Refine Your Search

Date

Date

Topic

Topic

Vehicles and equipment OPTC1, Personnel Protection (General) Noise Exhaust emissions Vehicle dynamics

Search Results

Viewing 1 to 20 of 52
123Next >Last >>
Sort by title
Standard

Unauthorized Starting or Movement of Machines
2002-12-18
HISTORICAL
J1083_200212
This SAE Recommended Practice applies to construction, general purpose industrial, forestry, and specialized mining machinery as categorized in SAE J1116. It describes the machine components and systems that should be disconnected, secured, or otherwise rendered inoperative. Deterrent systems or devices covered by this recommended practice are to be used when the machine is shut down per the manufacturer's shut down instructions. It is not the intent of this recommended practice to protect the machine or the authorized machine operator, or to protect against abuse, destructive vandalism, or theft.
Standard

UNAUTHORIZED STARTING OR MOVEMENT OF MACHINES
1980-02-01
HISTORICAL
J1083_198002
This recommended practice applies to construction, general purpose industrial, forestry, and specialized mining machinery as categorized in SAE J1116 (May 1979). It describes the machine components and systems that should be disconnected, secured, or otherwise rendered inoperative.
Standard

UNAUTHORIZED STARTING OR MOVEMENT OF MACHINES
1985-07-01
HISTORICAL
J1083_198507
This Recommended Practice applies to construction, general purpose industrial, forestry, and specialized mining machinery as categorized in SAE J1116 JUN85. It describes the machine components and systems that should be disconnected, secured, or otherwise rendered inoperative. Deterrent systems or devices covered by this Recommended Practice are to be used when the machine is shut down per the manufacturer's shut down instructions. It is not the intent of this Recommended Practice to protect the machine or the authorized machine operator, or to protect against abuse, destructive vandalism, or theft.
Standard

Three-Point Hitch (Type A) Backhoe Personnel Protection
2019-08-28
CURRENT
J1518_201908
This SAE Recommended Practice applies to three-point hitch (Type A) backhoes as defined in SAE J326 when mounted on either an agricultural tractor as defined in ANSI/ASAE S390 or other off-road self-propelled work machine as defined in SAE J1116. This criterion is intended for the manufacturer of the backhoe, whether or not the backhoe is manufactured or marketed by the same company that manufactures or markets the propelling machine.
Standard

Three-Point Hitch (Type A) Backhoe Personnel Protection
2013-10-21
HISTORICAL
J1518_201310
This SAE Recommended Practice applies to three-point hitch (Type A) backhoes as defined in SAE J326 when mounted on either an agricultural tractor as defined in ANSI/ASAE S390 or other off-road self-propelled work machine as defined in SAE J1116. This criterion is intended for the manufacturer of the backhoe, whether or not the backhoe is manufactured or marketed by the same company that manufactures or markets the propelling machine.
Standard

Three Point Hitch (Type A) Backhoe Personnel Protection
2003-05-30
HISTORICAL
J1518_200305
Minimum performance criteria for operator and bystander protection in this document apply to three point hitch (Type A) backhoes as defined in SAE J326 when mounted on any agricultural tractor (SAE J1150) or other off-road self-propelled work machine (SAE J1116). This criteria includes backhoes which may not be manufactured and/or marketed by the same company that manufactures and/or markets the propelling machine and is intended for the backhoe manufacturer.
Standard

THREE POINT HITCH (TYPE A) BACKHOE PERSONNEL PROTECTION
1986-06-01
HISTORICAL
J1518_198606
Minimum performance criteria for operator and bystander protection in this document apply to three point hitch (Type A) backhoes as defined in SAE J326 when mounted on any agricultural tractor (SAE J1150) or other off-road self-propelled work machine (SAE J1116 JUNE 81). This criteria includes backhoes which may not be manufactured and/or marketed by the same company that manufactures and/or markets the propelling machine and is intended for the backhoe manufacturer.
Standard

