Refine Your Search

Date

Date

Topic

Topic

Pistons Optics Silicon alloys Piston and Ring Standards Committee Tests and Testing

Search Results

Viewing 1 to 20 of 63
123Next >Last >>
Sort by title
Standard

Power Cylinder Scuffing: Mechanisms
2020-08-12
CURRENT
J3070_202008
This document describes the various scuffing failure modes of the power cylinder system in an internal combustion engine. The causes and preventative measures for each failure mode are discussed. It should be noted that many remedies for scuff can lead to NVH (noise vibration and harshness) issues. However, NVH is not considered in this document.
Standard

Power Cylinder Oil Consumption: Transport Mechanisms
2023-02-21
WIP
J2794
This document covers oil transport mechanisms from the power cylinder system which might affect oil consumption. It will not discuss in detail the oil consumption mechanisms from other systems or engine components.
Standard

Power Cylinder Oil Consumption: Transport Mechanisms
2007-02-07
HISTORICAL
J2794_200702
This document covers oil transport mechanisms from the power cylinder which might affect oil consumption. It will not discuss in detail the oil consumption mechanisms from other components.
Standard

Power Cylinder Oil Consumption: Transport Mechanisms
2018-07-27
CURRENT
J2794_201807
This document covers oil transport mechanisms from the power cylinder system which might affect oil consumption. It will not discuss in detail the oil consumption mechanisms from other systems or engine components.
Standard

Power Cylinder Friction: Mechanisms
2010-01-14
HISTORICAL
J2904_201001
This document covers the mechanisms from the power cylinder which contribute to the mechanical friction of an internal combustion engine. It will not discuss in detail the influence of other engine components or engine driven accessories on friction.
Standard

Power Cylinder Friction: Mechanisms
2018-05-16
HISTORICAL
J2904_201805
This document covers the mechanisms from the power cylinder which contribute to the mechanical friction of an internal combustion engine. It will not discuss in detail the influence of other engine components or engine driven accessories on friction.
Standard

Power Cylinder Blow-by: Blow-by Mechanisms
2022-02-15
CURRENT
J2797_202202
This document covers the mechanisms associated with the power cylinder system which might affect blow-by. It will not discuss in detail the blow-by mechanisms from other systems or engine subsystems.
Standard

Power Cylinder Blow-By: Blow-By Mechanisms
2014-08-28
HISTORICAL
J2797_201408
This document covers the mechanisms associated with the power cylinder system which might affect blow-by. It will not discuss in detail the blow-by mechanisms from other systems or engine subsystems.
Standard

Power Cylinder Blow-By: Blow-By Mechanisms
2007-02-07
HISTORICAL
J2797_200702
This document covers the mechanisms associated with the power cylinder which might affect blow-by. It will not discuss in detail the blow-by mechanisms from other engine subsystems.
Standard

Internal Combustion Engines—Piston Vocabulary
2002-01-23
HISTORICAL
J2612_200201
This SAE Standard defines the most commonly used terms for pistons. These terms designate either types of pistons or certain characteristics and phenomena of pistons. The terms and definitions apply to pistons for reciprocating internal combustion engines and compressors working under analogous conditions.
Standard

Internal Combustion Engines—Piston Rings—Vocabulary
1998-04-17
HISTORICAL
J1588_199804
Differences, where they exist, are shown in Appendix A with associated rationale. This SAE Standard defines the most commonly used terms for piston rings. These terms designate either types of piston rings or certain characteristics and phenomena of piston rings. The terms and definitions apply to piston rings for reciprocating internal combustion engines and compressors working under analogous conditions. Appendix B is included which lists equivalent terms in English, French, Russian, German, Spanish, Portuguese, Italian, and Japanese.
Standard

Internal Combustion Engines—Piston Rings—Scraper Rings
1998-04-17
HISTORICAL
J1999_199804
Differences, where they exist, are shown in Appendix A. This SAE Standard specifies the essential dimensional features of N, NM, E, and EM scraper piston ring types. Dimensional Tables 7 and 8 offer the choice of two radial wall thicknesses: a Radial wall thickness "regular" (Table 7) b Radial wall thickness "D/22" (Table 8) The requirements of this document apply to scraper rings for reciprocating internal combustion piston engines up to and including 200 mm diameter. They may also be used for piston rings of compressors working under similar conditions.
Standard

Internal Combustion Engines—Piston Rings—Rectangular Rings
1998-04-01
HISTORICAL
J1997_199804
Differences, where they exist, are shown in Appendix A. This SAE Standard specifies the essential dimensional features of R, B, and M rectangular piston ring types. Dimensional Tables 8 and 9 offer the choice of two radial wall thicknesses: a Radial wall thickness "regular" (Table 8) b Radial wall thickness "D/22" (Table 9) The requirements of this document apply to rectangular rings for reciprocating internal combustion piston engines up to and including 200 mm diameter. They may also be used for piston rings of compressors working under similar conditions.
Standard

Internal Combustion Engines—Piston Rings—Quality Requirements
1998-04-17
HISTORICAL
J1996_199804
Differences, where they exist, are shown in Appendix A. This SAE Standard specifies the quality aspects that are capable of definition but not normally found on a drawing specification. The difficulty of trying to define in absolute terms the quality attainable in normal commercial manufacture of piston rings is well known. In this document the commonly encountered aspects of quality in terms of casting defects and other departures from ideal are quantified. Many minor defects are clearly quite acceptable; other defects because of size or numbers are inadmissible.
Standard

Internal Combustion Engines—Piston Rings—Oil Control Rings
1998-04-01
HISTORICAL
J2002_199804
Differences, where they exist, are shown in Appendix A. This SAE Standard specifies the dimensional features of S, G, D, and DV oil control piston ring types. The normal range for the axial width of oil control rings (2.5 to 8 mm inclusive) is divided into 0.5 or 1.0 increments. In Table 7, dimensions in inch units are given for oil control rings with axial width 4.75 mm (equal to 3/16 in) for existing applications. The requirements of this document apply to oil control rings for reciprocating internal combustion piston engines up to and including 200 mm in diameter. They may also be used for piston rings of compressors working under similar conditions.
123Next >Last >>
X