Search Results

Book

X-By-Wire Automotive Systems

2009-02-18

This book contains 46 papers covering the past ten years (1999-2008) of research on various by-wire systems, looking at the challenges faced by design engineers as traditional hydraulic or mechanical linkages are replaced by electronic control systems. Topics covered include: Architecture and Software Considerations; Brake-By-Wire Systems; Steer-By-Wire Systems; Drive-By-Wire Systems; Communication Networks The book also includes editor Ronald K. Jurgen's introduction "Replacing Hydraulics and Mechanics with Electronics" and a concluding section on future trends in X-By-Wire systems.

Book

Wireless Charging Technology and The Future of Electric Transportation

2015-06-08

Around the world, the major automakers are developing their strategies for conductive and wireless charging technologies, with concerted efforts to establish technical standards on wireless electric vehicle charging, mainly focused on the safety considerations and inter-operability. Wireless Charging Technology and the Future of Electric Transportation covers the current status of wireless power transfer (WPT) technology and its potential applications to the future road and rail transportation systems. Focusing on the applications of WPT technology to electric vehicle charging and the future green transportation field, Wireless Charging Technology and the Future of Electric Transportation was written collaboratively by nine experts in the field, led by Dr. In-Soo Suh, a professor and researcher from the Korean Advanced Institute of Technology (KAIST).

Book

Vehicle Battery Fires: Why They Happen and How They Happen

2017-01-15

Battery Fires: Why They Happen and How They Happen was written to assist those interested in this type of incident understand how automotive fires develop, spread and the damage they cause, using both deductive and inductive reasoning. The main focus of the book resides in looking at differences in failure modes between DC and AC systems, general types of battery and electrical failure modes leading to fire, how to interpret electrical fire, determination of the primary failed part, and other skills the investigating engineer will require to perform technical failure mode analysis. However, some fires have consumed the evidence to the point where a determination cannot be made with any degree of certainty. In this instance, evidence will be quite limited, and the analysis will have its limitations and should be included in the discussion as such. In some cases, a “cause undetermined” report is all the evidence will support.

Book

Ultracapacitor Applications

2011-04-15

Energy storage, and in particular electrical storage of energy, has become a very talked about topic in circles ranging from lay persons, in regard to hybrid and battery electric vehicles, to professionals, and certainly by legislators and energy policy makers. This book takes a critical look at the physical storage of electricity in the devices known collectively as electrochemical capacitors and particularly as ultracapacitors. Its 12 chapters cover ultracapacitor and advanced battery topics with an emphasis on a clear understanding of fundamental principles, models and applications. But even to professionals, the distinctions between physical and chemical forms of electric energy storage are unclear and, at times, poorly understood, if at all. The reader will appreciate the case studies from commercial to industrial to automotive applications of not only ultracapacitors, but of these power dense components in combination with energy dense battery technologies.

Book

Transformations: Selected Works of G.B. Olson on Materials, Microstrucutre, and Design

2017-01-01

ASM International and The Minerals, Metals and Materials Society (TMS) have collaborated to present a collection of the selected works of Dr. Greg B. Olson in honor of his 70th birthday in 2017. This collection highlights his influential contributions to the understanding of martensite transformations and the development and application of a systems design approach to materials. Part I: Martensite, with an Introduction by Sir Harry Bhadeshia, emphasizes Dr. Olson's work to develop a dislocation theory for martensite transformations, to improve the understanding of the statistical nature of martensite nucleation, and to expand use of quantitative microscopy to characterize phase transformations. Part II: Materials Design, with an Introduction by Dr. Charles Kuehmann, focuses on the application of a systems design approach to materials and the development of integrated computational design curriculum for undergraduate education.

Book

The Business of Winning

2007-01-01

Motorsport Valley® is the dynamic motorsport industry cluster of companies whose global influence is as strong as ever. Learn more about the innovative technologies which continue to deliver world-beating success in the outstanding MIA publication - The Business of Winning. In-depth, up-to-the-minute features and case studies fill the full-colour 100-plus pages. The Business of Winning analyses the pioneering ideas, processes and capabilities that characterize Motorsport Valley® and UK high-performance engineering and features exciting images which bring the story to life. The Business of Winning, supported by UK Trade & Investment, focuses on the successful companies that comprise Motorsport Valley and highlights their presence at the forefront of the global motorsport industry. This is THE case-study source for customers, business leaders, researchers, students and fans.

