Search Results

Standard

Ø SIZE CLASSIFICATION AND CHARACTERISTICS OF GLASS BEADS FOR PEENING

1988-09-01

HISTORICAL

J1173_198809

This specification covers the characteristics of glass beads used for peening, and provides for standard glass bead size numbers.

Standard

Ø SIZE CLASSIFICATION AND CHARACTERISTICS OF GLASS BEADS FOR PEENING

2019-05-03

CURRENT

J1173_201905

This specification covers the characteristics of glass beads used for peening, and provides for standard glass bead size numbers.

Standard

Test Strip, Holder, and Gage for Shot Peening

2001-12-10

HISTORICAL

J442_200112

This SAE Standard defines requirements for equipment/supplies to be used in measuring shot peening intensity. Guidelines for the use of these articles (test strip, holding fixture, and gage) are also included.

Standard

Test Strip, Holder, and Gage for Shot Peening

2008-11-24

HISTORICAL

J442_200811

This SAE Standard defines requirements for equipment/supplies to be used in measuring shot peening intensity. Guidelines for the use of these articles (test strip, holding fixture, and gage) are also included.

Standard

Test Strip, Holder, and Gage for Shot Peening

2006-05-22

HISTORICAL

J442_200605

This SAE Standard defines requirements for equipment/supplies to be used in measuring shot peening intensity. Guidelines for the use of these articles (test strip, holding fixture, and gage) are also included.

Standard

TEST STRIP, HOLDER, AND GAGE FOR SHOT PEENING

1995-01-01

HISTORICAL

J442_199501

This SAE Standard defines requirements for equipment/supplies to be used in measuring shot peening intensity. Guidelines for the use of these articles (test strip, holding fixture, and gage) are also included.

Standard

TEST STRIP, HOLDER AND GAGE FOR SHOT PEENING

1977-11-01

HISTORICAL

J442A_197711

Standard

TEST STRIP, HOLDER AND CAGE FOR SHOT PEENING

1979-08-01

HISTORICAL

J442_197908

Standard

Surface Texture Control

2011-08-04

CURRENT

J449_201108

SAE J448, Surface Texture, has been set up for precision reference specimens using a controlled surface profile to obtain reproducible roughness values. These specimens are for instrument calibration. Appropriate symbols for roughness, waviness, and lay have also been standardized (ASA B46.1-1962 and SAE J448). For production control, especially from one geographical location to another, means are required to facilitate the inspection of surface characteristics called for by specifications which include not only roughness but profile waviness and lay. In order to integrate the requirements of the designer with the actual production of surfaces, a second grade of control standards must be adopted which will be functional in nature for the specific product being manufactured. These control standards may be Calibrated Pilot Specimens (actual parts with satisfactory texture) or Roughness Comparison Specimens (ASA B46.1-1962).

Standard

Surface Rolling and Other Methods for Mechanical Prestressing of Metals

2017-06-07

CURRENT

J811_201706

Standard

Specifications for Low Carbon Cast Steel Shot

2021-07-07

CURRENT

J2175_202107

This SAE Recommended Practice describes chemical analysis, hardness, microstructure, and physical characteristic requirements for low carbon cast steel shot to be used for shot peening or blast cleaning operations.

Standard

Specifications for Low Carbon Cast Steel Shot

2015-06-18

HISTORICAL

J2175_201506

This SAE Recommended Practice describes chemical analysis, hardness, microstructure, and physical characteristic requirements for low carbon cast steel shot to be used for shot peening or blast cleaning operations.

Standard

Size Classification and Characteristics of Ceramic Shot for Peening

2023-10-13

CURRENT

J1830_202310

This specification covers characteristics for chemistry, microstructure, density, hardness, size, shape, and appearance of zirconium oxide-based ceramic shot, suitable for peening surfaces of parts by impingement.

Standard

Size Classification and Characteristics of Ceramic Shot for Peening

2013-10-16

HISTORICAL

J1830_201310

This specification covers characteristics for chemistry, microstructure, density, hardness, size, shape and appearance of zirconium oxide based ceramic shot, suitable for peening surfaces of parts by impingement.

Standard

Shot Peening Coverage Determination

2023-01-13

CURRENT

J2277_202301

This SAE Recommended Practice provides procedures for determining shot peening coverage and relating coverage to part exposure to the media stream. Effectiveness of shot peening is directly dependent on coverage. Inadequate or excessive coverage can be detrimental to fatigue strength and component life.

Standard

SURFACE TEXTURE CONTROL

1963-06-01

HISTORICAL

J449_196306

SAE J448, Surface Texture, has been set up for precision reference specimens using a controlled surface profile to obtain reproducible roughness values. These specimens are for instrument calibration. Appropriate symbols for roughness, waviness, and lay have also been standardized (ASA B46.1-1962 and SAE J448). For production control, especially from one geographical location to another, means are required to facilitate the inspection of surface characteristics called for by specifications which include not only roughness but profile waviness and lay. In order to integrate the requirements of the designer with the actual production of surfaces, a second grade of control standards must be adopted which will be functional in nature for the specific product being manufactured. These control standards may be Calibrated Pilot Specimens (actual parts with satisfactory texture) or Roughness Comparison Specimens (ASA B46.1-1962).

Standard

SURFACE TEXTURE CONTROL

1963-06-01

HISTORICAL

J449A_196306

SAE J448, Surface Texture, has been set up for precision reference specimens using a controlled surface profile to obtain reproducible roughness values. These specimens are for instrument calibration. Appropriate symbols for roughness, waviness, and lay have also been standardized (ASA B46.1-1962 and SAE J448). For production control, especially from one geographical location to another, means are required to facilitate the inspection of surface characteristics called for by specifications which include not only roughness but profile waviness and lay. In order to integrate the requirements of the designer with the actual production of surfaces, a second grade of control standards must be adopted which will be functional in nature for the specific product being manufactured. These control standards may be Calibrated Pilot Specimens (actual parts with satisfactory texture) or Roughness Comparison Specimens (ASA B46.1-1962).

Standard

SURFACE ROLLING AND OTHER METHODS FOR MECHANICAL PRESTRESSING OF METALS

1981-08-01

HISTORICAL

J811_198108

Standard

SAE Manual on Shot Peening

1967-11-01

HISTORICAL

J808A_196711

This report is intended to provide users and producers of metallic shot and grit1 with general information on methods of mechanically testing metal abrasives in the laboratory.

Standard

Procedures for Using Standard Shot Peening Test Strip

2003-01-09

HISTORICAL

J443_200301

This SAE Recommended Practice provides uniform procedures for using the standard shot peening test strips reported in SAE J442. Standard test strips are used to establish saturation, determine intensity, monitor repeatability of the shot peening machine operations, and can be used to predict a desired result on a part. It is recommended that the standard test strip A be used for intensities that produce arc heights of 0.10mm A (0.004 inch A) to 0.60 mm A (0.024 inch A). For intensities below 0.10 mm A (0.004 inch A), the standard N strip is recommended, and for intensities above 0.60 mm A (0.024 inch A), the standard C strip is recommended. The process of shot peening, in common with many other processes, cannot at present be adequately controlled by nondestructive inspection of the peened parts, therefore, it is necessary to control the process itself to achieve consistent, reliable results.