Refine Your Search

Topic

Search Results

Standard

Using Engine Test Data to Model Engine Performance

2012-11-01
CURRENT
AIR5509
This document defines the process steps involved in collecting and processing engine test data for use in understanding engine behavior. It describes the use of an aero-thermal cycle model for reduction and analysis of those data. The analysis process may include the calculation of modifiers to match the model to measured data, and prediction of engine performance based on that analysis
Standard

Using Engine Test Data to Model Engine Performance

2015-10-13
WIP
AIR5509A
This document defines the process steps involved in collecting and processing engine test data for use in understanding engine behavior. It describes the use of an aero-thermal cycle model for reduction and analysis of those data. The analysis process may include the calculation of modifiers to match the model to measured data, and prediction of engine performance based on that analysis
Standard

Supplemental Propulsion System Performance Station Designation

2019-01-03
CURRENT
AIR6508
This SAE Aerospace Information Report (AIR) supplements the AS755 performance station designation system for complex or unconventional propulsion cycles and their derivatives. The station numbering conventions presented herein are for use in all communications concerning propulsion system performance such as computer programs, data reduction, design activities, and published documents. They are intended to facilitate calculations by the program user without unduly restricting the method of calculation used by the program supplier. The contents of this document will follow AS755 and AS6502 where applicable. The list of symbols presented herein will be used for identification of input and output parameters. These symbols are not required to be used as internal parameter names within the engine subprogram.
Standard

Shared Memory Interface for Gas Turbine Engine Performance Programs

2016-10-31
WIP
ARP7998
This is a recommended practice for an interface to supplier simulations that utilize traditional interprocess communication (IPC) methods of shared memory and semaphore communications. These IPC methods are fairly standard practice in the computer science world, that allow for communication by separate processes running on a computer without any common runtime requirements of each process being run. So 32bit applications can talk with 64 bit applications as well as any other compiler or runtime dependency being needed by the calling program to interface with the called system. This also allows the calling program and the called program to be run on separate CPUs to allow parallel execution of the called program as well as multiple instances of the called program to execute all on separate processors.
Standard

Real-Time Modeling Methods for Gas Turbine Engine Performance

2015-10-20
WIP
AIR4548B
This SAE Aerospace Information Report (AI) provides a review of real-time modeling methodologies for gas turbine engine performance. The application of real-time models and modeling methodologies are discussed. The modeling methodologies addressed in this AIR concentrate on the aerothermal portion of the gas turbine propulsion system. Characteristics of the models, the various algorithms used in them, and system integration issues are also reviewed. In addition, example cases of digital models in source code are provided for several methodologies.
Standard

Real-Time Modeling Methods for Gas Turbine Engine Performance

2001-07-01
CURRENT
AIR4548A
This SAE Aerospace Information Report (AIR) provides a review of real-time modeling methodologies for gas turbine engine performance. The application of real-time models and modeling methodologies are discussed. The modeling methodologies addressed in this AIR concentrate on the aerothermal portion of the gas turbine propulsion system. Characteristics of the models, the various algorithms used in them, and system integration issues are also reviewed. In addition, example cases of digital models in source code are provided for several methodologies.
Standard

REAL-TIME MODELING METHODS FOR GAS TURBINE ENGINE PERFORMANCE

1995-12-01
HISTORICAL
AIR4548
This SAE Aerospace Information Report (AIR) provides a review of real-time modeling methodologies for gas turbine engine performance. The application of real-time models and modeling methodologies are discussed. The modeling methodologies addressed in this AIR concentrate on the aerothermal portion of the gas turbine propulsion system. Characteristics of the models, the various algorithms used in them, and system integration issues are also reviewed. In addition, example cases of digital models in source code are provided for several methodologies.
Standard

Methods for Executing Gas Turbine Engine Performance Programs to Generate Envelope Performance for Customers

2017-04-10
WIP
AIR7486
This is an initial release of an Aerospace Information Report to provide methods for Engine Suppliers to follow to execute their in house performance models to generate datasets that are provided to airframe customers early in the conceptual design phase of an aircraft program. This AIR provides some general guidance for execution order and input settings to be used to execute the model.
Standard

Gas Turbine Engine Performance Presentation for Digital Computer Programs Using Fortran 77

1989-07-01
HISTORICAL
ARP4191
This SAE Aerospace Recommended Paractice (ARP) provides a method for digital computer programs for gas turbine engine performance, steady-state or transient, performance to be written using the FORTRAN 77 language. When it is agreed between the program User and Supplier that a particular program shall be supplied in FORTRAN 77, it is recommended that this ARP be used in conjunction with AS681 for steady-state and transient programs. This ARP also describes how to take advantage of the FORTRAN 77 CHARACTER storage to extend the information interface between the calling program and the engine subroutine. The ARP has the same major section numbers as AS681 to facilitate its use with this document. The information given in each section of this ARP is additional to that given in AS 681.
Standard

Gas Turbine Engine Performance Presentation for Computer Programs

2018-05-01
WIP
AS681L

This SAE Aerospace Standard (AS) provides the method for presentation of gas turbine engine steady state and transient performance calculated using computer programs. It also provides for the presentation of parametric gas turbine data including performance, weight, and dimensions computed by computer programs.

This standard is intended to facilitate calculations by the program user without unduly restricting the method of calculation used by the program supplier. This standard is applicable to, but not limited to the following program types: data reduction, steady-state, transient, preliminary design, study, specification, status, and parametric programs.

