Search Results

Article

Zwick Roell provides flexible materials testing over a wide temperature range

2018-10-19

To enable the tests required for development work to be performed with maximum efficiency, the Zwick Roell Group (ZwickRoell) – a global supplier of materials testing machines based out of Ulm, Germany – developed a materials testing machine that can be equipped with both a temperature chamber and a high-temperature furnace.

Article

U.K. Space Agency partners with industry to advance spaceflight program

2018-07-16

U.K. Space Agency officials in Swindon, England, are partnering with Lockheed Martin in Bethesda, Md., to execute several strategic projects to support the U.K. Spaceflight Program, with a goal of building its first commercial spaceport in Scotland and achieving its first vertical space launch in the early 2020s.

Article

Soft tests for autonomous vehicles

2018-03-15

Statistics may point to human fallibility being the cause of almost all road accidents, but the switch to a connected robotic environment must ultimately deliver every nano-second of every day on the promise of a guaranteed near-total safety highway environment. Today’s grudging acceptance by the global public of the inevitability of deaths and injuries on the road will not continue in a driverless environment.

Article

Sensuron enables real-time structural health monitoring onboard NASA’s X-56 UAV

2019-04-04

In contrast to the stiff, rigid wings found on most commercial aircraft, flexible wing technology is considered essential to next generation, fuel efficient aircraft. However, flexible wings are susceptible to “flutter,” or highly destructive aeroelastic instability. To better understand and mitigate flutter, engineers at NASA’s Armstrong Flight Research Center (AFRC) equipped the X-56 with fiber optic sensing (FOS) technology.

Article

SAE rolls out classroom version of Introduction to Automated Vehicle Safety in Shanghai

2019-06-03

Designing for safety in automated vehicles has complex requirements – many of which are surrounded with misconceptions. As the leader for training mobility engineers, SAE is providing a two-day classroom seminar: Introduction to Automated Vehicle Safety: Multi-Agent, Functional Safety, and SOTIF.

Article

Orbex debuts innovative smallsat launch vehicle

2019-02-20

Orbex, a developer of small satellite (smallsat) launch vehicles based in Forres, Scotland, has unveiled its “Prime” launch vehicle. The rocket utilizes several novel technologies, including the world’s largest metal rocket engine produced as a single piece through additive manufacturing (AM).

Article

OmegA rocket sustains explosion during first static test, Northrop Grumman maintains test was a success

2019-05-31

Although Northrop Grumman officials acknowledged during a post-test press conference that the incident needs to be “looked into,” they stated that the thrust profile could be “very normal, nominal.” A following statement labeled the test a success and announced that OmegA is on track for its first test launch in 2021 and operational service in 2022.

Article

ONERA and DLR shake up the Airbus Beluga XL cargo aircraft a shake-up

2018-06-14

On June 6, a joint team from ONERA – internationally known as “The French Aerospace Lab” – and Germany’s DLR completed an eight-day course of static ground vibration testing on the new model.

Article

Northrop Grumman launches rocket motor production at modernized tactical motor manufacturing facility

2019-03-05

Northrop Grumman Corp. has started producing rocket motors at its new, modernized tactical motor manufacturing facility at the Allegany Ballistics Laboratory (ABL) in West Virginia. Read more in the Advanced Manufacturing Knowledge Hub on SAE MOBILUS.

Article

NASA selects Frontier Aerospace to continue development of new deep space thruster

2018-08-24

NASA’s Space Technology and Mission Directorate awarded Frontier Aerospace with “Tipping Point” funding to qualify Frontier’s Deep Space Engine (DSE) for flight. The compact and lightweight design of the 100-pound force DSE thruster will enable future development of smaller and less expensive spacecraft propulsion systems due to the lower temperature freezing characteristics of its particular propellant.

Article

NASA budget amendment to help send Americans to moon by 2024, then Mars

2019-05-15

An amended NASA budget for fiscal year 2020 would add $1.6 billion to a $21 billion initial budget request and fund deep space exploration, science, and technology initiatives. An acquisition approach to various projects would present significant opportunities for commercial partners and, likely, the entire aerospace supply chain.

Article

MTSI’s latest project gives fixed-wing aircraft vertical cargo lift capabilities

2019-06-21

The Rapid Aerial Extraction System (RAES) pod is a self-contained device that can attach to an ordnance pylon on any fixed-wing aircraft and enable it to provide vertical lift recovery capability like that of a helicopter.

Article

Lockheed Martin validates heatshield for the Mars 2020 rover mission

2019-05-07

Lockheed Martin Corporation successfully completed development and testing for the heatshield that will protect NASA Jet Propulsion Laboratory Mars 2020 rover during its descent to the Martian surface. After completing the flight hardware structure, Lockheed Martin tested the heatshield’s physical integrity by exposing it to ‘flight-like’ thermal conditions.

Article

Lockheed Martin announces latest hypersonic progress at Le Bourget

2019-06-17

Lockheed Martin successfully flight tested the AGM-183A Air-Launched Rapid Response Weapon (ARRW) on a U.S. Air Force Boeing B-52 Stratofortress. The captive carry flight – announced during the 2019 International Paris Air Show – marks Lockheed Martin’s most recent demonstration of hypersonic technology development.

Article

Jeff Bezos lays out Blue Origin’s moon shot, debuts lunar lander

2019-05-13

According to the presentation, the cargo variant of the Blue Moon lander can carry 3.6 metric tons to the lunar surface. Another lander variant could potentially stretch to be capable of carrying a 6.5-metric-ton, human-rated ascent stage.

Article

Japan signs on for second Boeing KC-46 military tanker and transport aircraft

2018-12-10

Japan officials continue to boost the country’s defenses against threats, exercising the option to add a second Boeing KC-46 Pegasus military aerial refueling and strategic military transport aircraft, based on the Boeing 767 commercial passenger jet, to the Japan Air Self-Defense Force’s fleet of aircraft.

Article

JAXA launches HTV7 unmanned cargo spacecraft on resupply mission to ISS

2018-09-25

The Japan Aerospace Exploration Agency (JAXA) H-IIB Launch Vehicle No. 7 lifted off from the Tanegashima Space Center in Japan at 2:54:27 Japan Standard Time (JST) on September 23, carrying the KOUNOTORI7 (HTV7) cargo transporter into orbit to start its journey to the International Space Station (ISS).

Article

Horiba expands virtual AV vetting with physical body testing

2021-12-02

Horiba expands virtual AV vetting with physical body testing

Article

GKN Aerospace to develop first additive-manufactured rocket engine turbines in Europe for Prometheus project

2018-09-05

GKN Aerospace in Trollhättan, Sweden, are developing and manufacturing the first additive-manufactured, or 3D-printed, rocket engine turbines in Europe, officials say. The tier 1 aerospace supplier is harnessing cutting-edge additive manufacturing (AM) technology to produce two full-scale turbines for the Prometheus reusable rocket engine demonstrator on liquid oxygen and methane propellants, while reducing the number of parts from more than 100 to 2 and cutting costs by 90 percent.

Article

Fokker uses ZwickRoell creep testing machines to test for hydrogen embrittlement on landing gear components

2018-10-17

Aerospace manufacturers walk a metaphorical balance beam to continually develop and produce stronger, more efficient materials and components, while addressing all potential failure modes. This is true for safety-critical aircraft components like landing gear systems. Fokker Landing Gear B.V./GKN Aerospace recently equipped its mechanical laboratory with three creep testing machines to verify its manufacturing process control of zinc-plated bolts for aircraft landing gear systems.