Refine Your Search

Topic

Search Results

Training / Education

The Pillars of Leadership

Anytime
This exciting five-part series focuses on the extensive research, CEO interviews and corporate engagements of Jason Jennings and Laurence Houghton. Their team has observed and documented the lives of successful leaders. Now these ideas, and valuable practices, have been converted to high-impact elearning as a “Front Row Seat” for managers and leaders – especially new managers and leaders who have great knowledge and technical ability but have not had the opportunity to learn “first hand” from the best in the world.
Training / Education

Tensile Testing

Anytime
This online course teaches about tensile testing of metals with a focus on how the testing is performed and tensile properties are measured. It includes one module followed by a quiz.
Training / Education

Surface Texture Specification and Control

Surface texture is one of the most important topics in today"s world of design, development and performance. As tolerances are shrinking and performance demands are increasing, surface texture is rapidly becoming one of the most important aspects of engine and vehicle performance. Every moving component on a vehicle or engine is influenced by surface texture in one or more of the following ways: vibration, sealing, adhesion, traction, emissions, safety, durability, wear/failure analysis. Many of the industry"s top warranty issues (leaks, noise, vibration, etc.) are a direct result of surface texture implications.
Training / Education

Principles of Metallurgy

Anytime
This online course teaches the basic microscopic structures present inside of metals, how these structures and metal composition influence metal strength, and how these structures can be modified using common manufacturing processes to obtain specific mechanical properties. Several examples are presented to demonstrate how common alloying and manufacturing methods are used to modify the microscopic structures and properties of metals. It includes twelve modules that are five to 25 minutes in length, followed by a quiz.
Training / Education

Polymers Bundle

Anytime
Polymers are thermoplastic, meaning that once the polymer is formed, it can be heated and reformed repeatedly. Both synthetic and natural polymers play an essential role because of their broad range of properties. Polymers are relatively low-cost and allow for a wide range of characteristics and colors. Polymers can be both thermal and electrical insulators and very resistant to chemicals. The following five on-demand courses are included in the Polymers bundle.  Each course is approximately one-hour in duration. See Topics/Outline for additional details.
Training / Education

Performance and Use of Polymer Plain Bearings in Transmission Design Web Seminar RePlay

Anytime
As part of a broad transmission design philosophy, the understanding and application of tribological systems is critical. The number of interacting surfaces within a modern automotive transmission continues to increase, while the demands on the system continue to press the limits of traditional technologies. The understanding of each surface interaction within the greater system becomes increasingly important as each component is asked to do more to benefit the overall system. This short course will present the tribological performance of polymeric plain bearings as related to transmission applications.
Training / Education

Out-Innovate the Competition

Anytime
Well-intentioned leaders, in their attempts to boost innovation, are inadvertently destroying it. Based on Stephen Shapiro’s bestselling book, Best Practices are Stupid: Ways to Out-Innovate the Competition, this online learning experience offers counterintuitive yet proven strategies for boosting innovation and making it a repeatable, sustainable, and profitable process. He teaches that innovation isn't just about generating occasional new ideas; it's about staying consistently one step ahead of the competition.
Training / Education

Nonferrous Metals Bundle

Anytime
Nonferrous materials are malleable, are non-magnetic, and have no iron content which gives them higher resistance to rust and corrosion. The following five on-demand courses are included in the Nonferrous Metals bundle.  Each course is approximately one-hour in duration. See Topics/Outline for additional details. Introduction to Physical Properties  This course provides an an overview of manufacturing materials and their physical properties, including thermal, electrical, and magnetic properties and introduces volumetric characteristics, such as mass, weight, and density.
Training / Education

Nickel Metal Hydride (NiMH) Hybrid Battery Systems

Anytime
This course from SAE International training partner, FutureTech*, is a MUST for everyone servicing hybrid vehicles. NiMH battery systems continue primary battery technology in hybrid vehicles and have been since the 2000 model year. If a technical professional doesn’t know the fundamentals of NiMH operation it is impossible for them to perform a solid diagnosis or repair. This course will concentrate on the NiMH technology, how it performs as it ages, how it can effect vehicle performance and fuel economy, and how to test it by using a scan tool.
Training / Education

Modern Fluids for Internal Combustion Engines An Overview

Lubricating fluids are the lifeblood of modern engines, performing numerous vital functions from reducing system friction, temperature, and fuel consumption to minimizing tailpipe emissions. This comprehensive seminar covers the latest developments in lubricating fluids technologies and explores the relationships between lubricating fluids and emissions, after-treatment devices, bio-fuels, and fuel economy. Fundamentals of crankcase lubrication, including the properties and performance requirements of global base stocks and lubricants will be covered.
Training / Education

