Refine Your Search

Topic

Search Results

Standard

SPECIFICATION AND INSPECTION OF GLASS FOR INTEGRALLY LIGHTED AEROSPACE INSTRUMENTS

1967-02-01
HISTORICAL
ARP924
This recommended practice covers the requirements for the types of glass to be utilized in the fabrication of cover glasses and lighting wedges used in aerospace instruments. It defines the maximum extent of physical defects and recommend standard methods of inspection and evaluation. Definitions of terminology used in this document are covered in Appendix A.
Standard

Recommended Qualification Tests for Halogen Miniature Lamps Less Than 35 Watts for Aircraft Applications

2006-11-27
HISTORICAL
ARP5297
This SAE Aerospace Recommended Practice (ARP) provides the qualification test procedure requirements for low wattage halogen lamps (less than 35 Watts) intended for use primarily in aircraft applications. The purpose of these tests is to provide a laboratory means of determining the performance characteristics of lamps in airplane power and environmental conditions and to verify the integrity of the lamp design and production process.
Standard

Photometric and Colorimetric Measurement Procedures for Airborne Flat Panel Displays

1998-11-01
HISTORICAL
ARP4260
This SAE Aerospace Recommended Practice (ARP) contains methods used to measure the optical performance of airborne flat panel display (FPD) systems. The methods described are specific to the direct view, liquid crystal matrix (x-y addressable) display technology used on aircraft flight decks. The focus of this document is on active matrix, liquid crystal displays (LCD), however, the majority of the procedures can be applied to other display technologies. The document covers monochrome and color LCD operation in the transmissive mode within the visual spectrum (the wavelength range of 380 to 780 nm). These procedures are adaptable to reflective and transflective displays paying special attention to the source illumination geometry. Generally, the procedures describe manual single point measurements. The individual procedures may be readily incorporated into automated testing equipment (ATE) or other automated environments.
Standard

Passenger Reading Lights

1998-05-01
HISTORICAL
ARP378B
This document presents criteria for design and location of passenger reading lights in commercial aircraft.
Standard

PASSENGER READING LIGHTS

1987-02-23
HISTORICAL
ARP378A
This recommended practice presents criteria for design and location of passenger reading lights in commercial aircraft.
Standard

Night Vision Imaging Systems (NVIS) Integrally Illuminated Information Panels

1995-01-01
HISTORICAL
ARP4967
This document is intended to highlight critical design issues that a panel designer should understand when designing panels for NVIS applications. It is not intended to be a discussion of the benefits of one lighting technology versus another. See ARP4168 for a more complete discussion of these lighting technologies.
Standard

Night Vision Goggles (NVG) Compatible Lighting for Civil Aircraft

2000-04-01
HISTORICAL
AS5452
This SAE Aerospace Standard (AS) will specify what type night vision goggles are required, minimum requirements for compatible crew station lighting, aircraft exterior lighting such as anticollision lights and position/navigation lights that are “NVG compatible.” Also, this document is intended to set standards for NVG utilization for aircraft so that special use aircraft such as the Coast Guard, Border Patrol, Air Rescue, Police Department, Medivacs, etc., will be better equipped to chase drug smugglers and catch illegal immigrants, rescue people in distress, reduce high-speed chases through city streets by police, etc. Test programs and pilot operator programs are required.
Standard

NIGHT VISION GOGGLE (NVG) FILTERS

1988-09-19
HISTORICAL
ARP4169
This ARP discusses the desired characteristics of night vision goggle (NVG) filters that can be used with incandescent, electroluminescent (EL) and light emitting diode (LED) light sources to achieve NVG compatible lighting of aerospace crew stations. This ARP also discusses the parameters that need to be considered when selecting a night vision goggle/daylight viewing (NVG/DV) filter for proper contrast enhancement to achieve readability in daylight.
Standard

NIGHT VISION GOGGLE (NVG) COMPATIBLE LIGHT SOURCES

1988-09-19
HISTORICAL
ARP4168
This ARP covers three common lamp light sources, incandescent, electroluminescent and light emitting diode that, when NVG filtered, can be used to illuminate NVG compatible aerospace crew stations. It is recognized that many other different light sources can also be used for this purpose.
Standard

Lighting, Integral, for Aircraft Instruments: Criteria for Design of Red Lighted Instruments

1967-10-31
HISTORICAL
ARP582A
This ARP covers the general requirements and test procedures for illuminating systems for integrally lighted aircraft instruments in order to provide (a) uniformity of illumination within each instrument, (b) legibility of instrument presentation under daylight or integral light, and (c) uniformity of illumination between instrument displays.
Standard

Lighting, Integral, For Aircraft Instruments: Criteria for Design of Red Incandescent Lighted Instruments

2001-06-01
HISTORICAL
ARP582B
This SAE Aerospace Recommended Practice (ARP) covers the general requirements and test procedures for illuminating systems for integrally lighted aircraft instruments in order to provide (a) uniformity of illumination within each instrument, (b) legibility of instrument presentation under daylight or integral light, and (c) uniformity of illumination between instrument displays.
Standard

Lamps for Aircraft Lighting

1983-01-01
HISTORICAL
ARP881B
This SAE Aerospace Recommended Practice (ARP) lists the lamps in Table 1 that are recommended for the type of service indicated. This list is not intended as a catalog and does not include many types that are now in use. This specification is not applicable to Solid State Lighting Lamp Assemblies (Based LED lamps). It does, however, reflect current practice.
Standard

Lamps for Aircraft Lighting

1965-10-01
HISTORICAL
ARP881
This SAE Aerospace Recommended Practice (ARP) lists the lamps in Table 1 that are recommended for the type of service indicated. This list is not intended as a catalog and does not include many types that are now in use. This specification is not applicable to Solid State Lighting Lamp Assemblies (Based LED lamps). It does, however, reflect current practice.
Standard

Lamps for Aircraft Lighting

1977-06-01
HISTORICAL
ARP881A
This SAE Aerospace Recommended Practice (ARP) lists the lamps in Table 1 that are recommended for the type of service indicated. This list is not intended as a catalog and does not include many types that are now in use. This specification is not applicable to Solid State Lighting Lamp Assemblies (Based LED lamps). It does, however, reflect current practice.
Standard

Lamps for Aircraft Lighting

1991-05-14
HISTORICAL
ARP881C
This SAE Aerospace Recommended Practice (ARP) lists the lamps in Table 1 that are recommended for the type of service indicated. This list is not intended as a catalog and does not include many types that are now in use. This specification is not applicable to Solid State Lighting Lamp Assemblies (Based LED lamps). It does, however, reflect current practice.
Standard

Lamps for Aircraft Lighting

1997-09-01
HISTORICAL
ARP881D
This SAE Aerospace Recommended Practice (ARP) lists the lamps in Table 1 that are recommended for the type of service indicated. This list is not intended as a catalog and does not include many types that are now in use. It does, however, reflect current practice.
X