Search Results

Enhanced SATCOMs for Unmanned Aerial Systems The Bus Too Tough to Die Combating Infrared Threats on the Battlefield Optical Interconnect Design Challenges in Space High-Performance Computing for the Next-Generation Combat Vehicle Merging Antenna and Electronics Boosts Energy and Spectrum Efficiency Integrated Magneto-Optical Devices for On-Chip Photonic Systems Development of magneto-optical (MO) materials could lead to a range of nonreciprocal optical devices for emerging standardized photonic integrated circuit (PIC) fabrication processes. Low Power Optical Phase Array Using Graphene on Silicon Photonics Electrostatic doping of 2D materials embedded in waveguides could enable ultrafast devices with unprecedented power. Spatial Resolution and Contrast of a Focused Diffractive Plenoptic Camera New technology captures spectral and spatial information of a scene in one snapshot while raising pixel counts and improving image quality.

New Technologies Tackle UAV Challenges Robotic Applique Kits Leverage Existing Assets Educating UGVs Implementing AI Advancements in Thermal Image Training Data Sets Protecting Critical Data on Unmanned Underwater Platforms Advancements Made to the Wingman Software-in-the-Loop (SIL) Simulation: How to Operate the SIL New features include the creation of virtual environments that match real-world gunnery test courses. Soldier-Robot Team Communication: An Investigation of Exogenous Orienting Visual Display Cues and Robot Reporting Preferences The effective use of robots to conduct dangerous missions depends on accurate man-machine communications. Soft Robotic Fish Swims Alongside Real Ones in Coral Reefs GPS Enabled Semi-Autonomous Robot Combining GPS signals with acoustic and encoder data gives a robot the ability to determine its location and orientation within a reference frame.

Beyond VMEbus - A New Concept Taming the Thermal Behavior of Solid-State Military Lasers Solving the Challenge of Thermal Design in Aerospace Electronics Improving Component Life in Abrasive, Corrosive Aerospace Environments New Pulse Analysis Techniques for Radar and EW Validation of Ubiquitous 2D Radar Converting Existing Copper Wire Firing System to a Fiber-Optically Controlled Firing System for Electromagnetic Pulsed Power Experiments Technological improvements make pulsed-power experiments with gunpowder- or air-driven guns safer. Low-Cost Ground Sensor Network for Intrusion Detection COTS-based system could provide increased level of security with less manpower. In-Network Processing on Low-Cost IoT Nodes for Maritime Surveillance Commercially available system of distributed wireless sensors could increase the Navy's intelligence collection footprint.

Designing a High-Speed Decoy Unmanned Aerial Vehicle (UAV) Using Thermoplastics in Aerospace Applications In-Flight Real-Time Avionics Adaptation Using Turbine Flow Meters for Aerospace Test and Measurement Applications Communicating from Space: The Front End of Multiscale Modeling Laser-Based System Could Expand Space-to-Ground Communication Hydraulic Testing of Polymer Matrix Composite 102mm Tube Section Research could lead to development of a composite material that can be processed at a low temperature and still be used at 1000°F. Permeation Tests on Polypropylene Fiber Materials Study attempts to determine if polypropylene nanofiber materials can be used in air filtration systems to remove toxic vapors. Inter-Laboratory Combat Helmet Blunt Impact Test Method Comparison Ensuring consistent test methods could reduce the risk of head injuries.

Laser Detecting Systems Enhancing Survivability and Lethality on the Battlefield Designing With Plastics for Military Equipment Engine Air-Brakes Paving the Way to Quieter Aircraft Nett Warrior Enhancing Battlefield Connectivity and Communications XPONENTIAL 2018 - An AUVSI Experience Communications in Space: A Deep Subject First Air-Worthy Metal-Printed RF Filter Ready for Takeoff Validation of Automated Prediction of Blood Product Needs Algorithm Processing Continuous Non-Invasive Vital Signs Streams (ONPOINT4) Using a combination of non-invasive sensors, advanced algorithms, and instruments built for combat medics could reduce hemorrhaging and improve survival rates. Calculation of Weapon Platform Attitude and Cant Using Available Sensor Feedback Successful development of mobile weapon systems must incorporate operation on sloped terrain.

