Refine Your Search

Topic

Search Results

Standard

Technical Publications for Off-Road Work Machines

1985-09-01
HISTORICAL
J920_198509
This recommended practice is to assist in the development of Technical Publications which will stress injury prevention and uniformity of format and content. This recommended practice is intended to be a guideline for technical publications based upon current knowledge, the state-of-the-art, and prevailing requirements.
Standard

Technical Publications for Off-Road Self-Propelled Work Machines

2013-10-29
CURRENT
J920_201310
This Recommended Practice applies to technical publications which present instructions for the proper unloading, set-up, installations, pre-delivery inspection, operation, and servicing of off-road self-propelled work machines as categorized in SAE J1116. Advertising/marketing and other pre-purchase publications are not included.
Standard

Oil Change System for Quick Service of Off-Road Self-Propelled Work Machines

2012-05-02
CURRENT
J1069_201205
This recommended practice deals with sizes, design considerations, and practices related to evacuating and refilling by positive means any oil comportment. This practice may also be applicable to other fluid compartments and is to supplement rather than eliminate the drain plug. (Ref. ISO TC 131/4/N27)
Standard

Oil Change System for Quick Service of Off-Road Self-Propelled Work Machines

1981-06-01
HISTORICAL
J1069_198106
This SAE Recommended Practice is to outline those procedures and practices which govern the use of an oil change system for quick service of construction and industrial machines as defined in SAE J1116. It will allow owners of a variety of machines to standardize on the quick-disconnect coupling system of their choice. This recommended practice deals with sizes, design considerations, and practices related to evacuating and refilling by positive means any oil compartment. This practice may also by applicable to other fluid compartments and is to supplement rather than eliminate the drain plug. (Ref. ISO TC 131/4/N27.)
Standard

Oil Change System for Quick Service of Off-Road Self-Propelled Work Machines

2007-03-20
HISTORICAL
J1069_200703
This SAE Recommended Practice is to outline those procedures and practices which govern the use of an oil change system for quick service of construction and industrial machines as defined in SAE J1116. It will allow owners of a variety of machines to standardize on the quick-disconnect coupling system of their choice. This recommended practice deals with sizes, design considerations, and practices related to evacuating and refilling by positive means any oil compartment. This practice may also by applicable to other fluid compartments and is to supplement rather than eliminate the drain plug. (Ref. ISO TC 131/4/N27.)
Standard

NomenclatureÑIndustrial Tractors (General Purpose Wheel)

1985-10-01
HISTORICAL
J1092_198510
This SAE Standard provides names of major components peculiar to tractors (wheel) as referred to in SAE J1116 under Section 2: SELF-PROPELLED GENERAL PURPOSE INDUSTRIAL MACHINES. Illustrations are shown in Figure 1. Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

NomenclatureÑIndustrial Tractors (General Purpose Wheel)

1986-06-01
HISTORICAL
J1092_198606
This SAE Standard provides names of major components peculiar to tractors (wheel) as referred to in SAE J1116 under Section 2: SELF-PROPELLED GENERAL PURPOSE INDUSTRIAL MACHINES. Illustrations are shown in Figure 1. Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

NomenclatureÑIndustrial Tractors (General Purpose Wheel)

1977-06-01
HISTORICAL
J1092_197706
This SAE Standard provides names of major components peculiar to tractors (wheel) as referred to in SAE J1116 under Section 2: SELF-PROPELLED GENERAL PURPOSE INDUSTRIAL MACHINES. Illustrations are shown in Figure 1. Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

NomenclatureÑIndustrial Tractors (General Purpose Wheel)

2003-05-13
CURRENT
J1092_200305
This SAE Standard provides names of major components peculiar to tractors (wheel) as referred to in SAE J1116 under Section 2: SELF-PROPELLED GENERAL PURPOSE INDUSTRIAL MACHINES. Illustrations are shown in Figure 1. Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

Nomenclature--Industrial Tractors (General Purpose Wheel)

1993-08-01
HISTORICAL
J1092_199308
This SAE Standard provides names of major components peculiar to tractors (wheel) as referred to in SAE J1116 under Section 2. SELF-PROPELLED GENERAL PURPOSE INDUSTRIAL MACHINES. Illustrations of components are not intended to be exactly descriptive of any particular machine.
Standard

Mounting Flanges for Engine Accessory Drives

2011-12-06
CURRENT
J896_201112
This SAE Recommended Practice shows mounting flange dimensions for engine accessory drives such as pulleys, extended shaft flanges, and coupling halves.
Standard

Mounting Flanges for Engine Accessory Drives

1983-05-01
HISTORICAL
J896_198305
This SAE Recommended Practice shows mounting flange dimensions for engine accessory drives such as pulleys, extended shaft flanges, and coupling halves.
Standard

Minimum Service Access Dimensions for Off-Road Machines

1993-06-01
J925_199306
This SAE Standard pertains to off-road, self-propelled work machines as defined in categories one through five of SAE J1116. It is intended to provide engineers and designers with information in order that access openings provided in equipment and machinery for purposes of inspection, adjustment and maintenance are made large enough for the intended function by the person in the field or shop.
Standard

Minimum Service Access Dimensions for Off-Road Machines

1987-12-01
J925_198712
This SAE Standard pertains to off-road, self-propelled work machines as defined in categories one through five of SAE J1116. It is intended to provide engineers and designers with information in order that access openings provided in equipment and machinery for purposes of inspection, adjustment and maintenance are made large enough for the intended function by the person in the field or shop.
Standard

Minimum Service Access Dimensions for Off-Road Machines

1984-06-01
J925_198406
This SAE Standard pertains to off-road, self-propelled work machines as defined in categories one through five of SAE J1116. It is intended to provide engineers and designers with information in order that access openings provided in equipment and machinery for purposes of inspection, adjustment and maintenance are made large enough for the intended function by the person in the field or shop.
Standard

Minimum Service Access Dimensions for Off-Road Machines

1984-10-01
J925_198410
This SAE Standard pertains to off-road, self-propelled work machines as defined in categories one through five of SAE J1116. It is intended to provide engineers and designers with information in order that access openings provided in equipment and machinery for purposes of inspection, adjustment and maintenance are made large enough for the intended function by the person in the field or shop.
Standard

Maintenance Interval Chart

2018-09-25
WIP
J753
Instructions on this chart are intended to be used as a ready reference by personnel responsible for servicing off-road self-propelled work machines described in SAE J1116, categories 1, 2, 3, and 4. Detailed maintenance and service guidelines are reserved for maintenance, operator, and lubrication manuals as defined in SAE J920.
Standard

Maintenance Interval Chart

1982-06-01
HISTORICAL
J753_198206
Instructions on this chart are intended to be used as a ready reference by personnel responsible for servicing off-road self-propelled work machines described in SAE J1116, categories 1, 2, 3, and 4. Detailed maintenance and service guidelines are reserved for maintenance, operator, and lubrication manuals as defined in SAE J920.
X