Search Results

Enhanced SATCOMs for Unmanned Aerial Systems The Bus Too Tough to Die Combating Infrared Threats on the Battlefield Optical Interconnect Design Challenges in Space High-Performance Computing for the Next-Generation Combat Vehicle Merging Antenna and Electronics Boosts Energy and Spectrum Efficiency Integrated Magneto-Optical Devices for On-Chip Photonic Systems Development of magneto-optical (MO) materials could lead to a range of nonreciprocal optical devices for emerging standardized photonic integrated circuit (PIC) fabrication processes. Low Power Optical Phase Array Using Graphene on Silicon Photonics Electrostatic doping of 2D materials embedded in waveguides could enable ultrafast devices with unprecedented power. Spatial Resolution and Contrast of a Focused Diffractive Plenoptic Camera New technology captures spectral and spatial information of a scene in one snapshot while raising pixel counts and improving image quality.

Beyond VMEbus - A New Concept Taming the Thermal Behavior of Solid-State Military Lasers Solving the Challenge of Thermal Design in Aerospace Electronics Improving Component Life in Abrasive, Corrosive Aerospace Environments New Pulse Analysis Techniques for Radar and EW Validation of Ubiquitous 2D Radar Converting Existing Copper Wire Firing System to a Fiber-Optically Controlled Firing System for Electromagnetic Pulsed Power Experiments Technological improvements make pulsed-power experiments with gunpowder- or air-driven guns safer. Low-Cost Ground Sensor Network for Intrusion Detection COTS-based system could provide increased level of security with less manpower. In-Network Processing on Low-Cost IoT Nodes for Maritime Surveillance Commercially available system of distributed wireless sensors could increase the Navy's intelligence collection footprint.

Walking the torque A system that fills in the torque gap of a turbocharged diesel engine, allowing a smaller power unit to punch well above its size, without the dreaded 'lag'-that has to be a winner, surely. So a decade later, why has it yet to come to market? Ian Adcock ponders the reasons Tipping the scales The original Range Rover revolutionised the automotive industry when it was launched. Some 42 years later, the latest version looks very much set to do the same as Ian Adcock reports Can computers take control safely? In the name of improved safety, some favour a future where automation takes charge of a fast-moving vehicle. The more cautious support advanced systems that simply warn drivers of potential problems. Who will win out? Chris Edwards reports

The buzz about electric aircraft Emissions limits force the aviation industry to study hybrid and battery-electric propulsion systems. Car-to-X marks the secure beamforming spot Intelligent networking of cars and infrastructure promises a future of enhanced active safety and traffic efficiency, though as an open and decentralized system, car-to-X is exposed to various attacks against security and driver's privacy. Talking big A look at factors that should be considered by OEMs when implementing a telematics solution in the heavy-duty on- and off-highway mobile equipment markets.

Virtual powertrain development Simulation is critical for efficient product development, but proper tool selection and efficient data management are keys to success. Blue Arc amps up for EV production Shyft Group's EV subsidiary is lighting the path for the electrification of last-mile delivery vehicles as well as mobile charging solutions. Increasing connectivity in construction Jobsites look to overcome challenges posed by mixed fleets and proprietary telematics to achieve "one-dashboard" vision and increased machine utilization.

Deere advances in-field autonomy While stereo cameras and computer vision guide Deere's "limited- release" 8R autonomous tractor, Bear Flag's lidar tech will augment future machines. Positioning to centimeter-level improves agriculture Precision-navigation approaches that emphasize backward compatibility help farms reap more value from autonomous operations. Funding, mandates fuel commercial-vehicle electrification Legislators provide the impetus to electrify trucks and buses, leading to several engineering challenges.

Accelerating truck autonomy Platform-agnostic interfaces, field data analytics and smart diagnostics will help the commercial-vehicle industry reach SAE Level 4 and 5 operations sooner. Upswing in outsourced EV testing As testing for electric commercial-vehicle propulsion systems surges, Drive System Design is rushing to expand its testing capabilities in the U.S. to keep up with the demand. Global emissions regs demand differing engine strategies The best choice in emissions-reducing technology varies for the U.S. versus Europe and elsewhere, a Jacobs expert details. Precision ag aids sustainability Deere expert Deanna Kovar, a 2021 SAE COMVEC keynoter, provides her thoughts on the future of autonomy, computer vision and machine learning, data management and more.

Connectivity continues its advance More OEMs and Tier 1 suppliers are focusing on embedded telematic systems, hoping to displace aftermarket hardware. Tailoring fuel injection to control NOx The next big step to help heavy-duty diesel engines meet stricter emissions regulations involves adapting the fuel-injection system to the combustion needs. Active on safety Crash-avoidance technologies are vital "building blocks" to automate commercial vehicles, implement truck platooning and ultimately achieve zero accidents. Engineering with simulation and data Companies are discovering new simulation techniques, especially optimization; the next step is to combine simulation with sensor data and predictive analytics to create even more robust off-highway equipment.

