Search Results

Standard

Ø SIZE CLASSIFICATION AND CHARACTERISTICS OF GLASS BEADS FOR PEENING

1988-09-01

HISTORICAL

J1173_198809

This specification covers the characteristics of glass beads used for peening, and provides for standard glass bead size numbers.

Standard

Ø SIZE CLASSIFICATION AND CHARACTERISTICS OF GLASS BEADS FOR PEENING

2019-05-03

CURRENT

J1173_201905

This specification covers the characteristics of glass beads used for peening, and provides for standard glass bead size numbers.

Standard

Test Strip, Holder, and Gage for Shot Peening

2020-02-27

HISTORICAL

J442_202002

This SAE Recommended Practice defines requirements for equipment and supplies to be used in measuring shot peening arc height and other surface enhancement processes. Guidelines for use of these items can be found in SAE J443 and SAE J2597.

Standard

Test Strip, Holder, and Gage for Shot Peening

2019-06-06

HISTORICAL

J442_201906

This SAE standard defines requirements for equipment and supplies to be used in measuring shot peening arc height and other surface enhancement processes. Guidelines for use of these items can be found in SAE J443 and SAE J2597.

Standard

Test Strip, Holder, and Gage for Shot Peening

2022-05-04

CURRENT

J442_202205

This SAE Recommended Practice defines requirements for equipment and supplies to be used in measuring shot peening arc height and other surface enhancement processes. It is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. Guidelines for use of these items can be found in SAE J443 and SAE J2597.

Standard

Test Strip, Holder, and Gage for Shot Peening

2001-12-10

HISTORICAL

J442_200112

This SAE Standard defines requirements for equipment/supplies to be used in measuring shot peening intensity. Guidelines for the use of these articles (test strip, holding fixture, and gage) are also included.

Standard

Test Strip, Holder, and Gage for Shot Peening

2008-11-24

HISTORICAL

J442_200811

This SAE Standard defines requirements for equipment/supplies to be used in measuring shot peening intensity. Guidelines for the use of these articles (test strip, holding fixture, and gage) are also included.

Standard

Test Strip, Holder, and Gage for Shot Peening

2006-05-22

HISTORICAL

J442_200605

This SAE Standard defines requirements for equipment/supplies to be used in measuring shot peening intensity. Guidelines for the use of these articles (test strip, holding fixture, and gage) are also included.

Standard

Test Strip, Holder, and Gage for Shot Peening

2017-08-09

HISTORICAL

J442_201708

This SAE standard defines requirements for equipment and supplies to be used in measuring shot peening arc height and other surface enhancement processes. Guidelines for use of these items can be found in SAE J443 and SAE J2597.

Standard

Test Strip, Holder, and Gage for Shot Peening

2013-02-18

HISTORICAL

J442_201302

This SAE standard defines requirements for equipment and supplies to be used in measuring shot peening arc height and other surface enhancement processes. Guidelines for use of these items can be found in SAE J443 and SAE J2597.

Standard

TEST STRIP, HOLDER, AND GAGE FOR SHOT PEENING

1995-01-01

HISTORICAL

J442_199501

This SAE Standard defines requirements for equipment/supplies to be used in measuring shot peening intensity. Guidelines for the use of these articles (test strip, holding fixture, and gage) are also included.

Standard

Surface Texture Control

2011-08-04

CURRENT

J449_201108

SAE J448, Surface Texture, has been set up for precision reference specimens using a controlled surface profile to obtain reproducible roughness values. These specimens are for instrument calibration. Appropriate symbols for roughness, waviness, and lay have also been standardized (ASA B46.1-1962 and SAE J448). For production control, especially from one geographical location to another, means are required to facilitate the inspection of surface characteristics called for by specifications which include not only roughness but profile waviness and lay. In order to integrate the requirements of the designer with the actual production of surfaces, a second grade of control standards must be adopted which will be functional in nature for the specific product being manufactured. These control standards may be Calibrated Pilot Specimens (actual parts with satisfactory texture) or Roughness Comparison Specimens (ASA B46.1-1962).

Standard

Specifications for Low Carbon Cast Steel Shot

2021-07-07

CURRENT

J2175_202107

This SAE Recommended Practice describes chemical analysis, hardness, microstructure, and physical characteristic requirements for low carbon cast steel shot to be used for shot peening or blast cleaning operations.

