Search Results

The stringent emissions regulations, notably for cold start, have led to design modifications in each of the converter components, notably the catalyst support. With the faster light–off requirement, the catalyst support must have a lower thermal mass so as to reach the 50% conversion temperature as quickly as possible. Simultaneously, for higher warmed–up efficiency, the catalyst support must offer higher geometric surface area. Similarly, for improved fuel economy and for preserving engine power, the catalyst support must exert lower back pressure. Indeed, these three performance requirements might be met by certain thin wall ceramic substrates, including 400/4.5 and 600/4.3, which have 22% lower thermal mass, 25% higher geometric surface area and 8% larger open frontal area than the standard 400/6.5 substrate. Testing by automakers and international laboratories on engine dynamometers has verified the above advantages of thin wall substrates.

Thermal stresses constitute a major portion of the total stress which the ceramic wall flow filter experiences in service. The primary source of these stresses is the temperature gradients, both in radial and axial directions, which attain their maximum values during regeneration. The level of particulate loading, the flow rate, the filter size and the mounting design govern the severity of temperature gradients which, together with physical properties and aspect ratio of the filter, dictate the magnitude and distribution of thermal stresses. The filter, the mounting, and the regeneration conditions should be so designed as to minimize these stresses to insure reliable and fracture free performance of the filter throughout the lifetime of the vehicle. In this paper we present a thermal stress model, based on finite element method, which computes stresses in the axisymmetric filter subjected to linear or step temperature gradients in radial and axial directions.

The long term durability of a heavy duty gasoline truck converter is addressed by examining thermal stresses due to radial temperature gradients under three different driving schedules. The pertinent physical properties of a catalyzed cordierite ceramic converter, with triangular cell structure, are first measured as function of temperature. These are followed by thermal mapping of mid-bed temperatures with the aid of thermocouples under various driving cycles on the truck dynamometer. Both the physical properties and the temperature distribution are then used as input parameters in the finite element thermal stress model to compute stresses in the oval converter.

The thermal durability of a large frontal area cordierite ceramic wall-flow filter for light-duty diesel engine is examined under various regeneration conditions. The radial temperature distribution during burner regeneration, obtained by eight different thermocouples at six different axial sections of a 75″ diameter x 8″ long filter, is used together with physical properties of the filter to compute thermal stresses via finite element analysis. The stress-time history of the filter is then compared with the strength and fatigue characteristics of extruded cordierite ceramic monolith. The successful performance of the filter over as many as 1000 regenerations is attributed to three important design parameters, namely unique filter properties, controlled regeneration conditions, and optimum packaging design. The latter induces significant radial and axial compression in the filter thereby enhancing its strength and reducing the operating stresses.

This paper addresses the packaging design for monolithic cordierite ceramic converters to meet the new, stringent durability requirements of the 1990's, while minimizing warranty cost for the automaker. These objectives are best met by using a systems approach during the early phases of packaging design, i.e. by examining design interactions between the ceramic monolith, alumina coating, ceramic mat or wiremesh mounting material with seals, stainless steel can, heatshields, and associated peripheral components. Failure of any one of these components can prove detrimental to converter durability. In this paper we take advantage of overall understanding of the observed failure modes and individual component behavior, and present new data for optimizing the total converter durability through initial design. In particular, the impact of symmetric gas entry, monolith contour, clamshell anisotropy, mount density, stiffener ribs, and heatshield insulation on total durability is highlighted.

Stringent emissions standards for HC, CO and NOx have necessitated the development of thin wall ceramic substrates which offer higher surface area, larger open frontal area and lower thermal mass. Such substrates offer the additional benefit of being compact which make them ideal for manifold mounting in the engine compartment. These attributes of ceramic substrates, following washcoat and catalyst application, translate directly into quick light-off, high conversion efficiency and low back pressure. To preserve these advantages at high operating temperature and still meet 100,000 mile vehicle durability, the thermomechanical interaction between the substrate and thin wall washcoat system must be managed carefully via formulation, % loading and the calcination process. This paper presents the physical properties data for thin wall ceramic substrates before and after the washcoat application.

The physical properties, including modulus of rupture, structural modulus and thermal expansion coefficient of segmented, large frontal area, ceramic wall-flow diesel filters are presented. The effect of cement composition, its coverage and segmentation pattern on these properties and on the failure modes during strength testing is discussed. Using these properties the mechanical and thermal integrities of LFA filter are computed and compared with those of monolithic filter,. The paper discusses both the high efficiency (EX-47, 100/17) and low efficiency (EX-66, 100/25) filter compositions.

