Refine Your Search

Search Results

Standard

Terminology and Definitions for Aerospace Fluid Power, Actuation and Control Technologies

2010-07-22
HISTORICAL
ARP4386C
This SAE Aerospace Recommended Practice (ARP) comprises the technical terms and nomenclature, together with their definitions and abbreviations that are used in aerospace Fluid Power Actuation and Control Systems. NOTE: When a term is applicable to more than one branch or segment of the technology it may have different meanings and definitions in each. Where this occurs the multiple listings with appropriate designations will be shown under the same primary term.
Standard

Impulse Testing of Aerospace Hydraulic Actuators, Valves, Pressure Containers, and Similar Fluid System Components

2003-02-05
HISTORICAL
ARP1383B
This SAE Aerospace Recommended Practice (ARP) establishes the minimum requirements and procedures for impulse testing of aerospace hydraulic actuators, valves, pressure containers, and similar fluid system components, for use in aerospace hydraulic systems; for exceptions, see paragraph 9.1. This ARP also refers to standard impulse test equipment, which may be used in conducting these impulse tests.
Standard

IMPULSE TESTING OF AEROSPACE HYDRAULIC ACTUATORS, VALVES, PRESSURE CONTAINERS, AND SIMILAR FLUID SYSTEM COMPONENTS

1992-01-01
HISTORICAL
ARP1383A
This SAE Aerospace Recommended Practice (ARP) establishes the minimum requirements and procedures for impulse testing of aerospace hydraulic actuators, valves, pressure containers, and similar fluid system components, except accumulators, for use in aerospace hydraulic systems. It also refers to standard impulse test equipment, which may be used in conducting these impulse tests.
Standard

Graphic Symbols for Aircraft Hydraulic and Pneumatic Systems

2018-01-25
WIP
AS1290C
This Aerospace Standard (AS) presents a system of graphic symbols intended primarily for usage in hydraulic and pneumatic system schematic diagrams for all types of aircraft. It is also considered suitable for marine vehicles and other applications and for ancillary documents where schematics are required. Individual graphic symbols shown herein are also considered suitable for use in conjunction with other types of symbols. This AS is intended to promote industry-wide acceptance and understanding of uniform standards and employs, where possible, symbols which are internationally recognized.
Standard

Graphic Symbols for Aircraft Hydraulic and Pneumatic Systems

2011-12-12
CURRENT
AS1290B
This Aerospace Standard (AS) presents a system of graphic symbols intended primarily for usage in hydraulic and pneumatic system schematic diagrams for all types of aircraft. It is also considered suitable for marine vehicles and other applications and for ancillary documents where schematics are required. Individual graphic symbols shown herein are also considered suitable for use in conjunction with other types of symbols. This AS is intended to promote industry-wide acceptance and understanding of uniform standards and employs, where possible, symbols which are internationally recognized.
Standard

Determination of Hydraulic Pressure Drop

2013-10-04
CURRENT
ARP24E
This SAE Aerospace Recommended Practice (ARP) provides analytical and test methods for determining pressure drop in fluid systems such as hydraulic, fluid, oil, and coolant used in aerospace vehicles. Determining pressure drop by analytical and test results will be discussed.
Standard

Determination of Hydraulic Pressure Drop

2000-11-01
HISTORICAL
ARP24C
This ARP is intended to be a guide for determining pressure drop in fluid systems such as hydraulic, fuel, oil, and coolant used in aerospace vehicles. Determining pressure drop by analytical and test methods will be discussed.
Standard

Determination of Hydraulic Pressure Drop

2005-06-07
HISTORICAL
ARP24D
This SAE Aerospace Recommended Practice (ARP) provides analytical and test methods for determining pressure drop in fluid systems such as hydraulic, fluid, oil, and coolant used in aerospace vehicles. Determining pressure drop by analytical and test results will be discussed.
Standard

Determination of Hydraulic Pressure Drop

1968-01-31
HISTORICAL
ARP24B
This ARP is intended to serve as an instrument to determine hydraulic pressure drop, utilizing the best known practices for accessories in the hydraulic, fuel, oil, and coolant systems to aerospace vehicles.
Standard

Aerospace Hydraulics and Actuation Lessons Learned

2017-02-23
CURRENT
AIR4543/1A
This SAE Aerospace Information Report (AIR) contains Lessons Learned from aerospace actuation, control and fluid power systems technologies. The lessons were prepared by engineers from the aerospace industry and government services as part of the work of SAE Committee A-6, Aerospace Actuation, Control and Fluid Power Systems. Each lesson was presented to the appropriate A-6 technical panel. The technical topics are organized into five sections covering systems, actuation, hydraulic components, electrical components and miscellaneous, each further divided into subsections. The information topics are presented in a concise format of Problem, Issue, Solution and Lesson Learned, often with accompanying descriptive diagrams and illustrations for clarity and understanding.
Standard

