Search Results

Standard

Test Method for Determining Window Fogging Resistance of Interior Trim Materials

1985-02-01

CURRENT

J275_198502

To simulate the formation of a condensate on the inside surface of clear glass when interior trim materials are exposed to an external source of radiant energy. To provide a method of measuring the effect of condensate formation on light transmittance.

Standard

Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials

2002-07-26

HISTORICAL

J912_200207

This test method is designed to indicate the degree of surface tackiness, color transfer, loss of embossment, and surface marring when two trim materials are placed face to face under specific conditions of time, temperature, and pressure. These specific conditions are not dictated in this test procedure but will be found in the material standards which govern each type of trim material to be tested.

Standard

Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials

2007-11-02

HISTORICAL

J912_200711

This test method is designed to indicate the degree of surface tackiness, color transfer, loss of embossment, and surface marring when two trim materials are placed face to face under specific conditions of time, temperature, and pressure. These specific conditions are not dictated in this test procedure but will be found in the material standards which govern each type of trim material to be tested.

Standard

Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials

2012-10-15

HISTORICAL

J912_201210

This test method is designed to indicate the degree of surface tackiness, color transfer, loss of embossment, and surface marring when two trim materials are placed face to face under specific conditions of time, temperature, and pressure. These specific conditions are not dictated in this test procedure but will be found in the material standards which govern each type of trim material to be tested.

Standard

Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials

2023-02-20

CURRENT

J912_202302

This test method is designed to indicate the degree of surface tackiness, color transfer, loss of embossment, and surface marring when two trim materials are placed face to face under specific conditions of time, temperature, and pressure. These specific conditions are not dictated in this test procedure but will be found in the material standards which govern each type of trim material to be tested.

Standard

TEST METHOD FOR DETERMINING BLOCKING RESISTANCE AND ASSOCIATED CHARACTERISTICS OF AUTOMOTIVE TRIM MATERIALS

1994-08-01

HISTORICAL

J912_199408

This test method is designed to indicate the degree of surface tackiness, color transfer, loss of embossment, and surface marring when two trim materials are placed face to face under specific conditions of time, temperature, and pressure. These specific conditions are not dictated in this test procedure but will be found in the material standards which govern each type of trim material to be tested.

Standard

Procedure for Visual Evaluation of Interior and Exterior Automotive Trim

2003-01-30

HISTORICAL

J361_200301

This SAE Recommended Practice applies to parts and materials used in vehicle manufacture which are intended to be acceptable color matches to a specified standard. This document is intended for use with parts or materials which are opaque or nearly so. Materials covered by this document include topcoat paint finishes, interior soft trim, interior and exterior hard trim, and exterior film and flexible trim.

Standard

Procedure for Visual Evaluation of Interior and Exterior Automotive Trim

2010-06-16

HISTORICAL

J361_201006

This SAE Recommended Practice applies to parts and materials used in vehicle manufacture which are intended to be acceptable color matches to a specified standard. This document is intended for use with parts or materials which are opaque or nearly so. Materials covered by this document include topcoat paint finishes, interior soft trim, interior and exterior hard trim, and exterior film and flexible trim.

Standard

Procedure for Visual Evaluation of Interior and Exterior Automotive Trim

2021-12-30

HISTORICAL

J361_202112

This SAE Recommended Practice applies to parts and materials used in vehicle manufacture which are intended to be acceptable color matches to a specified standard. This document is intended for use with parts or materials which are opaque or nearly so. Materials covered by this document include topcoat paint finishes, interior soft trim, interior and exterior hard trim, and exterior film and flexible trim. This practice requires judgments by observers with a minimum of normal color vision and preferably superior as rated with the FM-100 Hue Test as specified in ASTM E1499, Guide for Selection, Evaluation, and Training of Observers.

Standard

Procedure for Visual Evaluation of Interior and Exterior Automotive Trim

2022-10-04

CURRENT

J361_202210

This SAE Recommended Practice applies to parts and materials used in vehicle manufacture which are intended to be acceptable color matches to a specified standard. This document is intended for use with parts or materials which are opaque or nearly so. Materials covered by this document include topcoat paint finishes, interior soft trim, interior and exterior hard trim, and exterior film and flexible trim. This practice requires judgments by observers with a minimum of normal color vision and preferably superior as rated with the FM-100 hue test as specified in ASTM E1499.

Standard

PROCEDURE FOR VISUAL EVALUATION OF INTERIOR AND EXTERIOR AUTOMOTIVE TRIM

1996-04-01

HISTORICAL

J361_199604

This SAE Recommended Practice applies to parts and materials used in vehicle manufacture which are intended to be acceptable color matches to a specified color standard. This document is intended for use with parts or materials which are opaque or nearly so. Materials covered by this document include topcoat paint finishes, interior soft trim, interior and exterior hard trim, and exterior film and flexible trim.

Standard

Outdoor Weathering of Exterior Materials

2022-05-18

CURRENT

J1976_202205

This test method specifies the exposure racks, black boxes, and instrumentation, which shall be used for the outdoor weathering of materials for automotive exterior application.

Standard

OUTDOOR WEATHERING OF EXTERIOR MATERIALS

1989-06-01

HISTORICAL

J1976_198906

This test method specifies the exposure rack(s), black box(es), and instrumentation, which shall be used for the outdoor weathering of materials for automotive exterior applications.

Standard

Glossary of Fiberboard Terminology

2009-04-20

HISTORICAL

J947_200904

This information report presents the terminology and definitions as used in the fiberboard industry.

Standard

Glossary of Fiberboard Terminology

2003-09-25

HISTORICAL

J947_200309

This information report presents the terminology and definitions as used in the fiberboard industry.

Standard

GLOSSARY OF FIBERBOARD TERMINOLOGY

1985-01-01

HISTORICAL

J947_198501

Standard

Flammability of Polymeric Interior Materials - Horizontal Test Method

2019-08-08

CURRENT

J369_201908

This SAE Standard pertains to automotive vehicles and off-road, self-propelled work machines used in construction, general purpose industrial, agriculture, forestry, and specialized mining machinery. This standard does not address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this document to establish safety and health practices and determine the applicability of regulatory limitations prior to use. Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed when conducting this test.

Standard

Flammability of Polymeric Interior Materials - Horizontal Test Method

2013-06-20

HISTORICAL

J369_201306

This SAE Standard pertains to automotive vehicles and off-road, self-propelled work machines used in construction, general purpose industrial, agriculture, forestry, and specialized mining machinery. This standard does not address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this document to establish safety and health practices and determine the applicability of regulatory limitations prior to use. Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed when conducting this test.

Standard

Fiberboard Test Procedure

2004-09-20

HISTORICAL

J315_200409

This SAE Standard provides test methods for determining the critical characteristics of basic or finished fiberboard products. Where applicable, methods of test developed by SAE and ASTM have been referenced.

Standard

Fiberboard Test Procedure

2022-08-26

CURRENT

J315_202208

This SAE Standard provides test methods for determining the critical characteristics of basic or finished fiberboard products. Where applicable, methods of test developed by SAE and ASTM have been referenced.