Search Results

With the coming of the U.S. Space Station, the testing of the water reclamation system in zero-g could become very important to avoid costly redesigns and logistic problems. There are currently no plans to test the hardware in zero-g for long durations. This paper outlines one possible way to test the potable water reclamation system as a spacelab payload and the hygiene water reclamation system as a middeck payload in zero-g, while using existing National Space Transportation System (NSTS) flight hardware.

The Lithium Hydroxide (LiOH) management plan to control carbon dioxide (CO2) for the Shuttle while docked to the International Space Station (ISS) reduces the mass and volume needed to be launched. For missions before Flight UF-1/STS-108, the Shuttle and ISS each removed their own CO2 during the docked time period. To control the CO2 level, the Shuttle used LiOH canisters and the ISS used the Vozdukh or the Carbon Dioxide Removal Assembly (CDRA) with the Vozdukh being the primary ISS device for CO2 removal. Analysis predicted that both the Shuttle and Station atmospheres could be controlled using the Station resources with only the Vozdukh and the CDRA. If the LiOH canisters were not needed for the CO2 control on the Shuttle during the docked periods, then the mass and volume from these LiOH canisters normally launched on the Shuttle could be replaced with other cargo.

The Core Complete Environmental Control and Life Support (ECLS) system for the International Space Station (ISS) will consist of components and subsystems in both the United States (U.S.) and International Partner elements which together will perform the functions of Temperature and Humidity Control (THC), Atmosphere Control and Supply (ACS), Atmosphere Revitalization (AR), Water Recovery and Management (WRM), Fire Detection and Suppression (FDS), and Vacuum System (VS) for the station. Due to limited resources available on ISS, detailed attention is given to minimizing and tracking all resources associated with all systems, beginning with estimates during the hardware development phase through measured actuals when flight hardware is built and delivered. A summary of resources consumed by the current and by the addition of future U.S.

The assembly complete Environmental Control and Life Support (ECLS) system for the International Space Station (ISS) will consist of components and subsystems in both the U.S. and International partner elements which together will perform the functions of Temperature and Humidity Control (THC), Atmosphere Control and Supply (ACS), Atmosphere Revitalization (AR), Water Recovery and Management (WRM), Waste Management (WM), Fire Detection and Suppression (FDS), and Vacuum System (VS) for the station. Due to limited resources available on ISS, detailed attention is given to minimizing and tracking all resources associated with all systems, beginning with estimates during the hardware development phase through measured actuals when flight hardware is built and delivered. A comprehensive summary of resources consumed by the U.S.

The assembly complete Environmental Control and Life Support (ECLS) system for the International Space Station (ISS) will consist of components and subsystems in both the U.S. and International partner elements which together will perform the functions of Temperature and Humidity Control (THC), Atmosphere Control and Supply (ACS), Atmosphere Revitalization (AR), Water Recovery and Management (WRM), Fire Detection and Suppression (FDS), and Vacuum System (VS) for the station. Due to limited resources available on ISS, detailed attention is given to minimizing and tracking all resources associated with all systems, beginning with estimates during the hardware development phase through measured actuals when flight hardware is built and delivered. A summary of resources consumed by the current on-orbit U.S. ECLS system hardware is presented, including launch weight, average continuous and peak power loads, on-orbit volume and resupply logistics.

The International Space Station (ISS) program is nearing an assembly complete configuration with the addition of the final resource node module in early 2010. The Node 3 module will provide critical functionality in support of permanent long duration crews aboard ISS. The new module will permanently house the regenerative Environment Control and Life Support Systems (ECLSS) and will also provide important habitability functions such as waste management and exercise facilities. The ISS program has selected the Port side of the Node 1 “Unity” module as the permanent location for Node 3 which will necessitate architecture changes to provide the required interfaces. The USOS ECLSS fluid and ventilation systems, Internal Thermal Control Systems, and Avionics Systems require significant modifications in order to support Node 3 interfaces at the Node 1 Port location since it was not initially designed for that configuration.

This paper will provide an overview of the International Space Station (ISS) Environmental Control and Life Support (ECLS) design of the Node 1 Sample Delivery Subsystem (SDS) and it will document some of the lessons that have been learned to date for this part of the subsystem.

This paper will provide an overview of the International Space Station (ISS) Environmental Control and Life Support (ECLS) design of the Node 1 Fire Detection and Suppression (FDS) subsystem and it will document some of the lessons that have been learned to date for this subsystem.

This paper will provide an overview of the International Space Station (ISS) Environmental Control and Life Support (ECLS) design of the Crew Health Care System (CHeCS) Rack 1 and it will document some of the lessons that have been learned to date for the ECLS equipment in this rack.

The International Space Station (ISS) recycles water. The environmental control and life support system is not currently a closed loop system. Oxygen must be resupplied on-orbit. ISS has Airlock tank oxygen, a Russian oxygen generator-Elektron, and Progress vehicle tank oxygen. The oxygen generator converts water into oxygen. About half of the resupplied water aboard ISS is used for oxygen generation. Past water usage predictions have not reflected times when the oxygen generator is on versus off. This can lead to over-predicting water resupply. The water usage analysis calculates water usage from Progress vehicle resupply and oxygen generation from January 2003 to March 2004. The analysis shows the impacts of filling the Progress vehicles with oxygen. The analysis will determine the correlation between the Elektron water usage by the manual calculation method versus using Elektron current telemetry method.