Book

The Automotive Chassis

2001-06-01

This second English edition provides a clearly structured overview of chassis technology, and includes over 400 illustrations relating basic engineering principles to the particular requirements of the chassis of vehicle mechanics. This book is essential reading for component and system engineers in both higher education and industry, as well as for non-specialists who seek an understanding of the field. Additionally, the book now fully conforms to the international standards of ISO 8855 and SAE J670. Topics include: Tires and Wheels Axle Kinematics Vehicle Steering Springing and Damper Systems Four Wheel Drive Technology and more

Book

State-of-the-Art Infrared Detector Technology

2014-01-01

Scientists, engineers, managers, and policy makers who are currently involved in the funding of infrared R&D and subsequent system design and manufacture are confronted with a choice between two competing materials technologies, HgCdTe and III-V alloys. State-of-the-Art Infrared Detector Technology examines both the current and future performance of infrared focal plane arrays that use the various device architectures associated with these two materials technologies. All spectral bands from long wavelength (LWIR) through mid-wavelength (MWIR) to short wavelength (SWIR) are considered, ultimately with a view to achieving background and diffraction-limited system performance at room temperature for all wavelengths.

Book

Safety-Critical Automotive Systems

2006-08-01

Safety-Critical Automotive Systems contains 40 SAE technical papers covering six years (2001-2006) of research on this developing subject. Focus is on the vehicle's most important subsystems: sensors, actuators, electronic control units (ECUs), communication systems, and software (application, middleware, drivers, etc.).

Book

Remote Sensing from Air and Space

2007-01-01

This book will guide you in the use of remote sensing for military and intelligence gathering applications. Remote Sensing from Air and Space is a must-read for students working on systems acquisition or for anyone interested in the products derived from remote sensing systems. R. C. Olsen of the Naval Postgraduate School offers an eclectic description of the technologies and underlying physics for a wide range of remote sensing systems, including optical, thermal, radar, and lidar systems. This monograph describes this diverse set of applications using full-color graphics and a friendly, readable format.

Book

Optical Microscopy of Fiber-Reinforced Composites

2010-01-01

Optical microscopy is one of the most valuable, but under utilized, tools for analyzing fiber reinforced polymer matrix composites. This hands-on instructional book covers a wide range of topics including sample preparation, illumination and contrast techniques, methods and reagents, and applications. Studies are presented that provide insight into processing effects, toughening approaches, damage mechanisms, and environmental effects on the microstructure of composite materials. In addition, the power of optical microscopy to study the microstructure of these heterogeneous, anisotropic materials is illustrated with more than 180 full color images.

Book

Neck Injury

2002-10-01

This book draws upon a variety of the author's experiences during more than 25 years in automotive safety. It gives an introduction to plain film radiographs (x-rays), computed tomograms (CTs), and magnetic resonance images (MRIs) such that vehicle safety professionals can use these techniques to help piece together the puzzle and provide a better understanding of the relationship between vehicle crash scenarios and occupant injury. For those with a primarily vehicle background, Neck Injury provides an overview of how x-rays, CTs, and MRIs may be used as a source of information to help analyze vehicle crashes and the associated injuries. For those with a clinical background, the book provides insight into how injuries relate to the vehicle crash. Chapters cover: Anatomy Imaging Injuries and Injury Mechanisms

Book

Microelectronics Failure Analysis, Sixth Ed.

2011-10-01

This updated reference book, prepared by experts in their fields, contains dozens of articles covering a wide range of topics involving the failure analysis of microelectronics. It places the most important and up-to-date information on this subject at your fingertips.

Book

Metallography of Steels: Interpretation of Structure and the Effects of Processing

2018-01-01

Updated and translated by André Luiz V. da Costa e Silva This book is a combination of a metallographic atlas for steels and cast irons and an introductory textbook covering the fundamentals of phase transformations and heat treatment of these materials. Every important stage of processing, from casting to cold working is clearly discussed and copiously illustrated with metallographs that show the obtained structures, both desired and those achieved when deviations occur. First published in 1951 by Professor Hubertus Colpaert from the Institute for Technological Research (IPT) of São Paulo, Brazil, this book became one of the most important Brazilian references for professionals interested in the processing, treatment, and application of steels and cast irons.