Metals Bundle

Anytime
Almost 75% of all elements are metals. Metals can be classified as either ferrous or non-ferrous and generally conduct electricity and heat well. Most metals are malleable and ductile and are, in general, heavier than other elemental substances.The following six on-demand courses are included in the Materials bundle.  Each course is approximately one-hour in duration. See Topics/Outline for additional details.
Training / Education

Metallurgy of Steel: Principles

Anytime
This online course teaches the phases and microstructures that form in steels, their effects on steel properties, the microstructure changes that occur when steel is heated and cooled, the effects of carbon content and cooling rate on the microstructures that form. Also, how to read the iron-carbon phase diagram will be discussed. All this information is applicable to understanding the effects of steel heat treating processes and heat treating process parameters on the microstructure and properties of heat treated plain carbon, low-alloy, and tools steels. The course is divided into six modules followed by a quiz.
Training / Education

Metallurgy of Precipitation Strengthening

Anytime
This online course teaches about the microscopic changes that take place in a precipitation strengthened alloy and their effects on the properties of the alloy. The effects of the different heat treating steps (solution treatment, quench, and aging) and heat treating process parameters (solution treatment temperature and time, quench rate, and aging temperature and time) on the alloy microstructure and the effects on alloy strength are discussed. The course is divided into five modules followed by a quiz.
Training / Education

Materials Degradation in Mechanical Design: Wear, Corrosion, Fatigue and their Interactions Web Seminar RePlay

Anytime
Materials degradation from environmental conditions is a common factor that will often occur in mechanical equipment used in every type of environment. These processes can frequently materialize in unpredicted and harmful ways, especially when they interact and lead to early component damage or failure. Captured from five, two-hour sessions, this course summarizes the mechanisms that cause materials and mechanical components to degrade in service through exposure to deleterious mechanical and environmental conditions.
Training / Education

Introduction to Rubber Science and Technology

Rubber – a loosely cross-linked network of polymer chains that when strained to high levels will forcibly return to at or near it original dimensions. This course is designed to provide the participant with a thorough understanding of rubber’s engineering characteristics. This class will introduce the various sources of rubber, both natural and synthetic. The class will contrast the differences between rubber and plastics; including thermoplastic rubber. Detailed discussions on how to select the correct rubber polymer for the application, highlighting the pros and cons of each major rubber type.
Training / Education

Introduction to Materials Bundle

Anytime
The following six on-demand courses are included in the Introduction to Materials bundle.  Each course is approximately one-hour in duration. See Topics/Outline for additional details. Introduction to Physical Properties  This course provides an an overview of manufacturing materials and their physical properties, including thermal, electrical, and magnetic properties and introduces volumetric characteristics, such as mass, weight, and density.
Training / Education

High Temperature Materials Bundle

Anytime
Metals and alloys all have different melting ranges depending on their chemistry. High temperature metals are much harder at room temperature, have exceptionally high melting points (usually above 2000 degree Celsius), and are resistant to wear, corrosion and deformation. The following five on-demand courses are included in the High Temperature Materials bundle.  Each course is approximately one-hour in duration. See Topics/Outline for additional details.
Training / Education

Hardness Testing

Anytime
This online course focuses on Rockwell and Brinell hardness testing and Vickers and Knoop microhardness testing. Participants will learn about how the tests are performed, test sample requirements, test parameter selection, and testing requirements. The course can be completed in 30 minutes.
Training / Education

Fuel Systems Material Selection and Compatibility with Alternative Fuels

2019-11-19
This course will introduce the participants to the factors governing fuel-material compatibility and methods to predict and empirically determine compatibility for new alternative fuel chemistries.  By understanding the mechanisms and factors associated with chemically-induced degradation, participants will be able to assess the impact of fuel chemistry to infrastructure components, including those associated with vehicle fuel systems.  This course is unique in that it looks at compatibility from a fuel chemistry perspective, especially new fuel types such as alcohols and other biofuels. 
Training / Education

Fluids for Aerospace Hydraulic Systems

This four-hour short course provides an introduction to fluids for aerospace hydraulic systems. Topics covered include an introduction to basics fluid properties, rheology, tribology, and fluid product development. In addition, the history and performance of different classes of fluids are discussed in detail, and specific failure modes such as erosion and sludge formation will be described. Along with an introduction to fluid degradation, information on used oil analysis test methods and interpretation will be provided.
X