Standard

Gas Turbine Engine Performance Presentation for Computer Programs

2016-06-06
CURRENT
AS681K
This SAE Aerospace Standard (AS) provides the method for presentation of gas turbine engine steady-state and transient performance calculated using computer programs. It also provides for the presentation of parametric gas turbine data including performance, weight, and dimensions computed by computer programs. This standard is intended to facilitate calculations by the program user without unduly restricting the method of calculation used by the program supplier. This standard is applicable to, but not limited to the following program types: data reduction, steady-state, transient, preliminary design, study, specification, status, and parametric programs.
Standard

Gas Turbine Engine Performance Presentation for Computer Programs

2008-06-12
HISTORICAL
AS681J
This SAE Aerospace Standard (AS) provides the method for presentation of gas turbine engine steady-state and transient performance calculated using computer programs. It also provides for the presentation of parametric gas turbine data including performance, weight and dimensions computed by computer programs. This standard is intended to facilitate calculations by the program user without unduly restricting the method of calculation used by the program supplier. This standard is applicable to, but not limited to the following program types: data reduction, steady-state, transient, preliminary design, study, specification, status & parametric programs.
Standard

Gas Turbine Engine Performance Presentation and Nomenclature for Digital Computers Using Object-Oriented Programming

2005-01-11
HISTORICAL
ARP5571
This document provides recommendations for several aspects of air-breathing gas turbine engine performance modeling using object-oriented programming systems. Nomenclature, application program interface, and user interface are addressed with the emphasis on nomenclature. The Numerical Propulsion System Simulation (NPSS) modeling environment is frequently used in this document as an archetype. Many of the recommendations for standards are derived from NPSS standards. NPSS was chosen because it is an available, production system. The practices recommended herein may be applied to other object-oriented systems. While this document applies broadly to any gas turbine engine, the great majority of engine performance computer programs have historically been written for aircraft propulsion systems. Aircraft and propulsion terminology and examples appear throughout.
Standard

Gas Turbine Engine Performance Presentation and Nomenclature For Object-Oriented Computer Programs

2013-10-04
HISTORICAL
ARP5571B
This document provides recommendations for several aspects of air-breathing gas turbine engine performance modeling using object-oriented programming systems. Nomenclature, application program interface, and user interface are addressed with the emphasis on nomenclature. The Numerical Propulsion System Simulation (NPSS) modeling environment is frequently used in this document as an archetype. Many of the recommendations for standards are derived from NPSS standards. NPSS was chosen because it is an available product. The practices recommended herein may be applied to other object-oriented systems. While this document applies broadly to any gas turbine engine, the great majority of engine performance computer programs have historically been written for aircraft propulsion systems. Aircraft and propulsion terminology and examples appear throughout.
Standard

Gas Turbine Engine Performance Presentation and Nomenclature For Object-Oriented Computer Programs

2018-05-07
CURRENT
ARP5571C
This document provides recommendations for several aspects of air-breathing gas turbine engine performance modeling using object-oriented programming systems. Nomenclature, application program interface, and user interface are addressed with the emphasis on nomenclature. The Numerical Propulsion System Simulation (NPSS) modeling environment is frequently used in this document as an archetype. Many of the recommendations for standards are derived from NPSS standards. NPSS was chosen because it is an available product. The practices recommended herein may be applied to other object-oriented systems. While this document applies broadly to any gas turbine engine, the great majority of engine performance computer programs have historically been written for aircraft propulsion systems. Aircraft and propulsion terminology and examples appear throughout.
Standard

Gas Turbine Engine Performance Presentation and Nomenclature For Object-Oriented Computer Programs

2008-12-17
HISTORICAL
ARP5571A
This document provides recommendations for several aspects of air-breathing gas turbine engine performance modeling using object-oriented programming systems. Nomenclature, application program interface, and user interface are addressed with the emphasis on nomenclature. The Numerical Propulsion System Simulation (NPSS) modeling environment is frequently used in this document as an archetype. Many of the recommendations for standards are derived from NPSS standards. NPSS was chosen because it is an available product. The practices recommended herein may be applied to other object-oriented systems. While this document applies broadly to any gas turbine engine, the great majority of engine performance computer programs have historically been written for aircraft propulsion systems. Aircraft and propulsion terminology and examples appear throughout.
Standard

Gas Turbine Engine Interface Test Data Reduction Computer Programs

2002-12-12
HISTORICAL
ARP1210D
This SAE Aerospace Recommended Practice (ARP) describes a class of digital computer programs for use by organizations other than the engine supplier for reduction of engine test data relating to the interface of the engine in the airframe or test facility. This ARP also is intended as a guide for the preparation of such computer programs.
Standard

GAS TURBINE ENGINE INTERFACE TEST DATA REDUCTION COMPUTER PROGRAMS

1990-11-01
HISTORICAL
ARP1210B
This Aerospace Recommended Practice (ARP) describes a class of digital computer programs for use by organizations other than the engine supplier for reduction of engine test data relating to the interface of the engine in the airframe or test facility. This ARP also is intended as a guide for the preparation of such computer programs.
Standard

GAS TURBINE ENGINE INTERFACE TEST DATA REDUCTION COMPUTER PROGRAMS

1996-11-01
HISTORICAL
ARP1210C
This SAE Aerospace Recommended Practice (ARP) describes a class of digital computer programs for use by organizations other than the engine supplier for reduction of engine test data relating to the interface of the engine in the airframe or test facility. This ARP also is intended as a guide for the preparation of such computer programs.
X