Search Results

Enhanced SATCOMs for Unmanned Aerial Systems The Bus Too Tough to Die Combating Infrared Threats on the Battlefield Optical Interconnect Design Challenges in Space High-Performance Computing for the Next-Generation Combat Vehicle Merging Antenna and Electronics Boosts Energy and Spectrum Efficiency Integrated Magneto-Optical Devices for On-Chip Photonic Systems Development of magneto-optical (MO) materials could lead to a range of nonreciprocal optical devices for emerging standardized photonic integrated circuit (PIC) fabrication processes. Low Power Optical Phase Array Using Graphene on Silicon Photonics Electrostatic doping of 2D materials embedded in waveguides could enable ultrafast devices with unprecedented power. Spatial Resolution and Contrast of a Focused Diffractive Plenoptic Camera New technology captures spectral and spatial information of a scene in one snapshot while raising pixel counts and improving image quality.

Detecting Drones with Doppler-Based Radar Digital Transformation for a Connected Enterprise Using Electromagnetic Brakes to Keep Thrust Reversers in Place Thermostatic Solutions for Temperature Control Applications Bringing RF into the Embedded World: It's Time Compact Power Amplifier Solution for Electronic Warfare Burner Rig Testing of A500® C/SiC Test method simulates, in a laboratory environment, the service conditions ceramic-matrix composite material would experience in turbine engine exhaust applications. Space Debris Orbit and Attitude Prediction for Enhanced and Efficient Space Situational Awareness Developing accurate models to predict the behavior of manmade debris in space could be the key to preventing collisions with satellites. Maintaining Enterprise Resiliency Via Kaleidoscopic Adaption and Transformation of Software Services (MEERKATS) Implementing new technologies to create a more resilient, secure cloud computing environment.

New Technologies Tackle UAV Challenges Robotic Applique Kits Leverage Existing Assets Educating UGVs Implementing AI Advancements in Thermal Image Training Data Sets Protecting Critical Data on Unmanned Underwater Platforms Advancements Made to the Wingman Software-in-the-Loop (SIL) Simulation: How to Operate the SIL New features include the creation of virtual environments that match real-world gunnery test courses. Soldier-Robot Team Communication: An Investigation of Exogenous Orienting Visual Display Cues and Robot Reporting Preferences The effective use of robots to conduct dangerous missions depends on accurate man-machine communications. Soft Robotic Fish Swims Alongside Real Ones in Coral Reefs GPS Enabled Semi-Autonomous Robot Combining GPS signals with acoustic and encoder data gives a robot the ability to determine its location and orientation within a reference frame.

Beyond VMEbus - A New Concept Taming the Thermal Behavior of Solid-State Military Lasers Solving the Challenge of Thermal Design in Aerospace Electronics Improving Component Life in Abrasive, Corrosive Aerospace Environments New Pulse Analysis Techniques for Radar and EW Validation of Ubiquitous 2D Radar Converting Existing Copper Wire Firing System to a Fiber-Optically Controlled Firing System for Electromagnetic Pulsed Power Experiments Technological improvements make pulsed-power experiments with gunpowder- or air-driven guns safer. Low-Cost Ground Sensor Network for Intrusion Detection COTS-based system could provide increased level of security with less manpower. In-Network Processing on Low-Cost IoT Nodes for Maritime Surveillance Commercially available system of distributed wireless sensors could increase the Navy's intelligence collection footprint.

Designing a High-Speed Decoy Unmanned Aerial Vehicle (UAV) Using Thermoplastics in Aerospace Applications In-Flight Real-Time Avionics Adaptation Using Turbine Flow Meters for Aerospace Test and Measurement Applications Communicating from Space: The Front End of Multiscale Modeling Laser-Based System Could Expand Space-to-Ground Communication Hydraulic Testing of Polymer Matrix Composite 102mm Tube Section Research could lead to development of a composite material that can be processed at a low temperature and still be used at 1000°F. Permeation Tests on Polypropylene Fiber Materials Study attempts to determine if polypropylene nanofiber materials can be used in air filtration systems to remove toxic vapors. Inter-Laboratory Combat Helmet Blunt Impact Test Method Comparison Ensuring consistent test methods could reduce the risk of head injuries.

