Refine Your Search

Date

Date

Topic

Topic

Exhaust systems Parts and Components On-board energy sources Human Factors and Ergonomics Jet fuel HFTC1, Controls, Visibility, Anthropometrics, Accessibility Standard

Search Results

Viewing 1 to 20 of 30
12Next >Last >>
Sort by title
Standard

Operator’s Field of View - Engineering Evaluation
2013-11-13
CURRENT
J2331_201311
This SAE Standard specifies a stationary test method for determining and documenting the masking effect caused by parts of the base machine with equipment as specified by the manufacturer within a visibility test circle around the eye position of a seated operator. It applies to earthmoving machinery which has a specific seated operator’s position.
Standard

Operator Controls—Off-Road Machines
2003-03-12
HISTORICAL
J1814_200303
General criteria are presented as guidelines for: control device location, resistance, and actuation of hand and foot controls by the machine's operator. The criteria are based upon physical limitations as defined by human factors engineering principles.
Standard

Operator Controls on Industrial Equipment
2002-12-18
HISTORICAL
J297_200212
This SAE Standard is intended to improve operator efficiency and convenience by providing guidelines for the uniformity of location and direction of motion of operator controls used on industrial wheeled equipment. The controls covered are those centrally located at the operator's normal position.
Standard

Operator Controls on Industrial Equipment
2013-07-09
CURRENT
J297_201307
This SAE Standard is intended to improve operator efficiency and convenience by providing guidelines for the uniformity of location and direction of motion of operator controls used on industrial wheeled equipment. The controls covered are those centrally located at the operator's normal position.
Standard

Operator Controls for Graders
2014-06-26
CURRENT
J1071_201406
This SAE Standard covers the relative position and direction of motion of controls which influence the movement of the machine and the operating direction only of equipment controls. There is no intention to eliminate or restrict the use of combination controls, automatic controls, or special operating controls. Purpose This document is intended as a guide for designing uniform operator controls for graders. Graders are defined in SAE J/ISO 6165.
Standard

Operator Controls for Graders
2003-01-24
HISTORICAL
J1071_200301
This SAE Standard covers the relative position and direction of motion of controls which influence the movement of the machine and the operating direction only of equipment controls. There is no intention to eliminate or restrict the use of combination controls, automatic controls, or special operating controls.
Standard

Operator Controls - Off-Road Machines
2020-05-22
CURRENT
J1814_202005
General criteria are presented as guidelines for: control device location, resistance, and actuation of hand and foot controls by the machine’s operator. The criteria are based upon physical limitations as defined by human factors engineering principles.
Standard

Operator Controls - Off-Road Machines
2012-08-20
HISTORICAL
J1814_201208
General criteria are presented as guidelines for: control device location, resistance, and actuation of hand and foot controls by the machine’s operator. The criteria are based upon physical limitations as defined by human factors engineering principles.
Standard

OPERATOR CONTROLS—OFF-ROAD MACHINES
1993-02-01
HISTORICAL
J1814_199302
General criteria are presented as guidelines for: control device location, resistance, and actuation of hand and foot controls by the machine's operator. The criteria are based upon physical limitations as defined by human factors engineering principles.
Standard

OPERATOR CONTROLS ON INDUSTRIAL EQUIPMENT
1994-08-01
HISTORICAL
J297_199408
This SAE Standard is intended to improve operator efficiency and convenience by providing guidelines for the uniformity of location and direction of motion of operator controls used on industrial wheeled equipment. The controls covered are those centrally located at the operator's normal position.
Standard

OPERATOR CONTROLS FOR GRADERS–SAE J1071
1977-06-01
HISTORICAL
J1071_197706
This recommended practice covers the relative position and direction of motion of controls which influence the movement of the machine and the operating direction only of equipment controls.
Standard

OPERATOR CONTROLS FOR GRADERS
1985-06-01
HISTORICAL
J1071_198506
This standard covers the relative position and direction of motion of controls which influence the movement of the machine and the operating direction only of equipment controls. There is no intention to wliminate or restrict the use of combination controls, automatic controls, or special operating controls.
Standard

Human Physical Dimensions
2003-05-29
CURRENT
J833_200305
This SAE Recommended Practice defines the worldwide human physical dimensions to be used in construction, general purpose industrial, agricultural tractors, forestry and specialized mining machinery categories as defined in SAE J1116 JUN86.
Standard

HUMAN PHYSICAL DIMENSIONS
1989-05-01
HISTORICAL
J833_198905
This SAE Recommended Practice defines the worldwide human physical dimensions to be used in construction, general purpose industrial, agricultural tractors, forestry and specialized mining machinery categories as defined in SAE J1116 JUN86.
Standard

Earthmoving Machinery—Operator’s Field of View
2003-03-30
HISTORICAL
J1091_200303
This SAE Standard specifies a stationary test method for determining the masking effect caused by parts of the base machine with equipment as specified by the manufacturer on a visibility test circle around the machine from the eye position point of a seated operator. It specifies a method for evaluating the maskings that may be present. It applies to earthmoving machines which have a specific operator’s station. It does not consider evaluation of maskings which may be present with operational movement of working tools.
Standard

Earthmoving Machinery - Operator’s Field of View
2013-11-13
CURRENT
J1091_201311
This SAE Standard specifies a stationary test method for determining the masking effect caused by parts of the base machine with equipment as specified by the manufacturer on a visibility test circle around the machine from the eye position point of a seated operator. It specifies a method for evaluating the maskings that may be present. It applies to earthmoving machines which have a specific operator’s station. It does not consider evaluation of maskings which may be present with operational movement of working tools.
Standard

EARTHMOVING MACHINERY—OPERATOR’S FIELD OF VIEW
1996-11-01
HISTORICAL
J1091_199611
This SAE Standard specifies a stationary test method for determining the masking effect caused by parts of the base machine with equipment as specified by the manufacturer on a visibility test circle around the machine from the eye position point of a seated operator. It specifies a method for evaluating the maskings that may be present. It applies to earthmoving machines which have a specific operator’s station. It does not consider evaluation of maskings which may be present with operational movement of working tools.
12Next >Last >>
X