Search Results

This specification covers one type of fuel pressure transmitter designated MS28005-7.

This specification covers one type of fuel pressure transmitter designated MS28005-7.

This SAE Aerospace Recommended Practice (ARP) establishes the requirements for lubricating oil filters for general aviation reciprocating engine applications with lubricating oil systems normally operating in a pressure range of 345 to 689 kPa (50 to100 psig).

This recommended practice establishes the requirements for lubricating oil filters for general aviation reciprocating engine applications with lubricating oil systems normally operating in a pressure range of 50 - 100 psig.

This SAE Aerospace Information Report (AIR) reviews performance testing parameters for non-cleanable (often referred to as disposable) filter elements utilized in aircraft power and propulsion lubrication systems, including gas turbine engines and auxiliary power units (APUs), propulsion and transmission gear boxes, and constant speed drives and integrated drive generators (IDGs). This document is confined to laboratory testing of filter element performance to qualify the filtration medium and filter element construction as opposed to qualification of the complete filter assembly. The testing discussed here is usually followed by laboratory and on-engine testing of the entire lube filter assembly (including filter element, housing, valving, etc.), which is outside the scope of this AIR.

This SAE Aerospace Information Report (AIR) reviews performance testing parameters for fuel filter elements utilized in gas turbine engine and APU main fuel systems. The scope is limited to main fuel filter elements rated at 35 μm(c), or finer, which constitute the majority of contemporary engine main fuel system filtration. This document does not address icing tests specific to fuel filter elements since they are only required for certain engine designs and are custom test procedures. General information on icing tests for aircraft fuel system components can be found in ARP1401. This document also does not address fuel filter elements utilized in fuel hydraulic systems since it is outside the scope of this document, This document is confined to laboratory testing of filter element performance to qualify the filtration medium and filter element construction as opposed to qualification of the complete fuel filter assembly.

This SAE Aerospace Information Report (AIR) discusses the sources of Copper in aviation jet fuels, the impact of Copper on thermal stability of jet fuels and the resultant impact on turbine engine performance, and potential methods for measurement and reduction of the catalytic activity of Copper contamination in jet fuels. This document is an information report and does not provide recommendations or stipulate limits for Copper concentrations in jet fuels.

This document establishes standard gland dimensions for low pressure static radial O-ring seal applications and provides recommendations for modifying these glands in special applications. No provisions are made in this document for anti-extrusion devices.

This SAE Aerospace Recommended Practice (ARP) addresses the characteristics required for the definition, development, and acquisition of a satisfactory airframe mounted accessory gearbox (AMAG).

This document establishes standard gland dimensions for low pressure static radial O-ring seal applications and provides recommendations for modifying these glands in special applications. No provisions are made in this document for anti-extrusion devices.

This SAE Aerospace Recommended Practice (ARP) addresses the characteristics required for the definition, development, and acquisition of a satisfactory airframe mounted accessory gearbox (AMAG).

This document discusses descriptions of fluid contamination products. These contaminants are used for design evaluation and formal component qualification/certification testing. Such tests are routinely performed on candidate aircraft engine fuel and pneumatic system components. Typical of these components are fuel pumps, fuel filters, fuel controls, pressurizing valves, flow dividers, selector valves, and combustor nozzles. The purpose of this document is to recommend standard descriptions to be used by specification writers.

This SAE Aerospace Information Report (AIR) is intended as a guide toward standardization of descriptions and specifications of fluid contamination products.

This specification covers the general design, testing, and safety requirements for aircraft tank mounted fuel booster pumps used for engine fuel feed, transfer, and jettison.

This metric SAE Aerospace Information Report (AIR) details a ball-on-cylinder (BOC) test device and specifies a method of rating the relative lubricity of aviation turbine fuel samples. The BOC produces a wear scar on a stationary steel ball by forcing it with a fixed load against a fuel wetted steel test ring in a controlled atmosphere. The test ring is rotated at a fixed speed so its surface is wetted by a momentary exposure to the fluid under test. The size of the wear scar is a measure of the test fluid lubricity and provides a basis for predicting friction or wear problems.

This metric SAE Aerospace Information Report (AIR) details a ball-on-cylinder (BOC) test device and specifies a method of rating the relative lubricity of aviation turbine fuel samples. The BOC produces a wear scar on a stationary steel ball by forcing it with a fixed load against a fuel wetted steel test ring in a controlled atmosphere. The test ring is rotated at a fixed speed so its surface is wetted by a momentary exposure to the fluid under test. The size of the wear scar is a measure of the test fluid lubricity and provides a basis for predicting friction or wear problems.

This metric Aerospace Information Report (AIR) details a ball-on-cylinder (BOC) test device and specifies a method of rating the relative lubricity of aviation turbine fuel samples. The BOC produces a wear scar on a stationary steel ball by forcing it with a fixed load against a fuel wetted steel test ring in a controlled atmosphere. The test ring is rotated at a fixed speed so its surface is wetted by a momentary exposure to the fluid under test. The size of the wear scar is a measure of the test fluid lubricity and provides a basis for predicting friction or wear problems. This ARP is intended as a guide toward a standard practice, but may be subject to frequent change reflecting experience and technical advances. Use of this AIR is not recommended where flexibility of revision is impractical. Anyone interested in current information on BOC developments and technology should contact the Coordinating Research Council (CRC) Aviation Group on Aviation Fuel Lubricity.

This procedure is intended to apply to all engine or airframe mounted fuel pumps and controls when required by the applicable specification. The procedure recommends a recirculation system similar to ARP492 to control the fuel properties affecting the fluid and its ability to "release" fuel vapors and dissolved air and have these "re-entrained or dissolved" during the fluid recovery process back to the tank and the original starting conditions.

This procedure applies to engine or airframe-mounted fuel pumps. The procedure recommends single-pass operation to minimize changes in fuel properties affecting NPSP capability. An optional method using a recirculation system is also included and may be specified at the discretion of the equipment specification. This procedure defines the recommended test setup, test procedure, data acquisition, and data presentation.

This procedure is intended to apply to fuel pumps. This procedure will be defined in terms of recommended test fluid, test setup, test conditions, and test method. This procedure may be used for other fuel system components, by testing in conjunction with the pump, which normally supplies the component inlet flow, or a substitute test pump of similar capacity. This procedure may be used, with variations in test conditions and test fluid for performing pump evaluation tests. Tests at progressively increasing pump speeds and pressures will provide design limitation data. Alternate test periods on a test pump and another pump, of a design for which actual service durability is known, will provide useful comparison data.