Aerospace Hydraulics and Actuation Lessons Learned

2010-11-18
HISTORICAL
AIR4543B
This SAE Aerospace Information Report (AIR) contains Lessons Learned from aerospace actuation, control and fluid power systems technologies. The lessons were prepared by engineers from the aerospace industry and government services as part of SAE Committee A-6, Aerospace Fluid Power, Actuation, and Control Technologies, and were presented to the A-6 during meetings held from 1989 through 1999. The document is organized into five sections covering systems, actuation, hydromechanical components, electrical components and miscellaneous, each further divided into subsections. The lessons are presented in a concise format of Problem, Issue, Solution and Lesson Learned, often with accompanying descriptive diagrams and illustrations for clarity and understanding.
Standard

Aerospace Hydraulics and Actuation Lessons Learned

2017-02-09
CURRENT
AIR4543C
This SAE Aerospace Information Report (AIR) contains Lessons Learned from aerospace actuation, control and fluid power systems technologies. The lessons were prepared by engineers from the aerospace industry and government services as part of SAE Committee A-6, Aerospace Fluid Power, Actuation, and Control Technologies, and were presented to the A-6 during meetings held from 1989 through 1999. The document is organized into five sections covering systems, actuation, hydromechanical components, electrical components and miscellaneous, each further divided into subsections. The lessons are presented in a concise format of Problem, Issue, Solution and Lesson Learned, often with accompanying descriptive diagrams and illustrations for clarity and understanding.
Standard

Aerospace Hydraulics and Actuation Lessons Learned

2000-06-01
HISTORICAL
AIR4543A
This SAE Aerospace Information Report (AIR) contains technical information on aerospace hydraulic, actuation and support equipment technologies lessons learned. The lessons learned were prepared by system designers and hydraulic engineers from the aerospace industry and government services as part of SAE Committee A-6, Aerospace Fluid Power, Actuation, and Control Technologies, and were presented at eight Lessons Learned Symposia from 1989 through 1999 held during A-6 Committee meetings. The technical topics represent many years of design experience in hydraulics and actuation, which it is felt is a resource for learning that should be documented and made available to current and future aerospace hydraulic engineers and designers. The document is organized into two sections: systems and components with further categories within the components section.
Standard

Aerospace Hydraulics and Actuation Lessons Learned

2011-12-12
HISTORICAL
AIR4543/1
This SAE Aerospace Information Report (AIR) contains Lessons Learned from aerospace actuation, control and fluid power systems technologies. The lessons were prepared by engineers from the aerospace industry and government services as part of the work of SAE Committee A-6, Aerospace Actuation, Control and Fluid Power Systems. Each lesson was presented to the appropriate A-6 technical panel. The technical topics are organized into five sections covering systems, actuation, hydraulic components, electrical components and miscellaneous, each further divided into subsections. The information topics are presented in a concise format of Problem, Issue, Solution and Lesson Learned, often with accompanying descriptive diagrams and illustrations for clarity and understanding.
Standard

Aerospace Hydraulic and Pneumatic Specifications, Standards, Recommended Practices, and Information Reports

2020-09-26
WIP
AIR737G
This SAE Aerospace Information Report (AIR) lists military and industry specifications, standards, recommended practices and information reports used in the design of aerospace hydraulic and pneumatic components and systems. It is intended as a supplement to specifications ARP4752, AS5440, and MIL-P-5518. Only those hardware standards specifically applicable to hydraulic or pneumatic components or systems are listed in this document. The purpose of this document is to provide a single document that lists active aerospace hydraulic and pneumatic specifications, standards, recommended practices and information reports.
Standard

Aerospace Hydraulic and Pneumatic Specifications, Standards, Recommended Practices, and Information Reports

2012-08-02
CURRENT
AIR737F
This SAE Aerospace Information Report (AIR) lists military and industry specifications, standards, recommended practices and information reports used in the design of aerospace hydraulic and pneumatic components and systems. It is intended as a supplement to specifications ARP4752, AS5440, and MIL-P-5518. Only those hardware standards specifically applicable to hydraulic or pneumatic components or systems are listed in this document.
Standard

Aerospace Hydraulic and Pneumatic Specifications and Standards

1963-07-01
HISTORICAL
AIR737A
This report lists military and industry specifications and standards which are used in Aero/Space Hydraulic and Pneumatic Systems. It is intended as a supplement to Specifications MIL-H-5440 and MIL-P -5518 . Only those hardware standards which have been specifically designed for hydraulic or pneumatic use are listed. Revisions and amendments which are current for these specifications and standards are not listed.
X