Search Results

The Learjet 85 is a business jet with an unpowered manual elevator control and is designed for a maximum dive Mach number of 0.89. During the early design, it was found that the stick force required for a 1.5g pull-up from a dive would exceed the limit set by FAA regulations. A design improvement of the tailplane was initiated, using 2D and 3D Navier-Stokes CFD codes. It was discovered that a small amount of positive camber could reduce the elevator hinge moment for the same tail download at high Mach numbers. This was the result of the stabilizer forebody carrying more of the tail download and the elevator carrying less. Consequently, the elevator hinge-moment during recovery from a high-speed dive was lower than for the original tail. Horizontal tails are conventionally designed with zero or negative camber since a positive camber can have adverse effects on tail stall and drag.

Leading edge roughness is known to influence the aerodynamic performance of wings and airfoil sections. Aerodynamic tests show that these effects vary with the type and texture of the applied roughness. The quantification of the relationship between different types of roughness is not very clear. This makes the comparison of results from different tests difficult. An attempt has been made to find a relationship between randomly distributed roughness using cylinders of different heights and densities, roughness using ballotini, and equivalent sand grain roughness. A CFD method based on the Cebeci-Chang roughness model was used to generate correlations with experimental data. It is found that the variation of the size and density of individual roughness elements can be represented using one roughness parameter, Rp, which is equivalent to the sand grain roughness parameter used in the Cebeci-Chang model.

This paper proposes a new methodology to conduct thermal analysis in the conceptual phase of the aircraft development process. Traditionally, thermal analysis is conducted after the system architecture has already been defined. The aircraft system thermal environment evaluation may lead to late design changes that can have a significant impact on the development process. To reduce the risk of late design changes, thermal requirements need to be defined and validated in the conceptual design phase. This research paper introduces a novel multi-level modeling strategy based on a bottom-up approach. It proposes an automatic geometrical simplification procedure for Computational Fluid Dynamic (CFD) analysis, a methodology for the generation of analytical correlations based on highly detailed methods, and a thermal risk assessment approach based on dimensionless numbers.

Aerodynamic drag predictions using the block-structured Euler/Navier-Stokes flow solver FANSC, developed at Bombardier Aerospace for the analysis of the flow around complete aircraft configurations, are presented in this paper. To this end, the traditional far-field method, complemented with semi-empirical relations, is used for evaluating induced, form and viscous drag on a complete aircraft configuration from Euler/boundary-layer flow solutions. Recent advances in Navier-Stokes CFD methods technology are also used to yield near-field integration of the aerodynamic forces. Theoretical developments are briefly discussed on the numerical methods: the basic flow solver (discretization, time-integration, etc…), Euler/boundary-layer coupling methods (direct, semi-inverse and quasi-simultaneous) and Navier-Stokes method. The far-field and near-field drag prediction methods are discussed with emphasis on the relationship they carry with the CFD flow solution.