Search Results

Standard

Wrought and Cast Copper Alloys

2018-01-09

CURRENT

J461_201801

For convenience, this SAE Information Report is presented in two parts as shown below. To avoid repetition, however, data applicable to both wrought and cast alloys is included only in Part 1. Part I—Wrought Copper and Copper Alloys Types of Copper (Table 1) General Characteristics (Table 3) Electrical Conductivity Thermal Conductivity General Mechanical Properties (Table 10) Yield Strength Fatigue Strength Physical Properties (Table 2) General Fabricating Properties (Table 3) Formability Bending Hot Forming Machinability Joining Surface Finishing Color Corrosion Resistance Effect of Temperature Typical Uses (Table 3) Part II—Cast Copper Alloys Types of Casting Alloys Effects of Alloy Elements and Impurities General Characteristics (Table 11) Physical Properties (Table 12) Typical Uses (Table 11)

Standard

Wrought and Cast Copper Alloys

2002-12-20

HISTORICAL

J461_200212

For convenience, this SAE Information Report is presented in two parts as shown below. To avoid repetition, however, data applicable to both wrought and cast alloys is included only in Part 1. Part I—Wrought Copper and Copper Alloys Types of Copper (Table 1) General Characteristics (Table 3) Electrical Conductivity Thermal Conductivity General Mechanical Properties (Table 10) Yield Strength Fatigue Strength Physical Properties (Table 2) General Fabricating Properties (Table 3) Formability Bending Hot Forming Machinability Joining Surface Finishing Color Corrosion Resistance Effect of Temperature Typical Uses (Table 3) Part II—Cast Copper Alloys Types of Casting Alloys Effects of Alloy Elements and Impurities General Characteristics (Table 11) Physical Properties (Table 12) Typical Uses (Table 11)

Standard

Wrought Nickel and Nickel-Related Alloys

2018-02-15

CURRENT

J470_201802

This Report presents general information on over 50 alloys in which nickel either predominates or is a significant alloying element. It covers primarily wrought materials, and is not necessarily all inclusive. Values given are in most cases average or nominal, and if more precise values are required the producer(s) should be contacted. This report does not cover the so-called "superalloys," or the iron base stainless steels. Refer to SAE J467, Special Purpose Alloys, and SAE J405, Chemical Compositions of SAE Wrought Stainless Steels, respectively, for data on these alloys.

Standard

Wire, Electrical, Stranded, Uninsulated Copper, Copper Alloy, or Aluminum, or Thermocouple Extension, General Specification for

2020-09-01

HISTORICAL

AS29606A

This specification covers concentric lay stranded and rope-lay stranded round electrical conductor fabricated from copper, copper alloy or aluminum. This specification also covers thermocouple extension conductor fabricated from nickel/chromium or nickel/aluminum/manganese. The conductors in this specification are suitable for use in insulated wires used in aerospace and other applications.

Standard

Wire, Electrical, Stranded, Uninsulated Copper, Copper Alloy, or Aluminum, or Thermocouple Extension, General Specification For

2014-06-03

HISTORICAL

AS29606

This specification covers concentric lay stranded and rope-lay stranded round electrical conductor fabricated from copper, copper alloy or aluminum. This specification also covers thermocouple extension conductor fabricated from nickel/chromium or nickel/aluminum/manganese. The conductors in this specification are suitable for use in insulated wires used in aerospace and other applications.

Standard

Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-Imide Polymer, or Polyarlyene Insulated, Copper or Copper Alloy

2011-08-11

HISTORICAL

AS81044A

This specification covers single conductor electric wires made as specified in the applicable specification sheet with tin-coated, silver-coated, or nickel-coated copper or copper alloy conductors insulated with crosslinked polyalkene, crosslinked alkane-imide polymer, or polyarylene. The crosslinked polyalkene, crosslinked alkane-imide polymer, or polyarylene may be used alone or in combination with other insulation materials as specified in the specification sheet.