The 290,000 vehicle-mile durability requirement for diesel/natural gas oxidation catalysts calls for robust packaging systems which ensure a positive mounting pressure on the ceramic flow-through converter under all operating conditions. New data for substrate/washcoat interaction, intumescent mat performance in dry and wet states, and high temperature strength and oxidation resistance of stainless steels, and canning techniques insensitive to tolerance stack-up are reviewed which help optimize packaging durability. Factors contributing to robustness of converter components are identified and methods to quantify their impact on design optimization are described. CERAMIC FLOW-THROUGH catalysts for diesel exhaust aftertreatment have met with much success since their introduction in 1993.

Significant advances in composition and the manufacturing process have led to thin wall cordierite ceramic substrates with low thermal mass, high surface area, and large open frontal area-properties that are critical for fast light-off, high conversion efficiency and low back pressure. Indeed, such substrates are ideal catalyst supports for meeting the ever-stringent emissions regulations, ala SULEV and ULEV, as demonstrated by recent performance data1. This paper focuses on the physical durability of 400/4 and 600/4 cordierite ceramic substrates. In particular, it presents strength, fatigue, and modulus data which influence the mechanical durability. In addition, it presents thermal expansion data which impact the thermal durability. Both of these durabilities are examined as a function of operating temperature.

The substrate/washcoat systems which preserve both the mechanical and thermal attributes of cordierite substrates are most desirable for prolonged durability of automotive catalysts. This paper provides a micromechanics viewpoint of substrate/washcoat composite whose properties are predictable, measurable and relevant to catalyst durability. The micromechanics model helps quantify substrate/washcoat interaction which controls the long-term catalyst performance. Three different examples of substrate/washcoat systems are used here to illustrate the optimization process during the development of new substrates or washcoat technologies to meet the more stringent emission and durability requirements of advanced catalysts for the 1990s.

The emissions regulations for the decade of 1990s are not only more stringent but are also required of vehicles other than passenger cars, for example both diesel and gasoline trucks as well as motorcycles. These latter applications involve different operating conditions in terms of space velocities, temperature profiles, and vibrational loads than those typical of passenger cars [1]*. In addition, the performance and durability requirements for these applications call for lower back pressure and longer service life. Furthermore, the space availability and the operating temperature range differ vastly so as to require special packaging designs to meet the durability requirements. This paper provides new data for ceramic insulating mats, both intumescent and non-intumescent [2,3], and ceramic substrates with thin and thick walls and square and triangular cell geometries [4], which are under development for non-passenger car applications indicated above.

The converter assembly consists of a ceramic monolith with racetrack cross-section, a suitable “springy” mat wrapped around it and a clam-shell steel can to contain and guard these components against road hazards. The process to effect this assembly is rather dynamic and introduces directional loads onto the monolith in view of the anisotropic stiffness of the can. If these loads exceed certain values, they may cause failure of the monolith either by crushing it or by shearing it. In this paper we analyze the stiffness of various components of converter assembly, determine the load distribution around the monolith, and modify the design of can and monolith to make the load distribution more favorable. It is concluded that the converter assembly can be optimized and the failure of monoliths, if any, eliminated during closure. The present monoliths do not suffer from such failure.

Ceramic honeycomb structures have been used successfully as catalyst supports in gasoline-powered vehicles for the past ten years. They are currently the leading candidate for trapping and oxidizing the carbonaceous particulate emissions in diesel-powered vehicles. In both of these applications the long term durability of the ceramic substrate is of prime importance. This, in turn, depends on the physical properties of cellular structure, cyclic nature of service loads and design of the mounting assembly. This paper examines the nature and dependence of both the mechanical and thermal stresses in the substrate on its geometry, properties, mounting parameters, and the operating conditions. It also compares the observed failure modes with those predicted by the theory. The paper concludes with a set of recommendations for optimal systems design and acceptable operating conditions which will promote the long term durability of the ceramic substrate.

The isostatic strength of porous cordierite ceramic monoliths plays an important role during canning and subsequent operation of automotive catalysts. Its value depends on wall porosity, cell geometry, skin thickness and morphology, monolith size and contour, and substrate/washcoat interaction. If the stresses induced by canning loads and closure speeds exceed the isostatic strength, the monolith may exhibit either crushing or shear type failure. This paper presents the room temperature isostatic strength data for coated and uncoated ceramic monoliths of different contour, size, and cell geometry. The applied isostatic load on the monolith is translated into stresses in the porous cell wall using both an analytical model and finite element analysis. It is found that the failure criteria are governed by the fundamental tensile and compressive strengths of the cell wall.