Steering for Off-Road, Rubber-Tired Machines
2019-07-29
CURRENT
J1511_201907
This SAE Standard applies to off-road rubber-tired machines having rated speed capability exceeding 20 km/h. Only the following machine categories in SAE J1116 are included in the scope of this document. a. Earthmoving b. Other than earthmoving: except rollers and compactors c. General purpose industrial d. Forestry e. Specialized mining machinery Applicable steering systems include the following means of providing power for steering: a. Manual steering b. Power-assisted steering c. Full-power steering This document does not imply that secondary steering is mandatory. However, if secondary steering is provided, performance and test requirements are included.
Standard

Shielding of Starter System Energization
2002-12-19
HISTORICAL
J1493_200212
This SAE Standard specifies the requirements to help prevent inadvertent and to discourage deliberate electrical connection at the starter motor solenoid or starter relay which may result in the starter pinion engaging the ring gear. This document applies to off-road, self-propelled work machines, as identified in SAE J1116, which have the potential of powered movement as a direct result of the starter pinion engaging the ring gear.
Standard

STEERING FOR OFF-ROAD, RUBBER-TIRED MACHINES TECHNICALLY EQUIVALENT TO ISO 5010 FOR OFF-ROAD MACHINERY
1990-10-01
HISTORICAL
J1511_199010
This SAE Standard applies to off-road rubber-tired machines having rated speed capability exceeding 20 km/h. The following machine categories in J1116 are included in the scope of this document: a Earthmoving b Other than earthmoving: except rollers and compactors c General purpose industrial d Forestry e Specialized mining machinery Applicable steering systems include the following means of providing power for steering: a Manual steering b Power-assisted steering c Full-power steering This document does not imply that secondary steering is mandatory. However, if secondary steering is provided, performance and test requirements are included.
Standard

SAFETY FOR INDUSTRIAL FLAIL MOWERS
1986-05-01
HISTORICAL
J1001_198605
This practice includes industrial-type flail mowers designed for operation with tractors having at least 20 hp (15 kW) and used for cutting grass adjacent to highways or similar types of grass and growth control.
Standard

SAFETY FOR INDUSTRIAL FLAIL MOWERS
1980-12-01
HISTORICAL
J1001_198012
This practice includes industrial-type flail mowers designed for operation with tractors having at least 20 hp (15 1cW) and used for cutting grass adjacent to highways or similar types of grass and growth control.
Standard

Personnel Protection—Skid Steer Loaders
2008-02-20
HISTORICAL
J1388_200802
This SAE Standard is intended to provide personnel protection guidelines for skid steer loaders. This document is intended as a guide towards standard practice, but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. This document provides performance criteria for newly manufactured loaders and it is not intended for in-service machines.
Standard

Personnel Protection - Skid Steer Loaders
2003-06-18
HISTORICAL
J1388_200306
This SAE Standard is intended to provide personnel protection guidelines for skid steer loaders. This document is intended as a guide towards standard practice, but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. This document provides performance criteria for newly manufactured loaders and it is not intended for in-service machines.
Standard

Personnel Protection - Compact Tool Carriers
2021-07-07
CURRENT
J2752_202107
This SAE Recommended Practice applies to compact tool carriers sometimes called, but not limited to mini-loaders, mini skid-steer loaders or compact utility loaders. Machines having a seated-operator position are excluded from this standard. However, certain attachments for a compact tool carrier may provide a seated-operator position for the operation of the attachment.
Standard

Personnel Protection - Compact Tool Carriers
2010-06-21
HISTORICAL
J2752_201006
This SAE Recommended Practice applies to compact tool carriers sometimes called, but not limited to mini-loaders, mini skid-steer loaders or compact utility loaders. Machines having a seated-operator position are excluded from this standard. However, certain attachments for a compact tool carrier may provide a seated-operator position for the operation of the attachment.
123Next >Last >>
X