Refine Your Search

Date

Date

Topic

Topic

Standard Defense industry Propellers and rotors Bodies and Structures Planning / scheduling OPTC3, Lighting and Sound Committee Interiors, Cabins, and Cockpits

Search Results

Viewing 1 to 20 of 35
12Next >Last >>
Sort by title
Standard

Sound Measurement—Off-Road Work Machines—Operator—Singular Type
2009-01-13
HISTORICAL
J919_200901
This SAE Standard sets forth the instrumentation and procedure to be used in measuring sound pressure levels at the operator position for self-propelled off-road work machines as defined in SAE J1116. This document does not address the operation of safety devices such as backup alarms, horns, or accessories. This SAE document is applicable to machines that have operator stations where the operator can either stand or sit and will be either transported by, or walk with the machine during its operation. The sound levels obtained using this procedure are repeatable and representative of the higher range of sound levels generated by machines under actual field operating conditions. Due to variability of field operating conditions, this data is not intended to be used for operator noise exposure evaluations.
Standard

Sound Measurement—Off-Road Self-Propelled Work Machines Operator-Work Cycle
2021-03-22
CURRENT
J1166_202103
This SAE Standard sets forth the procedures to be used in measuring sound levels and determining the time weighted sound level at the operator's station(s) of specified off-road self-propelled work machines. This document applies to the following work machines which have operator stations as specified in SAE J1116: • Crawler Loader • Grader • Log Skidder • Wheel Loader • Crawler Tractor with Dozer • Pipelayer • Dumper • Wheel Tractor with Dozer • Trencher • Tractor Scraper • Backhoe • Sweeper • Roller/Compactor • Hydraulic Excavator • Pad Foot Wheel Compactor with Dozer • Excavator and Wheel Feller-Buncher The instrumentation requirements and specific work cycles for these machines are described. The method used to calculate the time weighted average sound level at the operator station(s) is specified for Leq(5), or optional exchange rates, during continuous operation in a work cycle representing continuous medium to heavy work.
Standard

Sound Measurement - Off-Road Work Machines - Operator - Singular Type
2013-07-24
CURRENT
J919_201307
This SAE Standard sets forth the instrumentation and procedure to be used in measuring sound pressure levels at the operator position for self-propelled off-road work machines as defined in SAE J1116. This document does not address the operation of safety devices such as backup alarms, horns, or accessories. This SAE document is applicable to machines that have operator stations where the operator can either stand or sit and will be either transported by, or walk with the machine during its operation. The sound levels obtained using this procedure are repeatable and representative of the higher range of sound levels generated by machines under actual field operating conditions. Due to variability of field operating conditions, this data is not intended to be used for operator noise exposure evaluations.
Standard

SEALED LIGHTING UNITS FOR CONSTRUCTION, INDUSTRIAL, AND FOREST MACHINERY
1987-05-01
HISTORICAL
J598_198705
This recommended practice applies to floodlamp, headlamp and general service lamp units intended for use on off-road self-propelled work machines classified as construction (1.1 and 1.2), general purpose industrial (2) and forestry machines (4), as noted on SAE J1116. Construction and Industrial Machinery is normally operated off highways, therefore, this SAE Recommended Practice is not intended to be used as a basis for regulations by those having authority over motor vehicles used on public highways. Other performance and dimensional information is contained in SAE J572 and J760.
Standard

SEALED LIGHTING UNITS FOR CONSTRUCTION AND INDUSTRIAL MACHINERY
1980-04-01
HISTORICAL
J598_198004
This recommended practice applies to floodlamp and headlamp units intended for use on off-highway vehicles and machines generally known as earthmoving equipment. Other performance and dimensional information is contained in SAE J572 and SAE J760.
Standard

Lighting and Marking of Construction, Earthmoving Machinery
2007-01-30
HISTORICAL
J1029_200701
This SAE Standard establishes minimum requirements for lighting and marking earthmoving construction machinery as defined in SAE J1116, 1.1 Self-Propelled Construction Machines—Earthmoving (excluding excavators). (Construction machinery is normally operated off-highway, and therefore this SAE document is not intended to be used as a basis for regulations by those having authority over on-highway motor vehicles.)
Standard

Lighting and Marking of Construction, Earthmoving Machinery
2012-10-09
CURRENT
J1029_201210
This SAE Standard establishes minimum requirements for lighting and marking earthmoving construction machinery as defined in SAE J1116, 1.1 Self-Propelled Construction Machines—Earthmoving (excluding excavators). (Construction machinery is normally operated off-highway, and therefore this SAE document is not intended to be used as a basis for regulations by those having authority over on-highway motor vehicles.)
Standard

Lighting and Marking of Construction, Earthmoving Machinery
2021-04-16
WIP
J1029
This SAE Standard establishes minimum requirements for lighting and marking earthmoving construction machinery as defined in SAE J1116, 1.1 Self-Propelled Construction Machines - Earthmoving (excluding excavators). (Construction machinery is normally operated off-highway, and therefore this SAE document is not intended to be used as a basis for regulations by those having authority over on-highway motor vehicles.)
12Next >Last >>
X