Harley-Davidson's e-bike shocker (video) Is the motorcycle market ready for a Harley-Davidson EV? Project LiveWire was designed to provide answers, said Chief Engineer Jeff Richlen. Airbus has its eye on the future of cleaner flight CleanSky 2 targets are to increase aircraft fuel efficiency enough to reduce CO2 emissions by 20-30% and reduce aircraft NOx and noise emissions by 20-30% compared to newly designed aircraft entering into service in 2014-or essentially halve 2005 CO2 emissions levels by 2050. Soul EV extends the range frontier (video) Specially formulated NCM battery cells are key in giving the vehicle class-leading EV range while enabling engineers to fit a high-energy-density battery pack underfloor with little sacrifice of passenger cabin space.

Why Volt? After 48 months' development, the 2011 Chevrolet Volt has enetered series production. The pioneering "E-REV" is as important to the mobility industry as it is to GM. Creating the heart of Volt GM's battery requirements meant creating new state-of-the-art in-vehicle engery storage - and doing it in less than four years. Top GM and supplier engineers reveal how they did it. Engineering with maniacal focus A dedicated, cohesive team and a conservative engineering approach put this innovative vehicle into production at moon-shot speed. A unique electrified transaxle Hybrid or not? Definitions aside, what really matters is GM wisely leveraged its next-generation Two Mode propulsion technology to give Volt greater overall efficiency. Sweating the body details Extensive wind-tunnel work gave Volt a shape that's slicker than it looks. But engineers aren't happy with the curb weight.

Lithium-ion refinement Even as high-profile fires create concern, battery and car makers accelerate their move toward lithium-ion technology with advances in cost, performance, and safety. NASA's quest for maximum efficiency As part of its hybrid body wing aircraft with turboelectric distributed propulsion system, NASA has proposed to use a superconducting and cryogenic electrical system to connect the electrical output of the generators to the motors.

Advances for off-highway engine design As manufacturers continue to drive out cost and meet a worldwide patchwork of regulatory frameworks, the tools for developing those engines are advancing. From showcase prototypes to advanced analytical techniques, suppliers are helping the cause. Military vehicles battle for autonomy at lower cost Engineers are adding sensors, more powerful micros and faster networks as they automate tasks and pave the way to autonomy. Heavy duty lightweighting Optimization of tractor-trailer systems and component design helps to reduce overall vehicle mass, a key strategy in improving fuel economy and meeting upcoming Phase 2 GHG regulations. Navistar's SuperTruck II explores composites, WiFi to cut weight Methane state of mind New Holland ramps up its focus on alternative fuels, showcasing a methane-powered concept tractor that trims emissions, operating costs.

Virtual powertrain development Simulation is critical for efficient product development, but proper tool selection and efficient data management are keys to success. Blue Arc amps up for EV production Shyft Group's EV subsidiary is lighting the path for the electrification of last-mile delivery vehicles as well as mobile charging solutions. Increasing connectivity in construction Jobsites look to overcome challenges posed by mixed fleets and proprietary telematics to achieve "one-dashboard" vision and increased machine utilization.

The next phase Meeting Phase 2 fuel efficiency and GHG emissions for heavy trucks will require multiple technology pathways-some of which are still on the horizon. Active vibration damping for construction machines An innovative concept for an active system to reduce machine oscillations based on frequency identification. Consumer electronics come on board Smartphones and tablets are likely to play a large role in HMIs for heavy vehicles-if productivity and safety are not compromised. Patton's new campaign As new SAE International President for 2017, Doug Patton will advocate STEM, "cultivation" of prospective young engineers. PACCAR's Sproull primed for SAE Commercial Vehicle post As SAE International's new 2017-2020 Commercial Vehicle Sector VP, Landon Sproull intends to bolster the society's involvement in evolving industry regulations and to better cultivate cross-sector alliances.

Steel sector aids sustainability Volvo Group partners with SSAB on 'green steel' for off-highway machines and with Ovako for access to fossil-free hydrogen. CV autonomy: Picking the 'low-hanging fruit' Increasingly automated commercial vehicles offer challenges and opportunities in simulation, data management and standardization. Developing EV-specific lubes As electric-vehicle technology accelerates, dedicated e-fluids are necessary to maintain proper levels of drivetrain performance. Editorial Real-world emphasis on electric Mahle, Liebherr develop active pre-chamber for hydrogen ICE ABS ramps up commercial-vehicle battery-pack assembly Navistar updates A26 engine, improves FE by 4% Bosch debuts new CV-specific electric motor and inverter Western Star adds 'weight sensitive' 47X to vocational lineup Hyundai CE launches next-gen electric forklift Q&A Mahle's Laurent Art discusses thermal-management challenges, solutions for battery and fuel-cell electric commercial vehicles.

