Search Results

New Technologies Tackle UAV Challenges Robotic Applique Kits Leverage Existing Assets Educating UGVs Implementing AI Advancements in Thermal Image Training Data Sets Protecting Critical Data on Unmanned Underwater Platforms Advancements Made to the Wingman Software-in-the-Loop (SIL) Simulation: How to Operate the SIL New features include the creation of virtual environments that match real-world gunnery test courses. Soldier-Robot Team Communication: An Investigation of Exogenous Orienting Visual Display Cues and Robot Reporting Preferences The effective use of robots to conduct dangerous missions depends on accurate man-machine communications. Soft Robotic Fish Swims Alongside Real Ones in Coral Reefs GPS Enabled Semi-Autonomous Robot Combining GPS signals with acoustic and encoder data gives a robot the ability to determine its location and orientation within a reference frame.

Beyond VMEbus - A New Concept Taming the Thermal Behavior of Solid-State Military Lasers Solving the Challenge of Thermal Design in Aerospace Electronics Improving Component Life in Abrasive, Corrosive Aerospace Environments New Pulse Analysis Techniques for Radar and EW Validation of Ubiquitous 2D Radar Converting Existing Copper Wire Firing System to a Fiber-Optically Controlled Firing System for Electromagnetic Pulsed Power Experiments Technological improvements make pulsed-power experiments with gunpowder- or air-driven guns safer. Low-Cost Ground Sensor Network for Intrusion Detection COTS-based system could provide increased level of security with less manpower. In-Network Processing on Low-Cost IoT Nodes for Maritime Surveillance Commercially available system of distributed wireless sensors could increase the Navy's intelligence collection footprint.

Designing a High-Speed Decoy Unmanned Aerial Vehicle (UAV) Using Thermoplastics in Aerospace Applications In-Flight Real-Time Avionics Adaptation Using Turbine Flow Meters for Aerospace Test and Measurement Applications Communicating from Space: The Front End of Multiscale Modeling Laser-Based System Could Expand Space-to-Ground Communication Hydraulic Testing of Polymer Matrix Composite 102mm Tube Section Research could lead to development of a composite material that can be processed at a low temperature and still be used at 1000°F. Permeation Tests on Polypropylene Fiber Materials Study attempts to determine if polypropylene nanofiber materials can be used in air filtration systems to remove toxic vapors. Inter-Laboratory Combat Helmet Blunt Impact Test Method Comparison Ensuring consistent test methods could reduce the risk of head injuries.

Multi-Domain Command and Control (MDC2) Changing the Face of Modern Warfare Loop Thermosyphons Gravity-Driven Two-Phase Cooling for the 21st Century CompactPCI Serial Space A New Embedded System Specification Takes on Extreme Environments Plain Bearings for Aerospace Applications Additive Manufacturing Materials for RF Components NASA CubeSats: Pushing the Boundaries of Technology Content Addressable Memory (CAM) Technologies for Big Data and Intelligent Electronics Enabled By Magneto-Electric Ternary CAM New associative memory approach based on the propagation of spikes provides ultra-low energy search operations. Natural DNA-Based Nonvolatile Resistive Switching Memory Reliable memory devices can be realized within a single macromolecule based on natural DNA.

Harley-Davidson's e-bike shocker (video) Is the motorcycle market ready for a Harley-Davidson EV? Project LiveWire was designed to provide answers, said Chief Engineer Jeff Richlen. Airbus has its eye on the future of cleaner flight CleanSky 2 targets are to increase aircraft fuel efficiency enough to reduce CO2 emissions by 20-30% and reduce aircraft NOx and noise emissions by 20-30% compared to newly designed aircraft entering into service in 2014-or essentially halve 2005 CO2 emissions levels by 2050. Soul EV extends the range frontier (video) Specially formulated NCM battery cells are key in giving the vehicle class-leading EV range while enabling engineers to fit a high-energy-density battery pack underfloor with little sacrifice of passenger cabin space.

Argonne heats up Li-ion battery research The U.S. Department of Energy lab near Chicago is using federal stimulus money to dive deeper into lithium battery research. Lithium-ion battery industry moves forward From technology advances to manufacturing capacity expansions, the foundation of the lithium-ion battery industry is becoming stronger and more viable.

Lithium-ion refinement Even as high-profile fires create concern, battery and car makers accelerate their move toward lithium-ion technology with advances in cost, performance, and safety. NASA's quest for maximum efficiency As part of its hybrid body wing aircraft with turboelectric distributed propulsion system, NASA has proposed to use a superconducting and cryogenic electrical system to connect the electrical output of the generators to the motors.

Electrification not a one-size-fits-all solution Efforts in the off-highway industry have been under way for decades, but the technology still faces implementation challenges. SuperTruck redux A year plus into phase two of the promising DOE program to dramatically improve freight efficiency, project leads from three of the participating truck OEMs share their progress thus far and technology paths moving forward. From research to reality Danfoss works closely with off-highway OEMs throughout the development process, testing and demonstrating machines packed with new technology features. Big Data a focus for 2018 SAE President Mircea Gradu Velodyne CQO sees use of Big Data as a way to capitalize on multiple industry trends including vehicle electrification and automated vehicles.

Perkins bets big on smaller engine The new 2600 Series 13-liter engine for off-highway machines will do more with less thanks to variable geometry turbocharging. BorgWarner targets more- sustainable e-motors System optimization and lifecycle analysis are key to taking heavy rare earths out of next-gen motors for commercial EVs. Enhancing digital platforms with CT data analysis TE Connectivity gains critical insights using Volume Graphics software throughout design, simulation and manufacturing.

