Refine Your Search

Topic

Search Results

Viewing 1 to 13 of 13
Technical Paper

Thermal Design of CryoSat, the first ESA Earth Explorer Opportunity Mission

2003-07-07
2003-01-2467
CryoSat is the first satellite of ESA's Living Planet Programme realised in the framework of the Earth Explorer Opportunity Missions. CryoSat is a radar altimeter mission dedicated to determine trends in the ice masses of the Earth. The overall spacecraft configuration was driven by the budget constraints applicable for the opportunity mission, the high inclination orbit with drifting orbit plane and the stringent stability requirements for the radar altimeter antennas. Innovative thermal design solutions were needed for the following items: The instrument antennas have to comply with very stringent pointing stability requirements. The star trackers need to be mounted at a thermally adverse position and still have to be maintained on low temperature levels.
Technical Paper

The Columbus ECLSS First Year of Operations

2009-07-12
2009-01-2414
The launch and activation of ESA's Columbus module in early 2008 marked the completion of more than 10 years of development. Since then the Columbus ECLS is operating, including its major European ECLSS assemblies such as Condensing Heat Exchanger (CHX), Condensate Water Separator, Cabin Fans and Sensors. The paper will report the experiences from the first year of operations in terms of events, failures and lessons learned. Examples of this is the description of some off-nominal situations (such as Condensate Removal and IMV Return Fan failure, and relevant troubleshooting), and the preparation to Columbus Reduced Condensation Mode, as requested by NASA in order to minimize the crew time needed to empty Condensate Water Tanks in US Lab.
Technical Paper

System Aspects for Humidity Removal under Zero Gravity

2000-07-10
2000-01-2312
The Columbus Orbital Facility (COLUMBUS) is the main European contribution to the ISS. Its Temperature and Humidity Control (THC) subsystem consists of the Condensing Heat Exchanger and Filter Assembly (CHXFA), the Condensate Water Separator Assembly (CWSA) and the Cabin Temperature Control Unit (CTCU). The paper provides a description of the THC subsystem and its equipment focusing on the humidity removal function which has shown to be the major design challenge. Design solutions have been realised by optimising all equipment of the THC with respect to its system needs. Test results both on equipment and on THC subsystem level are presented demonstrating that the humidity removal performance is adequate to meet the system requirements in the wide operational range of COLUMBUS.
Technical Paper

New Developed Space Qualified ECLSS Products for the ISS

2000-07-10
2000-01-2347
In the range of the Columbus Orbital Facility (COL) program, the European contribution to the International Space Station (ISS), DASA Dornier developed and qualified four new supporting devices for the Environmental Control and Live Support System (ECLSS) as listed below: 1. The Vacuum & Venting Pressure Sensor (VVPS). Based on the Pirani principle, it utilizes the pressure dependence of the gas thermal conductivity. 2. The Humidity Sensor (HS) provides information for the Thermal & Humidity Control System (THC). It works according to the dew point principle, guaranteeing a long stability over at least 10 years. 3. The Air Flow Sensor (AFS), working according to the hot wire anemometer principle, is dedicated to identify low air flow conditions. 4. The Waste Gas Line Shut-Off Valve (WLSOV), a DC motor driven ball type vacuum valve, was adapted to the space station requirements (e.g. noise and micro-g).
Technical Paper

Lessons Learned from the METOP Thermal Analysis and Testing

2003-07-07
2003-01-2461
Metop (METeorological OPerational satellite) is a series of three satellites designed to monitor the climate and improve weather forecasting. This paper describes the thermal analysis, thermal testing performed, and relevant lessons learned. For the thermal analysis campaigns it focuses on: exchange and correlation of reduced thermal mathematical models established in various software formats sizes and content of the models, in particular automatic generation of reduced models from the detailed models uncertainties definitions of thermal interfaces The lessons learned from the thermal testing campaigns apply to: selection of test environment, using solar simulation and/or infra-red techniques selection of test cases based on thermal design driving parameters and/or test chamber capabilities adequate instrumentation (i.e. thermocouples, test heaters) for all critical components (un)expected events e.g.
Technical Paper

Development of Automated Transfer Vehicle Cargo Carrier (ATVCC) ECLS Air Distribution System based on the MPLM and COLUMBUS Experience

2001-07-09
2001-01-2389
In 1995 the European Space Agency did award a C/D Contract for the design & development of an ECLS Subsystem for the Multi Purpose Logistics Module (MPLM) to Astrium’s ECLS ‘Center of Competence’ that built the ECLSS for Spacelab already. Actually first MPLM modules were successfully flown to the ISS with the Astrium built ECLSS qualified as ‘excellent’ by the crew having asked permission to sleep in there. In parallel the design and development of an ECLS for Europe’s Columbus module did commence and is actually close to completion. In view of the above a broad set of qualified and even space proven ECLS equipment is now ‘on-hands’ to thoroughly compose respectively derive the ECLS subsystems of future applications e.g. HabModule, CRV and Space Hotel at a limited delta design and validation effort thus fitting into the tighter financial budgets of the manned space programs to come.
Technical Paper

Design Status of the Closed-Loop Air Revitalization System ARES for Accommodation on the ISS