The International Space Station (ISS) recycles water to reduce the expense of launching water on resupply vehicles. However, since these recovery systems cannot recover 100% of all water used, some resupply is needed. Water consumption, as well as water recovery, varies from crew to crew making it difficult to judge how much water is needed and when. Therefore, the ground team tracks the water usage of the crew and determines a representative rate to predict each Expedition's water needs and identify trends in changing rates. This paper describes the analyses conducted to determine how much water each crew is using for drinking and hygiene purposes and how much is used for oxygen generation. It will also show how the water usage evolved over the last three Expeditions and compare these results to the published consumables tracking reports and the Russian water specialist reports.

The International Space Station (ISS) supplies and recycles water. Until the water system loop is closed with 100 percent recycling, monitoring water usage on-orbit is critical. The water supply on-orbit is monitored to stay above the skip cycle. If the rate is higher than predicted, then the water supply may become too low to support the crew. Both U.S. and Russian water experts use the water usage rate to determine the quantity of water to be re-supplied on each vehicle. The paper provides an overview of the ISS water system. It discusses the newly revised water balance. The paper describes the methodology used to calculate water usage rates. The analysis provides the water usage rates for each Expedition crew. The analysis compares these results to the consumable reports and the Russian water expert reports. The paper provides a discussion of the results of the various usage rates. It provides the most accurate methods for assessing water usage.

The International Space Station (ISS) recycles water. The crew water usage is tracked by Expedition to ensure that there is enough water. The Water Use for Oxygen Generation paper [1] presented at ICES in 2004 is updated as part of this water usage analysis. The analysis will determine how much water each crewmember is consuming for drinking water and hygiene. The analysis will determine how much water has been used for oxygen generation. In addition, the analysis will show how the water usage evolved for each Expedition. The analysis will also compare theses results to the consumable reports and the Russian water expert reports.

The International Space Station (ISS) water balance is evolving throughout the assembly phase. The ISS and its environmental control system become progressively more complex as new modules are added. This build-up results in various forms of water supply and water consumption rates. The Russian and United States water balances are integrated to form an ISS water balance. The changes in the water balance as the ISS grows and as the crew complement changes are discussed. The actual versus predicted usage rates are shown through each expedition crew.

The International Space Station (ISS) Node 1 Environmental Control and Life Support (ECLS) System is comprised of five subsystems: Atmosphere Control and Supply (ACS), Atmosphere Revitalization (AR), Fire Detection and Suppression (FDS), Temperature and Humidity Control (THC), and Water Recovery and Management (WRM). This paper provides a summary of the nominal operation of the Node 1 THC subsystem design. The paper will also provide a discussion of the detailed Element Verification methodologies for nominal operation of the Node 1 THC subsystem operations utilized during the Qualification phase.

The International Space Station (ISS) Environmental Control and Life Support (ECLS) system includes regenerative and non-regenerative technologies that provide the basic life support functions to support the crew, while maintaining a safe and habitable shirtsleeve environment. This paper provides a summary of the U.S. ECLS system activities over the past year, covering the period of time between March 2008 and February 2009. The ISS continued permanent crew operations, with the continuation of Phase 3 of the ISS Assembly Sequence. Work continues on the last of the Phase 3 pressurized elements and the continued manufacturing and testing of the regenerative ECLS equipment.

The International Space Station (ISS) Environmental Control and Life Support (ECLS) system includes regenerative and non-regenerative technologies that provide the basic life support functions to support the crew, while maintaining a safe and habitable shirtsleeve environment. This paper provides a summary of the U.S. ECLS system activities over the past year, covering the period of time between March 2007 and February 2008. The ISS continued permanent crew operations, with the continuation of Phase 3 of the ISS Assembly Sequence. Work continues on the last of the Phase 3 pressurized elements and the continued manufacturing and testing of the regenerative ECLS equipment.

The International Space Station (ISS) Environmental Control and Life Support (ECLS) system includes regenerative and non-regenerative technologies that provide the basic life support functions to support the crew, while maintaining a safe and habitable shirtsleeve environment. This paper provides a summary of the U.S. ECLS system activities over the past year, covering the period of time between March 2006 and February 2007. The ISS continued permanent crew operations, with the start of Phase 3 of the ISS Assembly Sequence. Work continued on the Phase 3 pressurized elements and the continued manufacturing and testing of the regenerative ECLS equipment.

The International Space Station (ISS) Environmental Control and Life Support (ECLS) system includes regenerative and non-regenerative technologies that provide the basic life support functions to support the crew, while maintaining a safe and habitable shirtsleeve environment. This paper provides a summary of the U.S. ECLS system activities over the past year, covering the period of time between March 2005 and February 2006. The ISS continued permanent crew operations, with the start of Phase 3 of the ISS Assembly Sequence. Work continued on the Phase 3 pressurized elements and the continued manufacturing and testing of the regenerative ECLS equipment.

The International Space Station (ISS) Environmental Control and Life Support (ECLS) system includes regenerative and non-regenerative technologies that provide the basic life support functions to support the crew, while maintaining a safe and habitable shirtsleeve environment. This paper provides a summary of the U.S. ECLS system activities over the past year, covering the period of time between March 2004 and February 2005. The ISS continued permanent crew operations, with the start of Phase 3 of the ISS Assembly Sequence. Work continued on the Phase 3 pressurized elements and the continued manufacturing and testing of the regenerative ECLS equipment.