Search Results

With the trend of electric drive unit gradually replacing ICE powertrain, in additional to gear noise, the motor noise has become a new major NVH challenge. These tonal noises are easier to be detected in the pure electric vehicle that has no masking effect of ICE powertrain. Therefore, how to accurately predict and reduce the motor noise is a key to solve the problem. The accuracy of calculated motor stator modes determines the accuracy of motor noise prediction. This paper presents a simulation method based on the finite element model and defined orthotropic material properties of the stator. The material property parameters of the stator core and hairpin windings are reverse-engineered through iterative correlations to test data. High accuracy FEA model is achieved that can determine the stator mode shapes and frequencies of this hairpin motor accurately, which provides a reliable and effective approach for the motor noise prediction and optimization studies.

This paper presents the principles of robustness design of axle system dynamics to reduce vehicle system related axle gear whine. Through examining the physics of the axle gear noise, the influence of the system dynamics are identified as two parts, i.e., the dynamics mesh force generated at the gear meshing per unit gear mesh motion variation; and the force transmissibility from mesh to the axle housing, and then further to the bracket attachments. The noise sensitive design parameters are identified and discussed. Component design requirements are proposed to minimize the system resonances in the typical gear mesh frequency range. The use of FEA models for system understanding and further design tuning is illustrated.

This paper discusses approaches to properly design aluminum axles for optimized NVH characteristics. By effectively using well established and validated FEA and other CAE tools, key factors that are particularly associated with aluminum axles are analyzed and discussed. These key factors include carrier geometry optimization, bearing optimization, gear design and development, and driveline system dynamics design and integration. Examples are provided to illustrate the level of contribution from each main factor as well as their design space and limitations. Results show that an aluminum axle can be properly engineered to achieve robust NVH performances in terms of operating temperature and axle loads.

For any combustion engine, balance has always been important regardless of types of cylinder layout. One of the disadvantages of the inline four engines is the second-order unbalanced forces, which leads to high-frequency excitation of vehicle’s structure and consequent internal noise. Balance shaft modules (BSM) are often used in inline-four engines, to reduce the second-order vibration and mitigate engine imbalance. Balance shafts are often running at light load and high-speed condition which could induce both gear rattle and gear whine from the BSM gear set. Typically, scissor gear set is used between crankshaft and BSM to reduce the gear rattle noise. However, a poor scissor gear design could easily lead to unpleasant gear whine noise. There is an increasing trend to shorten development cycles and reduce cost using simulation models. This paper discusses an analytical method to simulate gear whine and rattle generated by engine BSM.

The need for improved axle NVH integration has increased significantly in recent years with industry trends toward full-time and automatic four wheel drive (4wd) systems. Along with seamless 4wd operation, quiet performance has become a universal expectation. Axle gear-mesh noise can be transmitted to the vehicle passenger compartment through airborne paths (not discussed in this paper) and structure-borne paths (the focus of this paper.) A variety of mounting configurations are used in an attempt to provide improved axle isolation and reduce structure-borne transmission of gear-mesh noise. The configuration discussed in this paper is a 4-point vertical mount design for an Independent Front Drive Axle (IFDA). A significant benefit of this configuration is improved isolation in the range of drive torques where axle-related NVH issues typically exist.

Axle gear whine originates at the hypoid gearset, and can be amplified by the driveline system dynamics as well as the transfer paths into the vehicle. In addition to tremendous efforts in improving the gear quality, it is of some importance that optimized system dynamics be achieved so that the system sensitivity to the gear excitation can be greatly reduced. This methodology has been extensively utilized in American Axle through a combined numerical simulation (FEA) and testing approach. This paper presents the FEA modeling techniques in studying axle system dynamics and the level of accuracy of the model that can be achieved in predicting forced system responses. The use of a driveline system model in the development of a design optimization for total system NVH performance is discussed. Examples are provided to demonstrate the effects of modal alignments and appropriate system tuning.

Today's emerging 4-wheel-drive and all-wheel-drive vehicle architectures have presented new challenges to engineers in achieving low driveline system noise. In the meantime there's also a constant pressure from increasingly stringent noise level requirements. A driveline system's NVH (noise, vibration and harshness) performance is controlled by various noise sources and mechanisms. The common noise issues include the axle gear whine, driveline imbalance/run-out, 2nd order kinematics, engine torque fluctuation, engine idle shake etc. Unfortunately various design alternatives may improve some NVH performance attributes while degrading others. It is important to balance the requirements for these noise sources to achieve an optimized driveline system NVH. However, very little literature is found on this topic. In this paper, discussions on methodologies in balancing these different driveline NVH requirements are presented.

The installation of various liners into the propeller shaft tube is a traditional driveline NVH treatment to attenuate driveline vibration. The most commonly used liners include rolled paper, C-cut cardboard, corrugated cardboard, etc. These traditional liner treatments are expected to provide damping to the driveline system to reduce the vibration levels. However their added level of damping and effectiveness to the driveline system are limited, particularly when dealing with driveline gear mesh vibration and noise. This paper presents a novel type of liner treatment - tunable liners. The liner is designed such that it functions as a tuned dynamic vibration absorber. Through proper design of the liner, it can be tuned for bending and torsion modes at the same time. The liner design parameters and their impact on the frequency tuning are analyzed and studied through both physical testing and FEA analysis.