The Best of COMVEC 2016 Autonomous vehicles, improved fuel efficiency and thermal management are among the pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Autonomous solutions in agriculture Pneumatically shifted air suspension loading on 6x2 trucks Optimizing waste heat recovery for long-haul trucks Downsizing a HD diesel engine for off-highway applications Fan-shroud optimization for enhanced thermal performance Touch takes hold, switches lend a hand Touch screens are becoming the norm, but knobs and switches are often used to improve operator comfort. U.S. Army marches toward driverless future TARDEC targets vehicle autonomy with new V2V / V2X test bed in Michigan.

HMIs extend beyond the cab Telematics functions are being integrated into multi-function user interfaces. Standards step forward in design of off-highway electronics Functional safety standards are starting to impact many development projects, while the auto industry's AUTOSAR standard is being deployed to help enable software reuse and simplify designs. Leveraging automotive lightweighting techniques to improve off-highway emissions Where systems engineers can gain efficiencies in off-highway equipment is agnostic, they'll take it anywhere, and so they should, but one of the ways, often underestimated, is through the use of strong and lightweight advanced materials. Waste heat recovery for the long haul A WHR system based on an organic Rankine cycle has been developed for a long-haul Iveco Stralis truck.

Off-highway engines advance beyond Tier 4 With Tier 4 Final/Stage IV needs met, engine OEMs direct their focus and competitive energies toward optimizing competitive solutions. At the same time, they need to keep a weather eye out for future regulations, which many expect. Autonomous vehicle challenges span many fields Many of the challenges faced by military and commercial design teams are similar. Racket busters With a quiet cab at the top of many tractor buyers' wish lists, agricultural equipment manufacturers are pursuing every opportunity possible to shed decibels.

Operators see bright screens in their future HMIs borrow from tablets, phones to help operators perform a broad range of tasks Small engine landscape Kubota engineers developed new small-displacement engines that adopt a common-rail system while optimizing the combustion system and injection characteristics. Sensitive to safety A growing number of digital sensors are among the tools being used to make sure failures are rare and injuries are even more infrequent.

National Instruments Keeping pace with increasingly intelligent machines Molex Autonomous equipment positioned to be next disruptive technology Sauer-Danfoss Speed wins IAV Engineering in the virtual world Mentor Graphics What will save us from electrical system design complexity? Perkins Designing for diversity TTControl Intelligent controls and connectivity Federal-Mogul Technology strategies for the future Dana Innovation that addresses global megatrends dSPACE Can you imagine your life without challenges? Tenneco Technology meets regulatory challenges Southco Shifts in design energy Bosch Rexroth Manufacturing and logistical excellence MathWorks Continuous improvement to meet new challenges

Heavy-duty designs on aftertreatment The introduction of stringent EPA 2015 regulations for locomotive/marine engines and IMO 2016 Tier III marine engines precipitated the need to develop large diesel engine aftertreatment systems. Gaining control of damping Strong nonlinearities of hydraulic systems and the unpredictable operating conditions of the specific application (e.g., uneven ground, varying loads) are the main challenges to the development of satisfactory general vibration damping methods and controls. Getting real about test cycles Fuel consumption of working machines is strongly influenced by machine specification, working environment, and operator behavior, therefore a mix of several test cycles is necessary. The case for Class 8 hybrids Hybrid technology may not be the best solution for all heavy-truck applications, but a Caron Engineering expert explains how it can still benefit Class 8 vehicles.

Oil spatter cooling shows promise in heavy-duty tractor transmissions Research conducted at Tractors and Farm Equipment Ltd. finds a distinct advantage of oil spatter technology over dry clutch technology in severe-duty applications.

The big engine that could With the stringent EPA 2015 regulations on large diesel engines for locomotive, marine, and stationary generator applications, the need for NOx reduction via urea SCR catalyst arises given the proven performance of urea SCR. Monitoring hydraulics Component producers and vehicle service providers offer their views of hydraulic diagnostics as the industry moves toward real-time, intelligent health monitoring, predictive failure software algorithms, and wireless notification. Engine management expands from minute movements to full vehicle Electronic controls grow in complexity as engine designers extend their scope to include hydraulics.

After diesel A look at some offshoots-hybrids, HCCI, and alternative fuels-to the ever-popular diesel engine in the off-highway industry. Software gains (hydraulic) power Development processes are being revised as software becomes a centerpiece of electrohydraulic designs. Virtual sensing gets real As emissions regulations get more strict, emissions measurement must get more precise for onboard diagnostics, engine control, and model-based controller design.

Designing the whole Connecting model-based system engineering through PLM tools to CAD, FEA, and physical test is on the horizon.

Combating complexity with model-based development System and software life-cycle management processes and tools that encompass all phases of the product, from concept to end of life, are essential to meet today's innovation and quality demands.

Look Ma, no driver Unmanned vehicles evolve quickly as processors, sensors improve performance. Calling all hydraulics engineers As the industry knows all too well, hydraulics engineers are hard to come by; a look at how companies are hiring, training, and, most important, retaining engineers. Making diesels quiet and clear Researchers look at the relative influence of gear design parameters on the rattle noise of a diesel engine timing gear train.