Refine Your Search

Date

Date

Topic

Topic

Corrosion Defense industry Standard Bodies and Structures Planning / scheduling A-20B Exterior Lighting Committee Bulkheads

Search Results

Viewing 1 to 20 of 49
123Next >Last >>
Sort by title
Standard

Wing Inspection Lights – Design Criteria
2018-10-10
HISTORICAL
ARP4087C
This SAE Aerospace Recommend Practice (ARP) is intended to cover the external lights on fixed wing aircraft for illuminating the wing leading edge and engine nacelles and the upper surfaces of the wing. The addition of an ice detection system should be implemented when the areas to inspect are not visible from the aircraft cockpit. It is not intended that this Recommended Practice require the use of any particular light source such as Halogen, LED or other specific design of lamp.
Standard

Wing Inspection Lights - Design Criteria
2006-09-12
HISTORICAL
ARP4087B
This SAE Aerospace Recommend Practice (ARP) is intended to cover the external lights on fixed wing aircraft for illuminating the wing leading edge and nacelles and the upper surfaces of the wing. The addition of ice detection system should be implemented when the areas to inspect are not visible from the aircraft cockpit.
Standard

Wing Inspection Lights - Design Criteria
2023-02-06
CURRENT
ARP4087D
This SAE Aerospace Recommend Practice (ARP) is intended to cover the external lights on fixed wing aircraft for illuminating the wing leading edge and engine nacelles and the upper surfaces of the wing. The addition of an ice detection system should be implemented when the areas to inspect are not visible from the aircraft cockpit. It is not intended that this recommended practice require the use of any particular light source such as halogen, LED, or other specific design of lamp.
Standard

WING INSPECTION LIGHTS - DESIGN CRITERIA
1988-10-01
HISTORICAL
ARP4087
This ARP is intended to cover the external lights on fixed wing aircraft for illuminating the wing leading edge and nacelles so that they may be visually inspected by the crew of the aircraft at night.
Standard

WING INSPECTION LIGHTS - DESIGN CRITERIA
1996-04-01
HISTORICAL
ARP4087A
This SAE Aerospace Recommend Practice (ARP) is intended to cover the external lights on fixed wing aircraft for illuminating the wing leading edge and nacelles and the upper surfaces of the wing.
Standard

Some Factors Affecting Visibility of Aircraft Navigation and Anticollision Lights
2023-09-08
WIP
AIR1106C
The scope of this SAE Aerospace Information Report (AIR) is to discuss factors affecting visibility of aircraft navigation and anticollision lights, enabling those concerned with their use to have a better technical understanding of such factors, and to aid in exercising appropriate judgment in the many possible flight eventualities.
Standard

Some Factors Affecting Visibility of Aircraft Navigation and Anticollision Lights
2004-02-05
HISTORICAL
AIR1106A
The scope of this Aerospace Information Report (AIR) is to discuss factors affecting visibility of aircraft navigation and anticollision lights, enabling those concerned with their use to have a better technical understanding of such factors, and to aid in exercising appropriate judgement in the many possible flight eventualities.
Standard

Some Factors Affecting Visibility of Aircraft Navigation and Anticollision Lights
2018-08-13
CURRENT
AIR1106B
The scope of this SAE Aerospace Information Report (AIR) is to discuss factors affecting visibility of aircraft navigation and anticollision lights, enabling those concerned with their use to have a better technical understanding of such factors, and to aid in exercising appropriate judgment in the many possible flight eventualities.
Standard

Predicting Photometric Degradation of Exterior Aircraft Lights
2019-12-09
CURRENT
ARP6621
This Aerospace Recommended Practice provides guidance for designers and specifiers of aircraft exterior lighting. Typical causes of light degradation and methods of predicting performance degradation in the aircraft environment are given. Although the document considers only exterior lighting, many of the principles and methods discussed apply to interior or flight deck lighting as well.
Standard

