift capacity and operating stability into consideration. It is recognized that specific operating conditions may allow larger, or require smaller, loads than the rated operating load. some conditions would require more careful or restricted operation with the rated operating load. This practice is not to be construed as setting up test procedures or conditions. This document establishes the definition of a normal all day rated operating load for loaders as defined in SAE J/ISO 6165.
Standard

Rated Operating Load for Loaders

1987-05-01
HISTORICAL
J818_198705
This SAE Standard establishes the definition of a normal all day rated operating load for loaders as defined in SAE J1057. This SAE Standard applies to wheel and crawler loaders taking only hydraulic lift capacity and tipping capacity into consideration. It is recognized that specific operating conditions may allow larger, or require smaller loads than the rated operating load. Some conditions could require more careful or restricted operation with the rated operating load. This standard is not to be construed as setting up test procedures or conditions.
Standard

Rated Operating Load for Loaders

2007-04-30
HISTORICAL
J818_200704
This SAE Standard establishes the definition of a normal all day rated operating load for loaders as defined in SAE J1057. This SAE Standard applies to wheel and crawler loaders taking only hydraulic lift capacity and tipping capacity into consideration. It is recognized that specific operating conditions may allow larger, or require smaller loads than the rated operating load. Some conditions could require more careful or restricted operation with the rated operating load. This standard is not to be construed as setting up test procedures or conditions.
Standard

Rated Operating Load for Loaders

1975-06-01
HISTORICAL
J818A_197506
This SAE Standard establishes the definition of a normal all day rated operating load for loaders as defined in SAE J1057. This SAE Standard applies to wheel and crawler loaders taking only hydraulic lift capacity and tipping capacity into consideration. It is recognized that specific operating conditions may allow larger, or require smaller loads than the rated operating load. Some conditions could require more careful or restricted operation with the rated operating load. This standard is not to be construed as setting up test procedures or conditions.
Standard

Rated Operating Load for Loaders

1976-10-01
HISTORICAL
J818B_197610
This SAE Standard establishes the definition of a normal all day rated operating load for loaders as defined in SAE J1057. This SAE Standard applies to wheel and crawler loaders taking only hydraulic lift capacity and tipping capacity into consideration. It is recognized that specific operating conditions may allow larger, or require smaller loads than the rated operating load. Some conditions could require more careful or restricted operation with the rated operating load. This standard is not to be construed as setting up test procedures or conditions.
Standard

Rated Operating Load for Loaders

2013-01-02
CURRENT
J818_201301
This SAE Standard establishes the definition of a normal all day rated operating load for loaders as defined in SAE J1057. This SAE Standard applies to wheel and crawler loaders taking only hydraulic lift capacity and tipping capacity into consideration. It is recognized that specific operating conditions may allow larger, or require smaller loads than the rated operating load. Some conditions could require more careful or restricted operation with the rated operating load. This standard is not to be construed as setting up test procedures or conditions.
Standard

Product Identification Numbering System of Off-Road Work Machines

1987-09-01
HISTORICAL
J1360_198709
This standard has been established for the development and implementation of a product identification numbering system. This standard covers off-road, self-propelled work machines (agricultural, construction, forestry, industrial, and mining) as categorized in SAE J1116.
X