The dual requirement of high conversion efficiency and 50K mile durability for cordierite ceramic converters is achievable through optimization of washcoat and catalyst formulation. This paper presents new data for high temperature physical properties, light-off performance, conversion efficiency and pressure drop through an oval cordierite ceramic converter with triangular cell structure and two different washcoat formulations; namely standard vs high-tech. Both of the washcoat systems have a beneficial effect on strength properties with nominal impact on thermal shock resistance. Both the standard and high-tech catalysts provide identical light-off performance for CO, HC and NOx conversion. The high-tech washcoat and catalyst system, in particular, provides consistently superior conversion efficiency for CO, HC and NOx. The pressure drop across the catalyst depends on hydraulic diameter and is only 8% higher for high-tech washcoat than for standard washcoat.

The high temperature dynamic fatigue data for the catalyst support composition, EX-20, 400/6.8, are presented. These data indicate that the fatigue effects are more severe when the substrate temperature in the peripheral region is near 200°C. The major impact of high temperature fatigue is the slow degradation of substrate’s initial strength while in service. Such a degradation must be taken into account in designing the total converter package to meet life requirements. For the EX-20, 400/6.8 substrate, approximately 50% of its initial strength is available to withstand the combined stresses from mechanical, thermal, and vibrational loads in service. At temperatures well above 200°C, the available design strength can be as high as 65% of substrate’s initial strength. The fatigue theory, the measurement technique, and the application of fatigue data to long term durability of cordierite substrates are discussed.

The high temperature creep data for radial specimens, cut from metal and ceramic substrates and subjected to compressive loads representative of mounting and thermal pressure are presented as function of load and temperature. These data show that the creep resistance of metallic specimens under sustained loading varies with temperature and is orders of magnitude lower than that of ceramic specimens. The observed creep deformation in metallic specimens reduces their open frontal area and hydraulic diameter with potentially adverse impact on pressure drop across the metallic substrate.

High temperature modulus of rupture (MOR) data, published previously, show that the ceramic catalyst supports get stronger with temperature due to the absence of water vapor and closure of microcracks which would otherwise act as stress concentrators [1, 2 and 3]*. The increased MOR value is partially responsible for the excellent durability of ceramic catalyst supports at high temperature. In this paper, we will present the compressive strength data of ceramic substrates at high temperature, namely the crush strength along B-axis and biaxial compressive strength of the whole substrate. Since the honeycomb strength is directly related to that of the individual cell wall, the compressive strength should also increase with temperature similar to the modulus of rupture. Accordingly, the ceramic substrates are capable of supporting higher mounting pressures exerted by the intumescent mat at high temperature [4].

An approximate analytical solution for stress distribution in the rectangular lens of a glass headlamp due to static and impact loading is presented. Both low mass/high velocity and high mass/low velocity impact data and the resulting failure modes are discussed. Generally, glass headlamp lenses break either due to Hertz stress (front surface under high localized tension), or due to flexural stress (back surface under tension due to bending), or the combination of two. Failure due to flexural stress is illustrated by a star-crack, while that due to Hertz stress is illustrated by a Hertzian cone or “bullet hole” in the lens. The failure mode during low mass/high velocity impact is predominantly Hertzian while that during high mass/low velocity impact is flexural for lenses 0.120″ to 0.150′ thick. No significant differences are observed in the impact resistance of standard and light-weight lenses in this thickness range.

Tempered float glass is commonly used for both side windows and backlites in the automotive industry. The success of such products is primarily attributed to high level of residual compression, following tempering, which provides abrasion resistance as well as 3X higher functional strength to sustain mechanical, vibrational and thermal stresses during the vehicle's lifetime. Certain applications of tempered glass, however, require mounting holes whose surface-finish must be controlled carefully to withstand transient tensile stresses during tempering. Simultaneously, the nature and magnitude of residual compression at the hole must provide sufficient robustness to bear mounting, vibrational and thermal stresses throughout the life of the vehicle. This paper presents (i) analysis of residual compression at the hole, (ii) measurement of biaxial strength of annealed glass with hole at center, and (iii) measurement of biaxial strength of tempered glass with hole at center.