Steel sector aids sustainability Volvo Group partners with SSAB on 'green steel' for off-highway machines and with Ovako for access to fossil-free hydrogen. CV autonomy: Picking the 'low-hanging fruit' Increasingly automated commercial vehicles offer challenges and opportunities in simulation, data management and standardization. Developing EV-specific lubes As electric-vehicle technology accelerates, dedicated e-fluids are necessary to maintain proper levels of drivetrain performance. Editorial Real-world emphasis on electric Mahle, Liebherr develop active pre-chamber for hydrogen ICE ABS ramps up commercial-vehicle battery-pack assembly Navistar updates A26 engine, improves FE by 4% Bosch debuts new CV-specific electric motor and inverter Western Star adds 'weight sensitive' 47X to vocational lineup Hyundai CE launches next-gen electric forklift Q&A Mahle's Laurent Art discusses thermal-management challenges, solutions for battery and fuel-cell electric commercial vehicles.

Enhancing truck-sensor modularity Kodiak Robotics' fifth-generation sensor stack and new SensorPods boost sensor and GPU performance and improve power efficiency. Bosch high on hydrogen The supplier is committed to all facets of the H2 economy as volume production of its power module kicks off for Nikola's Class 8 fuel-cell truck. Constructing bus structures with stainless steel Outokumpu and collaborators show a possible weight reduction of up to 35% by using high-strength stainless steel in place of carbon steel. Volta Zero is U.S. bound The startup plans to apply lessons learned in Europe to the U.S. market, bringing a "small fleet" of electric trucks for potential customers by the end of the year.

Material selection for battery enclosures Mass reduction is the main reason BEV makers choose aluminum for battery enclosures, but cost and thermal requirements favor steel and polymer composites. Startup targets medium-duty EVs Atlis Motors purpose-engineers nearly all the vital components for an electric pickup and platform capable of spanning several market segments. High-voltage hybrids FEV engineers evaluate 48V and high-voltage parallel hybrid architectures for Class 6-7 commercial vehicles. Certain setups show more promise than others. Hemphill's mission: Support the innovation ecosystem Schaeffler America CTO Jeff Hemphill brings impressive technical chops and well-honed communication skills to his new role as 2021 SAE International president.

The Best of COMVEC 2016 Autonomous vehicles, improved fuel efficiency and thermal management are among the pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Autonomous solutions in agriculture Pneumatically shifted air suspension loading on 6x2 trucks Optimizing waste heat recovery for long-haul trucks Downsizing a HD diesel engine for off-highway applications Fan-shroud optimization for enhanced thermal performance Touch takes hold, switches lend a hand Touch screens are becoming the norm, but knobs and switches are often used to improve operator comfort. U.S. Army marches toward driverless future TARDEC targets vehicle autonomy with new V2V / V2X test bed in Michigan.

Heavy-duty composite brake crack prediction Engineers used both analytical and dynamometer data to determine the damage tolerance of a selectively reinforced aluminum MMC brake drum, which provided some answers but left a lot of questions.

Enlisting aluminum The need for lighter weight and better efficiency has led to oncreased application of aluminum armor plate for military vehicles.

A quiet revolution Optimizing design, while minimizing NVH, in off-highway equipment and systems. Inferential sensing Engineers propose an onboard electronics hardware and software architecture that can deliver condition-based maintenance solutions in a low-cost platform. Lightweight but heavy duty A look at the design, analysis, testing, and application engineering performed to develop a selectively reinforced brake drum made of aluminum metal matrix composite. Shifting gears smoothly Ric Kleine, a 30-year veteran of Cummins Inc. and former SAE Commercial Vehicle VP, seeks continuity over change as he moves into SAE's driver's seat.

Cold metal transfer process picks up heat CMT, with its unique characteristics, is a process that was designed particularly for welding of thin materials while achieving high quality standards.

Still need steel? The use of ultra-high-strength steels is on the rise in a number of industries, including off-highway. But many alternatives are being considered, driven by the need of companies to be environmentally friendly.

Hydrogen possibilities Using hydrogen in an internal-combustion engine application requires not only a custom-engineered combustion concept, but also optimized operation strategies. Nets catch on Engineers have been slow to adopt networks, but that is changing quickly as electronically controlled engines take hold. Hydraulic matters There is much potential for gain for everyone if OEMs and suppliers work together early in terms of hydraulic system design. Asia hot on new cooling technology Not tied as much to aluminum as is the West, china and Russia are moving fast toward widespread use of copper and brass for radiators. Build, test, teview, and improve SAE 100 Future Look; Frank Perna, Chairman and CEo of MSC. Software writes about his experience in vehicle engineering, testing, and management positions.

Engine electronics come of age Changes in global standards, combined with engineering know-how, have resulted in a new generation of clean, quiet, and efficient engines. Operators are rolling in the chips Microprocessors and sensors are being combined to monitor the way that equipment is being used, then help operators to perform better in that environment. Gaining weight Perkins' influence in the off-highway industry grows as it evolves its global engine lines and expands its presence in the U.S. What's new at CONEXPO-CON/AGG, Part 2 of 2 A preview of some of the products and technologies that will be displayed at this year's event, scheduled March 15-19 in Las Vegas, NV. Engineering a career Off-highway companies are challenged not only by the ever-changing technology landscape, but also by finding the engineering talent to help them succeed in it.