Harley-Davidson's e-bike shocker (video) Is the motorcycle market ready for a Harley-Davidson EV? Project LiveWire was designed to provide answers, said Chief Engineer Jeff Richlen. Airbus has its eye on the future of cleaner flight CleanSky 2 targets are to increase aircraft fuel efficiency enough to reduce CO2 emissions by 20-30% and reduce aircraft NOx and noise emissions by 20-30% compared to newly designed aircraft entering into service in 2014-or essentially halve 2005 CO2 emissions levels by 2050. Soul EV extends the range frontier (video) Specially formulated NCM battery cells are key in giving the vehicle class-leading EV range while enabling engineers to fit a high-energy-density battery pack underfloor with little sacrifice of passenger cabin space.

Lithium-ion refinement Even as high-profile fires create concern, battery and car makers accelerate their move toward lithium-ion technology with advances in cost, performance, and safety. NASA's quest for maximum efficiency As part of its hybrid body wing aircraft with turboelectric distributed propulsion system, NASA has proposed to use a superconducting and cryogenic electrical system to connect the electrical output of the generators to the motors.

Heavy-duty engine design Increasing regulations and market demands call for cleaner, more durable and fuel-efficient engines. Developers rely on CAE simulation, enhanced test methods and 3D printing to keep up. Switching to comfort mode Switches, knobs and touch panels evolve to reduce operator fatigue. Big on prognostics Smart data-analyzing procedures that support predictive maintenance will help to significantly increase the uptime of heavy-duty vehicles. The "Evolution of Big Data" symposium at SAE COMVEC 2018 addresses such critical topics. Starship road trip Optimized aerodynamics and production-ready technologies propel Shell's Class 8 concept to a 248% freight-ton-efficiency improvement.

Engine electronics come of age Changes in global standards, combined with engineering know-how, have resulted in a new generation of clean, quiet, and efficient engines. Operators are rolling in the chips Microprocessors and sensors are being combined to monitor the way that equipment is being used, then help operators to perform better in that environment. Gaining weight Perkins' influence in the off-highway industry grows as it evolves its global engine lines and expands its presence in the U.S. What's new at CONEXPO-CON/AGG, Part 2 of 2 A preview of some of the products and technologies that will be displayed at this year's event, scheduled March 15-19 in Las Vegas, NV. Engineering a career Off-highway companies are challenged not only by the ever-changing technology landscape, but also by finding the engineering talent to help them succeed in it.

Taking on the Valeo Innovation Challenge Two Canadian teams-the University of Ottawa and the University of Waterloo-finished in the top 3 among about 1,000 other universities from around the world in this challenge devoted to spurring innovative ideas for transportation. Colorado State University designs fuel-cell plug-in hybrid system Competing in the EcoCAR2 competition using a Chevrolet Malibu, the Colorado State team designed a system that features a 15-kW polymer electrolyte membrane fuel cell system, an 18.9-kW•h/177-kW lithium-ion battery, and a 145-kW motor. Cal State Fullerton combines art and engineering Team's submission on its Formula SAE car won first place in the second annual Generation Auto video contest organized in part by SAE International. Collaborative research project leads to potentially swarming VTOL UAVs The AVIGLE VTOL (vertical takeoff and landing) unmanned aerial vehicle was developed via collaboration by a variety of entities for a variety of applications.

Evaluation of heavy-vehicle aerodynamic drag In an attempt to achieve a balance between Reynolds number, model scale, and tunnel blockage issues, a 1:3 scale heavy-vehicle testing program has been initiated at the Monash University 1.4-MW wind tunnel. Validating performance suspension parts advances A forum at the 2013 SEMA Show discussed three approaches to ensure performance parts compliance with Federal Motor Vehicle Safety Standard 126. Panelists also explained how simulation data, and kinematics and compliance measurements, can improve performance parts design. Active safety starts in the pilot's seat Dassault Aviation's next-generation integrated digital avionics systems contribute to enhanced air safety in civil applications. Chevrolet ups the performance ante with MY2015 Corvette Z06 Stiffer-bodied sports car gains wind-aided performance with supercharging and downforce for faster lap times.

When real life and FEA meet Model validation becomes the focus for building the chassis of a BAJA SAE vehicle. One student offers his advice for making smart choices while using FEA. Wait...where is Manitoba? Andrew Smith, Executive Vice Chair for the University of Manitoba's SAE International Chapter faces limited resources and the growth of what was once a small team. High hopes or just dreaming? A look at how Asia's aircraft manufacturers are trying to break into new markets to challenge the status quo. Operators see bright screens in their future HMIs borrow from tablets, phones to help operators perform a broad range of tasks.

