Search Results

New Technologies Tackle UAV Challenges Robotic Applique Kits Leverage Existing Assets Educating UGVs Implementing AI Advancements in Thermal Image Training Data Sets Protecting Critical Data on Unmanned Underwater Platforms Advancements Made to the Wingman Software-in-the-Loop (SIL) Simulation: How to Operate the SIL New features include the creation of virtual environments that match real-world gunnery test courses. Soldier-Robot Team Communication: An Investigation of Exogenous Orienting Visual Display Cues and Robot Reporting Preferences The effective use of robots to conduct dangerous missions depends on accurate man-machine communications. Soft Robotic Fish Swims Alongside Real Ones in Coral Reefs GPS Enabled Semi-Autonomous Robot Combining GPS signals with acoustic and encoder data gives a robot the ability to determine its location and orientation within a reference frame.

A new Formula for racing The new Formula E series' electric racecars are intended to pioneer new technology for broader use in production, encouraging fans to think differently about the technologies they use. Production of satellite with first all-electric propulsion system advances Electric propulsion has been limited so far to small movements of the satellites once it is in its geostationary orbit. The Boeing 702SP innovation is its use of electric propulsion to raise the satellite from its launch-vehicle drop-off point to geostationary orbit. Using CAE to assess whining noise of electric powertrains To develop an electric powertrain with a minimum noise level and minimized whining it is necessary to have accurate CAE simulation and precise criteria to assess whining noise.

On the verge of the Digital Age Increasingly connected electrohydraulic systems and machine controls allow the high degree of controllability that's essential for automated operations. Miserly power systems Engineers push engine, transmission technologies to turn off fuel usage. All options on the table Powertrain developers who spoke at SAE COMVEC are leaving no stone unturned in their quest to trim emissions. Cab air quality: A critical component of operator comfort Focus on defining cab air quality, measuring it, and designing the needed performance into cabin designs and HVAC systems is intensifying. Expanding fast charging faster Tritium works to accelerate installation of DC fast-charging infrastructure to keep up with growing demand for commercial EVs.

Advances for off-highway engine design As manufacturers continue to drive out cost and meet a worldwide patchwork of regulatory frameworks, the tools for developing those engines are advancing. From showcase prototypes to advanced analytical techniques, suppliers are helping the cause. Military vehicles battle for autonomy at lower cost Engineers are adding sensors, more powerful micros and faster networks as they automate tasks and pave the way to autonomy. Heavy duty lightweighting Optimization of tractor-trailer systems and component design helps to reduce overall vehicle mass, a key strategy in improving fuel economy and meeting upcoming Phase 2 GHG regulations. Navistar's SuperTruck II explores composites, WiFi to cut weight Methane state of mind New Holland ramps up its focus on alternative fuels, showcasing a methane-powered concept tractor that trims emissions, operating costs.

Calibration and complexity Off-highway engine applications continue to increase in complexity to meet emissions regulations and fuel economy targets as well as to take advantage of advances in electrification and mechatronics. The model-based calibration process has become the industry standard. ECU advances take many paths Controllers are evolving rapidly, with a range of microcontrollers distributed throughout the vehicle Working remotely A new electrohydraulic steering technology that offers energy efficiency improvement, increased productivity, enhanced safety, and adaptability to operating conditions also has the capacity to support remote operation of a compact wheel loader.

What's New at ConExpo/IFPE More new products and technologies that companies plan to showcase at this year's ConExpo-Con/Agg, which is co-located with the IFPE fluid-power event in Las Vegas from March 4-8, are previewed. Gearshift actuator dynamics in a dual clutch transmission The emergence of tougher environmental and fuel efficient legislations have triggered exploration and advance toward new and better vehicle transmission technologies. Software makes solid impact Programs are helping hydraulic systems do more while reducing operator workloads. Damping out booming noise NVH improvement techniques are gaining traction with the goal to improve the quality perception of off-highway equipment performance and operator comfort.

Tighter communications help OEMs meet tighter regulations Closer links between powertrains and hydraulic systems cut fuel usage and emissions while improving efficiency.

Rotary SI/CI combustion engines: A thing of the future? The internal combustion engine enjoys widespread use as an inexpensive and reliable power conversion system. While piston engines date back 150 years, various alternative engine architectures and cycles have been considered. Aftertreatment comes with challenging diagnosis Diagnosing engine and aftertreatment systems is forcing design teams to look at new ways to diagnose problems over long vehicle lifetimes. Taking on NVH reduction techniques A look at the enhanced durability benefits obtained by changing the polymer composition, manufacturing methods, and design optimization of a powertrain mount for an off-highway vehicle.

