Search Results

Standard

Ship Systems and Equipment—Threaded Fasteners—Inspection, Test, and Installation Requirements

2003-06-16

HISTORICAL

J2270_200306

This SAE Standard covers both quality assurance and installation requirements for fasteners. This document establishes engineering criteria and guidance for quality assurance requirements (including Test and Inspection) for procurement of threaded fasteners where such criteria and guidance is not otherwise provided by existing fastener standards or specifications. The document also provides requirements and test procedures for self-locking fasteners including those manufactured by the installing activity. This document also provides requirements for the selection and use of fastener lubricants, additional corrosion protection treatments, fastener tightening procedures, and the use of thread-locking compounds.

Standard

Ship Systems and Equipment—Threaded Fasteners—Inspection, Test, and Installation Requirements

1998-10-01

HISTORICAL

J2270_199810

This SAE Standard covers both quality assurance and installation requirements for fasteners. This document establishes engineering criteria and guidance for quality assurance requirements (including Test and Inspection) for procurement of threaded fasteners where such criteria and guidance is not otherwise provided by existing fastener standards or specifications. The document also provides requirements and test procedures for self-locking fasteners including those manufactured by the installing activity. This document also provides requirements for the selection and use of fastener lubricants, additional corrosion protection treatments, fastener tightening procedures, and the use of thread-locking compounds.

Standard

Ship Systems and Equipment—Part Standard for Studs—Continuous and Double End (Metric)

2004-06-21

HISTORICAL

J2271M_200406

This SAE Parts Standard provides dimensional and quality assurance requirements for M6 through M36 metric sizes of studs in the following configurations in materials needed for ship system applications: a Continuous thread studs in M thread profile. b Double end studs—clamping type (also called bolt-studs) where both ends are of the same thread series but different lengths (M thread profile).

Standard

Ship Systems and Equipment—Part Standard for Studs—Continuous and Double End (Inch Series)

2009-01-23

HISTORICAL

J2271_200901

This SAE Parts Standard provides dimensional and quality assurance requirements for studs in the following configurations in standard materials used for ship system applications: a Continuous thread studs in UNRC and 8UNR series in the following threads and diameters: UNRC threads (0.190 through 4 inches) UNRF threads (0.190 through 1-1/2 inches) 8UNR threads (1-1/8 through 4 inches) b Double end studs (clamping type) where both ends are of the same thread length in the following threads and diameters: UNRC threads (1/4 through 4 inches) UNRF threads (1/4 through 1-1/2 inches) 8UNR threads (1-1/8 through 4 inches) c Double end studs (tap end type) where the tap end thread length is equivalent to 1-1/2 nominal diameters: NC-5 interference-fit tap end thread with UNRC, UNRF or 8UN nut end threads (1/4 through 1-1/2 inches) UNRC and 8 UN threads both ends (1/4 through 4 inches) UNRC threads both ends (1/4 through 1-1/2 inches)

Standard

Ship Systems and Equipment--Part Standard for Studs--Continuous and Double End (Inch Series)

2016-11-22

WIP

J2271

This SAE Parts Standard provides dimensional and quality assurance requirements for 1/4 through 2 in sizes of studs in the following configurations in standard materials used for ship system applications: a. Continuous thread studs in UNRC and 8UNR series. b. Double end studs (clamping type) where both ends are of the same thread length (UNRC or 8UN). Also called bolt-studs. (These are suitable for mating with nuts or the set end may be installed with anaerobic thread locking compound.) c. Double end studs (interference thread type) with the nut end having UNRC or 8UNR series thread and where the tap end has NC 5 HFS interference fit thread forms. Also called a tap end stud. A complete metric companion to this document is provided in SAE J2271M, therefore no metric equivalents are presented. These studs are primarily or use in ship systems and equipment.

Standard

Ship Systems and Equipment - Threaded Fasteners - Inspection, Test, and Installation Guidance

2019-02-13

WIP

J2270

This SAE Standard covers both quality assurance and installation requirements for fasteners.

This document establishes engineering criteria and guidance for quality assurance requirements (including Test and Inspection) for procurement of threaded fasteners where such criteria and guidance is not otherwise provided by existing fastener standards or specifications. The document also provides requirements and test procedures for self-locking fasteners including those manufactured by the installing activity.

This document also provides requirements for the selection and use of fastener lubricants, additional corrosion protection treatments, fastener tightening procedures, and the use of thread-locking compounds.

Standard

Ship Systems and Equipment - Threaded Fasteners - Inspection, Test, and Installation Guidance

2016-06-30

CURRENT

J2270_201606

This SAE Standard covers both quality assurance and installation requirements for fasteners. This document establishes engineering criteria and guidance for quality assurance requirements (including Test and Inspection) for procurement of threaded fasteners where such criteria and guidance is not otherwise provided by existing fastener standards or specifications. The document also provides requirements and test procedures for self-locking fasteners including those manufactured by the installing activity. This document also provides requirements for the selection and use of fastener lubricants, additional corrosion protection treatments, fastener tightening procedures, and the use of thread-locking compounds.

Standard

Ship Systems and Equipment - Part Standard for Studs - Continuous and Double End (Inch Series)

2004-06-21

HISTORICAL

J2271_200406

Standard

Ship Systems and Equipment - Fasteners - Selection and Identification Guidance

2021-12-01

CURRENT

J2280_202112

This SAE Standard provides a comprehensive list of guidelines for the selection, identification, and control of metric- and inch-sized fasteners for use in shipboard applications for both shipbuilder installed joints and for use in shipboard components. This guidance includes the following: a Fastener material selection. b Fastener thread form and fit selection. c Selection of fastener finish, when needed. d Selection of locking devices and elements, when needed. e Selection of screw thread fastener inserts, when needed. f Use of fastener part or identifying numbers. g Identification marking requirements.