Standard

Specifications for Low Carbon Cast Steel Shot

2015-06-18

HISTORICAL

J2175_201506

This SAE Recommended Practice describes chemical analysis, hardness, microstructure, and physical characteristic requirements for low carbon cast steel shot to be used for shot peening or blast cleaning operations.

Standard

SURFACE TEXTURE CONTROL

1963-06-01

HISTORICAL

J449_196306

SAE J448, Surface Texture, has been set up for precision reference specimens using a controlled surface profile to obtain reproducible roughness values. These specimens are for instrument calibration. Appropriate symbols for roughness, waviness, and lay have also been standardized (ASA B46.1-1962 and SAE J448). For production control, especially from one geographical location to another, means are required to facilitate the inspection of surface characteristics called for by specifications which include not only roughness but profile waviness and lay. In order to integrate the requirements of the designer with the actual production of surfaces, a second grade of control standards must be adopted which will be functional in nature for the specific product being manufactured. These control standards may be Calibrated Pilot Specimens (actual parts with satisfactory texture) or Roughness Comparison Specimens (ASA B46.1-1962).

Standard

SURFACE TEXTURE CONTROL

1963-06-01

HISTORICAL

J449A_196306

SAE J448, Surface Texture, has been set up for precision reference specimens using a controlled surface profile to obtain reproducible roughness values. These specimens are for instrument calibration. Appropriate symbols for roughness, waviness, and lay have also been standardized (ASA B46.1-1962 and SAE J448). For production control, especially from one geographical location to another, means are required to facilitate the inspection of surface characteristics called for by specifications which include not only roughness but profile waviness and lay. In order to integrate the requirements of the designer with the actual production of surfaces, a second grade of control standards must be adopted which will be functional in nature for the specific product being manufactured. These control standards may be Calibrated Pilot Specimens (actual parts with satisfactory texture) or Roughness Comparison Specimens (ASA B46.1-1962).

Standard

SPECIFICATIONS FOR LOW CARBON CAST STEEL SHOT

1991-06-01

HISTORICAL

J2175_199106

This SAE Recommended Practice describes chemical analysis, hardness, microstructure, and physical characteristic requirements for low carbon cast steel shot to be used for shot peening or blast cleaning operations.

Standard

SIZE CLASSIFICATION AND CHARACTERISTICS OF GLASS BEADS FOR PEENING

1977-01-01

HISTORICAL

J1173_197701

This SAE Recommended Practice pertains to peening with glass beads, and provides for standard glass bead size numbers.1

Standard

Procedures for Using Standard Shot Peening Test Strip

2003-01-09

HISTORICAL

J443_200301

This SAE Recommended Practice provides uniform procedures for using the standard shot peening test strips reported in SAE J442. Standard test strips are used to establish saturation, determine intensity, monitor repeatability of the shot peening machine operations, and can be used to predict a desired result on a part. It is recommended that the standard test strip A be used for intensities that produce arc heights of 0.10mm A (0.004 inch A) to 0.60 mm A (0.024 inch A). For intensities below 0.10 mm A (0.004 inch A), the standard N strip is recommended, and for intensities above 0.60 mm A (0.024 inch A), the standard C strip is recommended. The process of shot peening, in common with many other processes, cannot at present be adequately controlled by nondestructive inspection of the peened parts, therefore, it is necessary to control the process itself to achieve consistent, reliable results.

Standard

PROCEDURES FOR USING STANDARD SHOT PEENING TEST STRIP

1984-01-01

HISTORICAL

J443_198401

This SAE Recommended Practice provides uniform procedures for using the standard shot peening test strips reported in SAE Standard J442, Test Strip, Holder and Gage for Shot Peening. Standard test strips are used to control repeatability of the shot peening machine operations, and to specify a desired result on a part. It is recommended that the standard test strip A be used for intensities that produce arc heights of 6A to 24A. For intensities below 6A, the standard N strip is recommended, and for intensities above 24A, the standard C strip is recommended. Shot peening is intended to induce surface compressive stresses in metal parts for the purpose of improving resistance to fatigue and stress corrosion cracking. Springs, axles, and aircraft landing gears are typical examples of such parts.