Heavy-duty designs on aftertreatment The introduction of stringent EPA 2015 regulations for locomotive/marine engines and IMO 2016 Tier III marine engines precipitated the need to develop large diesel engine aftertreatment systems. Gaining control of damping Strong nonlinearities of hydraulic systems and the unpredictable operating conditions of the specific application (e.g., uneven ground, varying loads) are the main challenges to the development of satisfactory general vibration damping methods and controls. Getting real about test cycles Fuel consumption of working machines is strongly influenced by machine specification, working environment, and operator behavior, therefore a mix of several test cycles is necessary. The case for Class 8 hybrids Hybrid technology may not be the best solution for all heavy-truck applications, but a Caron Engineering expert explains how it can still benefit Class 8 vehicles.

Heavy-duty engine blender Researchers at Southwest Research Institute and Navistar exploring the feasibility of micro-pilot diesel-injection dual-fuel combustion at key part load conditions found it offers ultra-low smoke and NOx emissions while maintaining diesel-comparable fuel consumption and noise levels.

Biofuel opportunities and pitfalls Annual growth in biofuels has been strong but is expected to slow in the near future. User interfaces going mainstream Off-highway HMIs use consumer technologies to add functions, simplify tasks. Reducing the environmental impact of hydraulic systems OEMS and their suppliers are creating new hydraulic systems and components, using new fluids and remanufacturing to save energy and reduce the environmental impact of off-highway equipment. Multiple controllers add to EV complexity Model-based design has revolutionized the way products are developed, with design shifting from parts to the whole.

Quiet in the cab As NVH gains importance in the quality of off-highway machines' performance and operator comfort, it is essential to understand every aspect of the machine noises and its annoyance effect to the operator's comfort.

After diesel A look at some offshoots-hybrids, HCCI, and alternative fuels-to the ever-popular diesel engine in the off-highway industry. Software gains (hydraulic) power Development processes are being revised as software becomes a centerpiece of electrohydraulic designs. Virtual sensing gets real As emissions regulations get more strict, emissions measurement must get more precise for onboard diagnostics, engine control, and model-based controller design.

Look Ma, no driver Unmanned vehicles evolve quickly as processors, sensors improve performance. Calling all hydraulics engineers As the industry knows all too well, hydraulics engineers are hard to come by; a look at how companies are hiring, training, and, most important, retaining engineers. Making diesels quiet and clear Researchers look at the relative influence of gear design parameters on the rattle noise of a diesel engine timing gear train.

Easy to control Designers grab a range of technologies to create controls that are simpler for operators to use. Designing quiet off-highway equipment OEMs and suppliers are using new materials and innovative designs to reduce NVH for both vehicle operators and the environment. Using FEA in off-highway design The process of considering weld redundancy in virtual simulation is a complex way of ensuring that weldment design is robust enough to prevail over accidental weld redundancy that might occur during manufacturing. Efficient and effective leadership Frank O. Klegon, a 30-year SAE member and former product development VP at Chrysler, begins term as chief elective officer of SAE International. Making battlefield targets disappear The use of 'smart' special materials has the potential to radically alter the way military platforms are defended, and used.

Materials' effect on aftertreatment Researchers from Tenneco discuss DPF acoustic performance through an evaluation of various materials and conditions.

The man challenges of Tier 4 engineering Cutting and controlling emissions are the surface goals, but designers must also manage to cut and control costs, while adding complexity. A cool look at heat protection CFD is used to predict flow and thermal fields within the engine compartment both at steady state and transient conditions. Hushing hydraulics Researchers from the Georgia Institute of Technology put their energies into novel, compact devices for reducing fluid-borne noise.

Making the leap from remanufacturing to new manufacturing Next-generation straddle carrier has intelligent controls, electrohydraulic braking.

Heavy-duty issues Top industry insiders provide their perspectives on critical issues such as sustainability, workforce development, and future growth at this year's Commercial Vehicle Engineering Congress and Exhibition. Autonomouse vehicles go off-highway Advances in sensors, CPUs, and software help in the druve to eliminate drivers. Power and precision Hydraulic motors and actuators evolve along two paths, both relying on advanced controls.

Whistle down the wire Collaboration between OEMs and suppliers leads to new advances, and challenges, for electrohydraulic system control. Chipping away at drivetrain challenges Chips, sensors, controllers, software all combine to help engineers improve efficiency. Engineering disciplines unite Design tools help disparate groups provide input throughout the development process. Innovative thinking 101 West Virginia University professor Dr. James E. Smith issues a call for innovation as one of the central themes of his term as SAE's 2009 President.