Book

Managing Electric Vehicle Power

2020-08-31

Power management involves all the power consumed in an electric vehicle (EV), so it impacts the vehicle's performance, safety, and driving range. To provide these vehicle characteristics, power management: Ensures that the proper power, voltage, and current are applied to each electronic circuit. Ensures that there is isolation between low-voltage and highvoltage (HV) circuits. Offers power circuit protection against electrical disturbances that can affect internal or external circuits. Managing Electric Vehicle Power provides complete coverage for understanding how best to utilize the primary power source across all the EV's Electric Control Units. Readers will also be introduced to the qualification standards of the Automotive Electronics Council (AEC). AEC standards are a 'one-time' qualification that typically takes place at the end of the development cycle.

Book

Lumbar Injury Biomechanics

2013-08-01

The amount of load that can be borne by the different components of the lumbar region is fairly well understood, as are resulting injuries from overloading. Less severe lumbar injuries involve a wide range of factors, including: heredity, obesity, age, occupation, sports, cardiovascular risk factors, and depression. Some of the most painful conditions that require high levels of care involve lumbar spine fracture or soft tissue injury from falls, contact sports, vehicle collisions, aircraft ejection, and underbody blasts from roadway explosions (military injuries). Each of these injury scenarios elicits a different kinematic response of the spine as a result of load direction, magnitude, and duration. Updated from a popular earlier volume, this new compendium includes landmark papers from 1994 through 2013 that focus exclusively on lumbar injuries.

Book

LiDAR Technologies and Systems

2019-07-10

LiDAR is one of many active sensor technologies that uses electromagnetic radiation. Operating in the optical and infrared wavelengths, it is similar to more-familiar passive EO/IR sensor technology. It is also similar to radar in that it uses reflected electromagnetic radiation emitted by the sensor. LiDAR is commonly used for making high-resolution maps and has applications in geodesy, geomatics, archaeology, geography, geology, geomorphology, seismology, forestry, atmospheric physics, laser guidance, airborne laser swath mapping, and laser altimetry. It is also being used for control and navigation of some autonomous cars. The first part of LiDAR Technologies and Systems introduces LiDAR and its history, and then covers the LiDAR range equation and the link budget (how much signal a LiDAR must emit in order to get a certain number of reflected photons back), as well as the rich phenomenology of LiDAR, which results in a diverse array of LiDAR types.

Book

LiDAR Technologies and Systems

2019-07-10

Why are vision systems fundamental and critical to autonomous flight? What are the vision system tasks required for autonomous flight? How can those tasks be approached? It addresses the role of vision systems for autonomous operations and discusses the critical tasks required of a vision system, including taxi, takeoff, en-route navigation, detect and avoid, and landing, as well as formation flight or approach and docking at a terminal or with other vehicles. These tasks are analyzed to develop field of view, resolution, latency, and other sensing requirements and to understand when one sensor can be used for multiple applications. Airspace classifications, landing visibility categories, decision height criteria, and typical runway dimensions are introduced. The book provides an overview of sensors and phenomenology from visible through infrared, extending into the radar bands and including both passive and active systems.

Book

Laser Diagnostics and Optical Measurement Techniques in Internal Combustion Engines

2012-07-30

The increasing concern about CO2 emissions and energy prices has led to new CO2 emission and fuel economy legislation being introduced in world regions served by the automotive industry. In response, automotive manufacturers and Tier-1 suppliers are developing a new generation of internal combustion (IC) engines with ultra-low emissions and high fuel efficiency. To further this development, a better understanding is needed of the combustion and pollutant formation processes in IC engines. As efficiency and emission abatement processes have reached points of diminishing returns, there is more of a need to make measurements inside the combustion chamber, where the combustion and pollutant formation processes take place. However, there is currently no good overview of how to make these measurements.

Book

Kinetic Energy Recovery Systems for Racing Cars

2013-04-02

A kinetic energy recover system (KERS) captures the kinetic energy that results when brakes are applied to a moving vehicle. The recovered energy can be stored in a flywheel or battery and used later, to help boost acceleration. KERS helps transfer what was formerly wasted energy into useful energy. In 2009, the Federation Internationale de l’Automobile (FIA) began allowing KERS to be used in Formula One (F1) competition. Still considered experimental, this technology is undergoing development in the racing world but has yet to become mainstream for production vehicles. The Introduction of this book details the theory behind the KERS concept. It describes how kinetic energy can be recovered, and the mechanical and electric systems for storing it. Flybrid systems are highlighted since they are the most popular KERS developed thus far. The KERS of two racing vehicles are profiled: the Dyson Lola LMP1 and Audi R18 e-tron Quattro.