Search Results

This document establishes the minimum requirements for seats and restraint systems for the flight deck. Due to limitations that it would place upon basic aircraft design, it is not considered practical for these requirements to apply fully to the observer seat. However, it is emphasized that every effort should be made to provide the observer seat position with an equivalent level of comfort and safety. This document is also intended to make recommendations for flight crew restraint systems. A properly designed crew restraint system will mminimize injury or debilitation during a survivable crash and enable post crash assistance to occupants and escape from the aircraft. Crew member safety is the primary objective, with appropriate provisions for crew comfort taken into consideration. The criteria established herein are designed to standardize restraint systems without hindering the development of new, improved systems.

This document recommends criteria to assure adequate visibility from the flight deck. The flight deck windshield must provide sufficient external vision to permit the pilot to perform any maneuvers within the operating limits of the aircraft safely and at the same time afford and unobstructed view of the flight instruments and other critical components and displays from the same eye position.

This document recommends criteria to assure adequate visibility from the flight deck. The flight deck windshield must provide sufficient external vision to permit the pilot to perform any maneuvers within the operating limits of the aircraft safely and at the same time afford an unobstructed view of the flight instruments and other critical components and displays from the same eye position.

This document recommends design criteria for the flight deck installation of electrically signaled flight control systems on fixed wing airplanes.

This document recommends criteria for the flight deck display of an On Board Weight and Balance System. The system may have the capability of a primary operational device or be a secondary advisory source of information of weight and center of gravity position. The recommendations apply to transport aircraft and describe the operational and functional requirements for the display of an On Board Weight and Balance System.

This document recommends criteria for the flight deck display of an On Board Weight and Balance System. The system may have the capability of a primary operational device or be a secondary advisory source of information of weight and center of gravity position. The recommendations apply to transport aircraft and describe the operational and functional requirements for the display of an On Board Weight and Balance System.

The scope of this document is to provide review of recent history of loss-of-control accidents during airline revenue operations.

pilots, air traffic controllers, dispatchers, aviation meteorologists

This document recommends criteria for the installation and operation of a printer intended for use by flight crew members on the flight deck. The printer is used to supply the flight crew with hard copies of information that originates from data sources such as FMS, EDMS, ACMS, CMS, and data link. These criteria are in addition to the specifications of the referenced ARINC Characteristic 744A.

This document recommends criteria for the installation and operation of a printer intended for use by flight crew members on the flight deck. The printer is used to supply the flight crew with hard copies of information that originates from data sources such as FMS, EDMS, ACMS, CMS, and data link. These criteria are in addition to the specifications of the referenced ARINC Characteristic 744A.

The information contained in this document is based on line experience with current systems. It should be used as a basis for ongoing research and development including the human factors aspects of future flight management systems and their interaction with the ATC environment.

This document recommends criteria and requirements for a flight management system (FMS) for transport aircraft. The FMS shall provide the functions of lateral navigation, vertical navigation, and performance management and may include time of arrival control. The FMS design shall take human factors considerations into account to produce a fault tolerant system.

This document recommends criteria and requirements for a Flight Management System (FMS) for transport aircraft. The FMS shall provide the functions of Lateral Navigation, Vertical Navigation, and Performance Management and may include Time of Arrival Control. The FMS design shall take Human Factors considerations into account to produce a fault tolerant system.

This annex recommends additional design objectives applicable when control laws or control characteristics are modified for the purpose of Flight Envelope Awareness/Protection. While only manually controlled flight is addressed, it is assumed that Autoflight, Autothrottle, or Autothrust performance is compatible.

This document recommends criteria for the layout and for the design, installation, and operation of flight deck facilities for transport aircraft.

This document recommends criteria for standardizing flight deck interior doors and their operation to optimize their use under normal and emergency conditions.

This document recommends criteria for standardization of flight deck interior doors and their operation which will provide optimum use under normal and emergency conditions.

The purpose of this document is to recommend criteria for the provision of crew escape facilities from the flight deck area.