Inductive approach An engineering professor from Ryerson uses MapleSim to introduce more exploratory methods of teaching. Monash University scores fourth Formula SAE-A win The Monash University Formula SAE-A team demonstrated its dominance by winning its fourth consecutive Australasian event in Melbourne last December. Audi Urban Intelligent Assist The three-year joint effort between Audi AG, the Volkswagen Group Electronics Research Laboratory (ERL) in Belmont, CA, the University of Southern California, the University of California at Berkeley, and the University of California at San Diego aimed at improving drivers' information and decision-making capabilities. Hovering aircraft programs The AW609 tiltrotor and the X3 compound helicopter offer different technology solutions to the challenge of achieving higher speeds and higher-quality point-to-point air transport.

ETS Baja parts failure analysis: Geared for success When the ETS Baja team had to withdraw from the Baja Auburn 2012 event due to abnormal gear failure, an extensive analysis was required to ensure that problems of this nature would not surface again. After some serious investigation, the conclusion of almost 30 hours of research was unexpected and proved surprisingly simple. Body and soul rule at 2012 Formula SAE Months before the Formula SAE Michigan competition in May, teams were hashing out product development decisions. The end-game was presenting a racecar that had the right stuff for earning high points in the challenge's vehicle design evaluation as well as the acceleration, skid pad, endurance, and autocross dynamic performance events.

Electrochemical reactions Students from the Department of Automotive Engineering at the NED University of Engineering and Technology build the first onboard fuel-cell vehicle of Pakistan. The Baja balance How to combine heavy homework load with your CDS team responsibilities. Embraer progresses on clean-sheet military program It has been over two years since Embraer announced that it would be developing the KC-390 military airlift and tanker jet under a contract with the Brazilian Air Force (FAB), which established the requirements for the aircraft as it did with other Embraer military programs. Calling all recruiters Lack of response to distributed resumes leaves many wondering, is anyone out there?

High-speed education @ formula hybrid event Annual competition provides a hands-on learning experience for undergraduate and graduate engineering students. Body-shaped for supermileage Six different single-occupant vehicles designed and built by teams of collegiate engineering students snared four-digit fuel economy at Eaton Corp.'s Marshall, MI, test track during the 31st annual SAE Supermileage competition in June. Mercedes-AMG goes with the current flow Opening the doors on new technology. First flight approaches for 'disruptive' new UAV engine An earlier iteration of UAS' Nightwind 2 in flight, powered by an off-the-shelf industrial engine. Three resume tips for college grads Employers often hire recent graduates to mold new hires to their own corporate culture and work philosophy, leading some employers to look more for potential than for specific experience.

Giving the blind the freedom to drive A Virginia Tech student team answers a call to action by the National Federation of the Blind's Jernigan Institute. 'Ultimate Youthmobile' of 2030 At the 2009 LA Auto Show, California designers envision the future. BMW's six-cylinder motorcycle Concept points to possible production bike. Modeling and simulation put emphasis on early planning The shift to model-based design and simulation is changing the way aircraft are designed, shifting the focus to the early phases of development. Early planning is critical for success, as is establishing techniques that ensure that files move freely between various work teams.

The advent of stop-start technology As environmental concerns grow for R&D teams, OEMs look to bring the strategy further into the mainstream. Recycling opportunities for hybrid/electric vehicle lithium-ion batteries With limited reserves and strict environmental regulations, re-cyclers look to established extraction means to reuse, recycle, and dispose of the used batteries. Cameras look to go the distance Automakers seek vision systems with greater distances, improved reliability, and more functionality, thanks to ruggedized complementary metal-oxide semiconductor technologies. Getting right with composites With composites now a mainstay in most new aircraft de-signs, the engineering emphasis has switched from understanding if they work to thinking through the most efficient way to manufacture them, such as using design-for-manufacturing software.

The car is the star at Formula SAE 2019 saw more Formula SAE competitions, more cars, more teams…and more victories. Air mission Introduction of autonomous gliders were among the changes implemented for SAE Aero Design 2019. Baja believers The battle for the Baja SAE season championship went down to the wire, as usual. Competition comes to Mcity University of Toronto repeats as winner in the second year of the AutoDrive Challenge.

Advanced Class Starship Georgia Tech team right on the mark with glider-deploying RC aircraft at SAE Aero Design competition. 75 points Much more time and energy go into a Formula SAE Presentation Event than one might think. Major redesign A new electronic CVT highlighted a year of major vehicle upgrades for the historically strong Baja SAE team from ETS.