Position and Anticollision Lights - Fixed-Wing Aircraft
2023-09-06
WIP
ARP991D
This document recommends design objectives for navigation, position, and anticollisionlight systems for visual detection and collision avoidance between airplanes in flight and on the ground. Customers for new airplanes or lighting components, and designers or manufacturers may take advantage of this document in specifying the initial requirements that, in most cases, significantly exceed the applicable minimum intensities as shown in the Federal Aviation Regulations as well provide better stability, longer life and lower operating costs.
Standard

Position and Anticollision Lights - Fixed-Wing Aircraft
2017-11-09
CURRENT
ARP991C
This document covers the recommended lighting performance and design criteria for: a Left Forward Navigation Position Lights (Red) b Right Forward Navigation Position Lights (Green) c Rear Navigation Position Lights (White) d Anticollision Lights (1) Red Flashing Lights Top and Bottom Fuselage (2) White Flashing Strobe Lights Wing Tips and/or Tail (3) Red Flashing Beacon Light on Top of Vertical Tail
Standard

POSITION AND ANTICOLLISION LIGHTS - TURBINE POWERED FIXED-WING AIRCRAFT
2007-03-09
HISTORICAL
ARP991B
This document covers the recommended lighting performance and design criteria for: a Left Forward Navigation Position Lights (Red) b Right Forward Navigation Position Lights (Green) c Rear Navigation Position Lights (White) d Anticollision Lights (1) Red Flashing Lights Top and Bottom Fuselage (2) White Flashing Lights Wing Tips and/or Tail
Standard

POSITION AND ANTI-COLLISION LIGHTS-TRANSPORT CATEGORY AIRPLANES
1983-05-01
HISTORICAL
ARP991A
This ARP covers the recommended lighting performance and design criteria for: (a) Left Forward Navigation Position Lights (Red) (b) Right Forward Navigation Position Lights (Green) (c) Rear Navigation Position (White) (d) Anti-Collision Lights (Red and/or White Flashing)
Standard

POSITION AND ANTI-COLLISION LIGHTS - SST
1967-10-31
HISTORICAL
ARP991
This ARP covers the recommended lighting performance and design criteria for: (a) Left Forward Position Lights (Red) (b) Right Forward Position Lights (Green) (c) Rear Position Lights (White) (d) Anti-Collision Lights (Red or White Flashing)
Standard

Optical Simulation and Analysis for Aircraft Lighting
2022-06-27
CURRENT
ARP6833
This document contains guidance for designers, specifiers, regulatory personnel, purchasers, managers, and others who specify or use optical simulations of aircraft lights. All aircraft lighting will be considered interior, flight deck, and exterior lighting. Guidance on standard methods of analysis and presentation of data will be provided. Although this document concentrates on lighting, many of the principles covered will be helpful in other types of optical simulation, such as for displays, non-visible radiation, etc.
Standard

Minimum Performance Standard for Anticollision Light Systems
2004-01-30
HISTORICAL
AS8017B
This Aerospace Standard will define minimum light intensity in terms of "effective intensity" as defined in paragraph 3.5 of this standard and specified vertical and horizontal directions about the longitudinal and vertical axis of the airplane. It will also define flash rate and color for the anticollision light system.
Standard

Minimum Performance Standard for Aircraft Position Lights
2022-02-02
CURRENT
AS8037D
This SAE Aerospace Standard (AS) establishes minimum performance standards for new equipment position lights. This SAE Aerospace Standard (AS) defines minimum and maximum light intensity in terms of candelas in vertical and horizontal directions about the longitudinal, vertical, and lateral axes of the aircraft. It also defines color tolerances in terms of limiting chromaticities for the light emitted from the position lights. It is not intended that this standard require the use of any particular light source such as quartz-halogen, incandescent, or any other specific design of lamp.
Standard

MINIMUM PERFORMANCE STANDARD FOR ANTICOLLISION LIGHT SYSTEMS
1978-01-01
HISTORICAL
AS8017
This Aerospace Standard will define minimum light intensity in terms of "effective intensity" as defined in paragraph 3.5 of this standard and specified vertical and horizontal directions about the longitudinal and vertical axis of the airplane. It will also define flash rate and color for the anticollision light system.
123Next >Last >>
X