Standard

Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-Imide Polymer, Or Polyarlyene Insulated, Copper Or Copper Alloy

2021-12-02

WIP

AS81044C

AS81044 covers single conductor electric wires made as specified in the applicable detail specification with tin-coated, silver-coated, or nickel-coated copper or copper alloy conductors insulated with crosslinked polyalkene, crosslinked alkane imide polymer, or polyarylene. The crosslinked polyalkene, crosslinked alkane-imide polymer, or polyarylene may be used alone or in combination with other insulation materials as specified in the detail specification.

Standard

Wipes, Cotton, Loosely Woven

2016-09-20

CURRENT

AMS3803A

This specification covers a loosely-woven cotton in the form of wipes supplied in rolls or cut sheets.

Standard

Welding Electrodes, Covered, Steel 0.07 - 0.15C

2017-10-20

CURRENT

AMS5031G

This specification covers a low-carbon steel in the form of covered welding electrodes.

Standard

Welding Electrodes, Covered, Steel 0.07 - 0.15C

2013-09-20

HISTORICAL

AMS5031F

This specification covers a low-carbon steel in the form of covered welding electrodes.

Standard

Welding Electrodes, Covered, Corrosion and Heat Resistant Steel 16.5Cr - 4.5Ni - 2.9Mo - 0.10N

2004-05-27

HISTORICAL

AMS5775D

This specification covers a corrosion and heat resistant steel in the form of covered welding electrodes.

Standard

Webbing, Tubular, Low-Modulus Aramid-54

2016-01-11

HISTORICAL

AMS3799C

This specification covers a low-modulus aramid in the form of tubular webbing.

Standard

Webbing, Tubular, Low-Modulus Aramid-54

2006-01-06

HISTORICAL

AMS3799B

This specification covers a low-modulus aramid in the form of tubular webbing.

Standard

Webbing, Textile, Tubular, Para-Aramid Intermediate Modulus

2012-02-09

CURRENT

AMS3782B

This specification and its supplementary detail specifications cover various types of para-aramid fabric in the form of webbing.

Standard

Webbing, Nylon, Integral Locking Slots

2015-04-13

CURRENT

AMS3797C

This specification covers a nylon in the form of webbing with integral locking slots.

Standard

WROUGHT NICKEL AND NICKEL-RELATED ALLOYS

1976-07-01

HISTORICAL

J470_197607

This Report presents general information on over 50 alloys in which nickel either predominates or is a significant alloying element. It covers primarily wrought materials, and is not necessarily all inclusive. Values given are in most cases average or nominal, and if more precise values are required the producer(s) should be contacted. This report does not cover the so-called "superalloys," or the iron base stainless steels. Refer to SAE J467, Special Purpose Alloys, and SAE J405, Chemical Compositions of SAE Wrought Stainless Steels, respectively, for data on these alloys.

Standard

WROUGHT NICKEL AND NICKEL-RELATED ALLOYS

1976-07-01

HISTORICAL

J470C_197607

This Report presents general information on over 50 alloys in which nickel either predominates or is a significant alloying element. It covers primarily wrought materials, and is not necessarily all inclusive. Values given are in most cases average or nominal, and if more precise values are required the producer(s) should be contacted. This report does not cover the so-called "superalloys," or the iron base stainless steels. Refer to SAE J467, Special Purpose Alloys, and SAE J405, Chemical Compositions of SAE Wrought Stainless Steels, respectively, for data on these alloys.

Standard

WROUGHT AND CAST COPPER ALLOYS

1981-09-01

HISTORICAL

J461_198109

For convenience, this SAE Information Report is presented in two parts as shown below. To avoid repetition, however, data applicable to both wrought and cast alloys is included only in Part 1.

Standard

WROUGHT AND CAST COPPER ALLOYS

1976-03-01

HISTORICAL

J461D_197603

Standard

WRENCH - PROPELLER SHAFT (SHAFT SIZES NO. 40-50-60)

2012-12-05

CURRENT

AS351B