Meeting truck autonomy hurdles head-on Combining sensors, inter-vehicle communications and controllers poses major challenges in the effort to bring greater levels of automation to commercial trucking. Simulation key to additive manufacturing analysis Advanced simulation tools help to optimize 3D printing processes before physical build. Making the case for battery-electric fleet power Battery systems edge closer to a tipping point as commercial and heavy-duty fleets broaden their application. Electrified forklifts go big Hoist Liftruck brings full electrification to some of the biggest forklift trucks, motivated only in part by regulatory pressures.

Accelerating truck autonomy Platform-agnostic interfaces, field data analytics and smart diagnostics will help the commercial-vehicle industry reach SAE Level 4 and 5 operations sooner. Upswing in outsourced EV testing As testing for electric commercial-vehicle propulsion systems surges, Drive System Design is rushing to expand its testing capabilities in the U.S. to keep up with the demand. Global emissions regs demand differing engine strategies The best choice in emissions-reducing technology varies for the U.S. versus Europe and elsewhere, a Jacobs expert details. Precision ag aids sustainability Deere expert Deanna Kovar, a 2021 SAE COMVEC keynoter, provides her thoughts on the future of autonomy, computer vision and machine learning, data management and more.

Connectivity takes center stage Telematic links have become the norm, helping fleet owners and operators improve efficiency and letting OEMs predict component failures. More power, less noise, fewer emissions These key attributes drive development of new generators both big and small. TARDEC pursues advanced power generation U.S. Army, GM collaborate on fuel-cell-generated electricity to power the vehicle's propulsion system and onboard electronics, while providing off-vehicle power via an Exportable Power Take-Off unit. Developing an alternative engine concept Ricardo's CryoPower engine leverages two unique combustion techniques for reduced emissions and fuel consumption-liquid nitrogen and split combustion. Long-haul trucking and stationary power generation will be the first beneficiaries of the technologies. Technology time-warp The road to autonomous driving has been under construction for decades, as showcased by SAE's Mobility History Committee at the 2018 WCX in Detroit.

Alternative fuels heat up This is a rich time for combustion researchers. The need for better fuel efficiency and improved emissions has never been greater. New software model to help engine makers meet diesel soot standards Simulation enables engineers to predict particulate formation early in the design process.

The Best of COMVEC 2016 Autonomous vehicles, improved fuel efficiency and thermal management are among the pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Autonomous solutions in agriculture Pneumatically shifted air suspension loading on 6x2 trucks Optimizing waste heat recovery for long-haul trucks Downsizing a HD diesel engine for off-highway applications Fan-shroud optimization for enhanced thermal performance Touch takes hold, switches lend a hand Touch screens are becoming the norm, but knobs and switches are often used to improve operator comfort. U.S. Army marches toward driverless future TARDEC targets vehicle autonomy with new V2V / V2X test bed in Michigan.

Improving heavy-duty engine component efficiencies Cylinder deactivation can improve fuel economy by using a reduced number of cylinders that operate at higher loads and thermal efficiency, while other cylinders are turned off, when the engine operates at partial load conditions. A switching roller finger follower is one of the technologies that help make it work. Pumping up hydraulic capabilities Electrohydraulic advances keep coming as distributed electronics flex their muscle. Tracking the trends in commercial vehicle communications Industry insiders at Molex offer what they think the future may hold for heavy-duty components in 24/7 communications systems. ADAS system validation It is crucial that different advanced driver assistance systems functionalities interact seamlessly with existing electronic control unit (ECU) networks.

The evolution of engineering via computer CAD has come a long way since the 1970s and '80s. Now with a price tag less that 10% of a 1980 system, CAD and its add-ons can tackle an ever-increasing range of tasks inculding automated engineering.

Engine electronics come of age Changes in global standards, combined with engineering know-how, have resulted in a new generation of clean, quiet, and efficient engines. Operators are rolling in the chips Microprocessors and sensors are being combined to monitor the way that equipment is being used, then help operators to perform better in that environment. Gaining weight Perkins' influence in the off-highway industry grows as it evolves its global engine lines and expands its presence in the U.S. What's new at CONEXPO-CON/AGG, Part 2 of 2 A preview of some of the products and technologies that will be displayed at this year's event, scheduled March 15-19 in Las Vegas, NV. Engineering a career Off-highway companies are challenged not only by the ever-changing technology landscape, but also by finding the engineering talent to help them succeed in it.