Standard

SHIP SYSTEMS AND EQUIPMENT—THREADED FASTENERS—INSPECTION, TEST, AND INSTALLATION REQUIREMENTS

1996-01-01

HISTORICAL

J2270_199601

This SAE Standard covers both quality assurance and installation requirements for fasteners. This document establishes engineering criteria and guidance for quality assurance requirements (including Test and Inspection) for procurement of threaded fasteners where such criteria and guidance is not otherwise provided by existing fastener standards or specifications. The document also provides requirements and test procedures for self-locking fasteners including those manufactured by the installing activity. This document also provides requirements for the selection and use of fastener lubricants, additional corrosion protection treatments, fastener tightening procedures, and the use of thread-locking compounds.

Standard

Fasteners—Part Standard—Cap Screws, Hex Bolts, and Hex Nuts (Metric)

2006-06-21

HISTORICAL

J2295M_200606

This SAE Part Standard covers selected metric screws, hex bolts, and nuts manufactured in accordance with American Society for Testing and Materials (ASTM) and SAE fastener standards. This document covers fastener materials often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This document permits the fasteners to be identified and ordered by a part or identifying number (PIN) as defined in this document.

Standard

Fasteners - Part Standard - Cap Screws, Hex Bolts, and Hex Nuts (Metric)

2019-05-10

CURRENT

J2295M_201905

This SAE Part Standard covers selected metric screws, hex bolts, and nuts manufactured in accordance with American Society for Testing and Materials (ASTM) and SAE fastener standards. This document covers fastener materials often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This document permits the fasteners to be identified and ordered by a part or identifying number (PIN) as defined in this document.

Standard

Fastener Part Standard—Washers and Lockwashers (Inch Dimensioned)

2003-09-15

HISTORICAL

J2655_200309

This SAE Part Standard covers selected inch dimensioned washers and lock washers manufactured in accordance with American Society for Mechanical Engineers dimensional standards. This SAE standard covers material most often used in ship systems and equipment but its use may be applied wherever washers of the covered materials are used. This standard permits the washers to be identified and ordered by a part or identifying number (PIN) as defined in this standard.

Standard

Fastener Part Standard—Tapping Screws and Metallic Drive Screws (Inch Dimensioned)

2004-10-25

HISTORICAL

J2596_200410

This SAE Part Standard covers selected inch dimensioned tapping screws and metallic drive screws manufactured in accordance with American Society for Mechanical Engineers dimensional standards. This SAE standard covers material most often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This standard permits the fasteners to be identified and ordered by a part or identifying number (PIN) as defined in this standard.

Standard

Fastener Part Standard—Machine Screws

2002-07-12

HISTORICAL

J2484_200207

This SAE Part Standard covers selected machine screws manufactured in accordance with American Society for Mechanical Engineers dimensional standards. This SAE standard covers material most often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This document permits the fasteners to be identified and ordered by a part or identifying number (PIN) as defined in this document.

Standard

Fastener Part Standard—Hexagon Socket, Square Head, and Slotted Headless Set Screws—Inch Dimensioned

2010-01-07

HISTORICAL

J2656_201001

This SAE Part Standard covers selected inch dimensioned set screws manufactured in accordance with American Society for Mechanical Engineers dimensional standards. This SAE standard covers material most often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This standard permits the fasteners to be identified and ordered by a part identification number (PIN) as defined in this document.

Standard

Fastener Part Standard—Caps Screws, Hex Bolts, and Hex Nuts (inch Dimensioned)

2004-04-01

HISTORICAL

J2295_200404

This SAE Part Standard covers selected inch screws, hex bolts, and nuts manufactured in accordance with SAE and American Society for Testing and Materials (ASTM) fastener standards. This document covers fastener materials often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This document permits the fasteners to be identified and ordered by a part or identifying number (PIN) as defined in this document.

Standard

Fastener Part Standard—Cap Screws, Hex Bolts, and Hex Nuts (Inch Dimensioned)

2006-05-16

HISTORICAL

J2295_200605

This SAE Part Standard covers selected inch screws, hex bolts, and nuts manufactured in accordance with SAE and American Society for Testing and Materials (ASTM) fastener standards. Appendix A covers bolt blanks to manufacture fitted bolts of specific materials. This document covers fastener materials often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This document permits the fasteners to be identified and ordered by a part or identifying number (PIN) as defined in this document.

Standard

Fastener Part Standard - Washers and Lockwashers (Inch Dimensioned)

2015-09-22

CURRENT

J2655_201509

This SAE Part Standard covers selected inch dimensioned washers and lock washers manufactured in accordance with American Society for Mechanical Engineers dimensional standards. This SAE standard covers material most often used in ship systems and equipment but its use may be applied wherever washers of the covered materials are used. This standard permits the washers to be identified and ordered by a part identification number (PIN) as defined in this standard. Appendix A provides a means of establishing PINs for non-standard flat washers. Appendix B establishes standards for lock plates and tab lock washers often used in Navy designs. Appendix C identifies other military and non-government standards for flat washers, helical and toothed lock washers. It identifies the materials covered by each standard with a comparison of those dimensions with those SAE J2655 washers.

Standard

Fastener Part Standard - Tapping Screws and Metallic Drive Screws (Inch Dimensioned)

2013-08-21

CURRENT

J2596_201308

This SAE Part Standard covers selected inch dimensioned tapping screws and metallic drive screws manufactured in accordance with American Society for Mechanical Engineers dimensional standards. This SAE standard covers material most often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This standard permits the fasteners to be identified and ordered by a Part Identification Number (PIN) as defined in this standard.