Search Results

This document establishes the minimum requirements for seats and restraint systems for the flight deck. Due to limitations that it would place upon basic aircraft design, it is not considered practical for these requirements to apply fully to the observer seat. However, it is emphasized that every effort should be made to provide the observer seat position with an equivalent level of comfort and safety. This document is also intended to make recommendations for flight crew restraint systems. A properly designed crew restraint system will mminimize injury or debilitation during a survivable crash and enable post crash assistance to occupants and escape from the aircraft. Crew member safety is the primary objective, with appropriate provisions for crew comfort taken into consideration. The criteria established herein are designed to standardize restraint systems without hindering the development of new, improved systems.

This document recommends criteria to assure adequate visibility from the flight deck. The flight deck windshield must provide sufficient external vision to permit the pilot to perform any maneuvers within the operating limits of the aircraft safely and at the same time afford and unobstructed view of the flight instruments and other critical components and displays from the same eye position.

This document recommends criteria for the flight deck display of an On Board Weight and Balance System. The system may have the capability of a primary operational device or be a secondary advisory source of information of weight and center of gravity position. The recommendations apply to transport aircraft and describe the operational and functional requirements for the display of an On Board Weight and Balance System.

This SAE Aerospace Recommended Practice (ARP) provides guidance to achieve the optimum integration of new aircraft systems which have an impact on the cockpit layout or crew operating procedures. This process may also be used for modification of existing cockpits.

pilots, air traffic controllers, dispatchers, aviation meteorologists

This document recommends criteria for the installation and operation of a printer on the flight deck, to supply the flight crew with hard copies of information that originates from data sources such as FMS, ELS/EDMS, ACMS, CMS, and Data Link. These criteria are in addition to the specifications of the referenced ARINC Characteristic 744A.

This document recommends criteria for the installation and operation of a printer intended for use by flight crew members on the flight deck. The printer is used to supply the flight crew with hard copies of information that originates from data sources such as FMS, EDMS, ACMS, CMS, and data link. These criteria are in addition to the specifications of the referenced ARINC Characteristic 744A.

This document recommends criteria for the installation and operation of a printer intended for use by flight crew members on the flight deck. The printer is used to supply the flight crew with hard copies of information that originates from data sources such as FMS, EDMS, ACMS, CMS, and data link. These criteria are in addition to the specifications of the referenced ARINC Characteristic 744A.

This document recommends criteria and requirements for a flight management system (FMS) for transport aircraft. The FMS shall provide the functions of lateral navigation, vertical navigation, and performance management and may include time of arrival control. The FMS design shall take human factors considerations into account to produce a fault tolerant system.

This annex recommends additional design objectives applicable when control laws or control characteristics are modified for the purpose of Flight Envelope Awareness/Protection. While only manually controlled flight is addressed, it is assumed that Autoflight, Autothrottle, or Autothrust performance is compatible.

This document recommends design criteria for the Flight Deck Alerting System. The FAS shall enhance safety of flight by providing early crew recognition of aircraft system or component status or malfunction as well as of crew operational error. The FAS, therefore, relates to aircraft configuration and flight phase as well as the aircraft systems. To fulfill this objective, the FAS must attract the attention of the crew, must state with clarity the nature and location of the problem, and must be highly reliable and thoroughly responsive to the operational requirements and environment. Wherever possible, it should provide guidance as to the corrective action.

This document recommends design criteria for the Flight Deck Alerting System. The FAS shall enhance safety of flight by providing early crew recognition of aircraft system or component status or malfunction as well as of crew operational error. The FAS, therefore, relates to aircraft configuration and flight phase as well as the aircraft systems. To fulfill this objective, the FAS must attract the attention of the crew, must state with clarity the nature and location of the problem, and must be highly reliable and thoroughly responsive to the operational requirements and environment. Wherever possible, it should provide guidance as to the corrective action.

This document recommends criteria and requirements for a Final Approach Spacing System (FASS) for transport aircraft. This is an Aerospace Recommended Practice to support the development of a Final Approach Spacing System (FASS) for Approach Spacing for Instrument Approaches (ASIA) operations.

This document recommends criteria for the installation and operation of a printer on the flight deck, to supply the flight crew with hard copies of information that originates from data sources such as FMS, ELS, ACMS, CMS, and Data Link. These criteria are in addition to the specifications of the referenced ARINC Characteristic 744A.

This SAE Aerospace Recommended Practice (ARP) recommends criteria for an Electronic Data Management System (EDMS) for use on the flight deck of transport aircraft. The EDMS may be the primary, and in some cases sole, on board source of documentation and information for flight operations, engineering, aircraft maintenance, cabin services, and training. This document addresses flight operations applications only. It addresses the requirements for the flight deck characteristics of airborne equipment elements for an Electronic Data Management System (EDMS), but not the ground support system requirements. Development of ground support systems for EDMS will be a significant task, which must take account of the end-user information handing requirements specified here. An Electronic Library System (ELS) is a partial implementation of EDMS, which incorporates only the data storage, retrieval and display functions.

This Aerospace Recommended Practice will identify the problem with latency in the pilot's instrument control of an aircraft. Recommended evaluation techniques to characterize control problems will be documented.

This document recommends criteria for a system designed to manage and communicate information via data link to support flight operations.

This document recommends criteria for a system designed to manage and communicate information via data link to support flight operations.

This document recommends provisions for crew safety and survival which are intended to apply to cargo or combination aircraft and equipment.

This document recommends provisions for crew safety and survival which are intended to apply to cargo or combination aircraft and equipment.