This specification covers two types of refined hydrocarbon compounds in the form of liquids. This product has been used typically as a vehicle for the suspension of magnetic particles used in magnetic particle inspection procedures, but usage is not limited to such applications.
This specification covers the procedure for ultrasonic inspection of wrought titanium and titanium alloy products 0.50 inch (12.7 mm) and over in cross-sectional thickness. This procedure has been used typically for locating internal defects, such as cracks, voids, spongy areas, and other structural discontinuities, which may or may not be exposed to the surface, but usage is not limited to such applications. Testing normally will be by longitudinal wave procedure, but shear wave procedure may be used when agreed upon by purchaser and vendor.
This procedure covers ultrasonic inspection of tubular, centrifugally-cast, corrosion-resistant steel cylinders. This procedure has been used typically for locating defects such as cracks, voids, spongy areas, and other discontinuities, but usage is not limited to such applications. This procedure is not applicable to austenitic steels where grain boundaries mask results. Immersion inspection is applicable to tubular products whose wall thickness is 0.5 to 9.0 inches (13 to 229mm). Contact inspection is applicable to tubular product whose wall thickness is 3.0 to 9.0 inches (76 to 229 mm).
This specification covers procedures for ultrasonic inspection of thin wall metal tubing of titanium, titanium alloy, and corrosion and heat resistant steels and alloys having nominal OD over 0.1875 inch (4.762 mm) with OD to wall thickness ratio of 8 or greater and wall thickness variation not exceeding ±10% of nominal.