2009-07-12
2009-01-2506
The Closed-Loop Air REvitalisation System ARES is a regenerative life support system for closed habitats. With regenerative processes the ARES covers the life support functions: 1. Removal of carbon dioxide from the spacecraft atmosphere via a regenerative adsorption/desorption process, 2. Supply of breathable oxygen via electrolysis of water, 3. Catalytic conversion of carbon dioxide with hydrogen to water and methane. ARES will be accommodated in a double ISPR Rack which will contain all main and support functions like power and data handling and process water management. It is foreseen to be installed onboard the International Space Station (ISS) in the Columbus Module in 2013. After an initial technology demonstration phase ARES shall continue to operate thus enhancing the capabilities of the ISS Life Support System as acknowledged by NASA [5]. Due to its regenerative processes ARES will allow a significant reduction of water upload to the ISS.
Technical Paper

Design Status of the Closed-Loop Air Revitalization System ARES for Accommodation on the ISS

2007-07-09
2007-01-3252
During the last years extensive work has been done to design and develop the Closed-Loop Air Revitalization System ARES. The potential of ARES e.g. as part of the ISS ECLSS is to significantly reduce the water upload demand and to increase the safety of the crew by reducing dependence on re-supply flights. The design is adapted to the interfaces of the new base lined Russian MLM module as possible location for a future installation of ARES. Due to the lack of orbital support equipment and interfaces to a waste water bus, to a feed water supply line and due to the availability of only one single vent line it was necessary to make the ARES process water loop as independent as possible from the host vehicle. Another optimization effort was to match the CO2 desorption profile with the available hydrogen flow to achieve a sufficient water recovery performance, while meeting all related safety requirements, minimizing complexity and improving reliability.
Journal Article

Design Status of the Closed-Loop Air Revitalization System ARES for Accommodation on the ISS

2008-06-29
2008-01-2189
1 The Closed-Loop Air REvitalisation System ARES is a proof of technology Payload. The objective of ARES is to demonstrate with regenerative processes: the provision of the capability for carbon dioxide removal from the module atmosphere, the return supply of breathable oxygen within a closed-loop process, the conversion of the hydrogen, resulting from the oxygen generation via electrolysis, to water. The ARES Payload is foreseen to be installed - in 2012 - onboard the ISS in the Columbus Module. The operation of ARES - in a representative manned microgravity environment - will produce valuable operational data on a system which is based on technologies which are different from other air revitalization systems presently in use. The ARES Technology Demonstrator Payload development started in 2003 with a Phase B, see references [1], [2], [3] and [4]. ARES is presently in Phase C1 and a PDR is scheduled for the beginning of 2009.
Technical Paper

Design Status of ARES for Accomodation on the ISS

2003-07-07
2003-01-2623
During the last years extensive work has been done to design and develop the Closed Loop Air Revitalisation System ARES. The potential of ARES e.g. as part of the ISS ECLSS is to significantly reduce the water upload demand. The current activities concentrate on the development of a full-scale demonstrator with ‘engineering model’ quality. The demonstrator will include the functions of CO2 concentration, CO2 reduction and oxygen generation. All components will fit into one ISPR. The design will minimize the number of external interfaces in order to achieve a high degree of independence with respect to accommodation on the ISS. The paper describes the current development status and touches on critical technology tests for performance optimization.
Technical Paper

Cryo Component Test of Herschel EPLM

2003-07-07
2003-01-2463
The Herschel satellite is a space based telescope designed for the investigation of sub millimeter radiation from astronomical objects. The cryogenic system is an essential part of the telescope’s Extended Payload Module (EPLM). The cryogenic system has to provide an environment of sufficiently low temperatures to assure the proper functioning of the scientific payload. Main component of the cryogenic system is the cryostat, a huge vacuum vessel (see: Figure 1) with various cryogenic components inside. In order to qualify the components of the cryogenic system, multiple tests such as leak tests, thermal cycle tests, pressure cycle tests and vibration tests are performed. In this paper the test program for two cryo components, the rupture disc and a safety valve is discussed. The testing philosophy is presented and selected results of tests at ambient and low temperatures are shown.
Technical Paper

Columbus ECLS Activation and Initial Operations

2008-06-29
2008-01-2135
European Space Agency's (ESA's) Columbus module was launched on February 7, 2008. This marks the completion of more than 10 years of development. It is a major step forward for Europe in the area of Environmental Control and Life Support (ECLS) as Columbus contains several major assemblies which have been developed in Europe. These include the Condensing Heat Exchanger, Condensate Water Separator and the Cabin Fans. The paper gives a short overview of the system and its features and it will report the experiences from the initial activation and operations phase.
Technical Paper

Air Revitalization, an Inevitable Prerequisite for Future Affordable Crewed Missions to Space

2001-07-09
2001-01-2291
The current ECLS baseline of the International Space Station ISS contains an open oxygen loop. Breathable oxygen, generated by electrolysis of water, is supplied to all habitable modules. The crew of max. 7 astronauts converts the oxygen into metabolic carbon dioxide, which needs to be removed from the ISS atmosphere. Adsorption of CO2 is achieved through molecular sieves, desorption of CO2 is conducted by evacuation into space. This open process needs approx. 1500 kg of water upload mass annually. More than 75 % of this upload mass can be saved, if the open oxygen loop will be closed. This paper outlines the closed loop air revitalization system of Astrium, ARES, which has been successfully tested in closed chamber tests. It demonstrates in detail the technical application of ARES on ISS and outlines the commercial benefits. The second part of the paper describes ARES for a Mars habitat with a closed oxygen and hydrogen loop.
X